Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticl...Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.展开更多
This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & sil...This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.展开更多
This work aims to study the solvent’s effect on the structural, morphological, and optical properties of Mg-doped zinc oxide (MZO) thin films. The results of the XRD analysis revealed that the 2-methoxyethanol solven...This work aims to study the solvent’s effect on the structural, morphological, and optical properties of Mg-doped zinc oxide (MZO) thin films. The results of the XRD analysis revealed that the 2-methoxyethanol solvent imparts a preferential orientation to the MZO samples, following the (002) plane, with a maximum value observed at 2% Mg. In contrast, the samples prepared using methanol show no preferential orientation. SEM analysis corroborated that the use of 2-methoxyethanol results in an orderly distribution of MZO crystallites. The optical characterization indicated that the transmittance of MZO thin films reached a maximum value of 90% for Mg concentrations ranging from 2% to 3%. At the same time, the refractive index showed its lowest value of 1.46. In contrast, the use of methanol as a solvent resulted in a maximum transmittance of 80% at 4% Mg, accompanied by a minimum refractive index value of 1.96.展开更多
文摘Ferromagnetic Fe3O4 nanoparticles were synthesized using water as the solvent through the sol-gel method, which was selected for its cost-effectiveness, simplicity, and eco-friendly nature. The synthesized nanoparticles were characterized using a variety of techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), and Vibrating Sample Magnetometer (VSM). These characterizations confirmed the successful formation of Fe3O4 nanoparticles. The FTIR spectra identified characteristic peaks corresponding to the functional groups present, and XRD analysis, using Scherer’s equation, determined an average crystalline size of 1.2 nm for the Fe3O4 nanoparticles. TGA results demonstrated the thermal stability of the nanoparticles, SEM imaging revealed distinct honeycomb-like structures for the nanoparticles synthesized with water as the solvent, while the VSM analysis was used to determine the magnetic behavior of the nanoparticles.
文摘This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.
文摘This work aims to study the solvent’s effect on the structural, morphological, and optical properties of Mg-doped zinc oxide (MZO) thin films. The results of the XRD analysis revealed that the 2-methoxyethanol solvent imparts a preferential orientation to the MZO samples, following the (002) plane, with a maximum value observed at 2% Mg. In contrast, the samples prepared using methanol show no preferential orientation. SEM analysis corroborated that the use of 2-methoxyethanol results in an orderly distribution of MZO crystallites. The optical characterization indicated that the transmittance of MZO thin films reached a maximum value of 90% for Mg concentrations ranging from 2% to 3%. At the same time, the refractive index showed its lowest value of 1.46. In contrast, the use of methanol as a solvent resulted in a maximum transmittance of 80% at 4% Mg, accompanied by a minimum refractive index value of 1.96.
