The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displace...The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.展开更多
The Bouguer gravity anomaly data of Sichuan-Yunnan region and its vicinity were analyzed with wavelet trans- formation method. In the process, complete orthogonal wavelet function system with good symmetry and higher ...The Bouguer gravity anomaly data of Sichuan-Yunnan region and its vicinity were analyzed with wavelet trans- formation method. In the process, complete orthogonal wavelet function system with good symmetry and higher vanishing moment was selected to decompose the gravity anomaly into two parts. With the power spectral analysis on the decomposed anomalies, we interpreted that the two parts of anomalies represent the density variation in upper and middle crust, and in deep crust and uppermost mantle, respectively. The two parts of anomalies indicate the difference between shallow and deep tectonics. The results of shallow-layer apparent density mapping reveal that: a) the crustal density in Sichuan basin is higher than that in Songpan-Garze orogenic zone; b) the density of Kangdian rhombic block is heterogeneous; c) the boundary faults of Kangdian block are of different density fea- tures, suggesting different tectonic signification. The results of deep-layer apparent density mapping show a similar, but not the same, density distribution pattern as the shallow results, and indicate that the tectonics of shallow and deep crust are different, they may be in a status of incomplete coupling. Our results also show that the earthquakes in this area are controlled not only by the fracture zones but also by the deep density distribution.展开更多
Based on analyzing space inhomogeneous image of strong earthquake activity, the image of source rupture and the mechanical property of the source fault in Sichuan-Yunnan region, the relations among the strong earthqua...Based on analyzing space inhomogeneous image of strong earthquake activity, the image of source rupture and the mechanical property of the source fault in Sichuan-Yunnan region, the relations among the strong earthquake activity, active fault, modern movement status of active blocks and structural background of the deep media have been discussed, and the characteristics of strong earthquake activity and possible mechanism have been also discussed.展开更多
Using the method of Single-link Cluster(SLC),analyzing the pattern of time sliding of SLCparameters,the earthquake activity in the western Sichuan-Yunnan of China is studiedcombining with the regional earthquake catal...Using the method of Single-link Cluster(SLC),analyzing the pattern of time sliding of SLCparameters,the earthquake activity in the western Sichuan-Yunnan of China is studiedcombining with the regional earthquake catalogue since 1970 and the tectonic background.Comparing with the high level of earthquake activity in 1970’s and the low in 1980’s,theearthquake activity is in general at the middle level in 1990’s.This paper suggests that SLCmethod,which considers the temporal and spatial relationship among earthquake events,could be adopted to analyze the trend of regional earthquake activity,it is very useful forstudying seismic activity.展开更多
On the basis of distribution of active fault and regional rheological structure, a three-dimensional finite element model of Sichuan-Yunnan region, China, is constructed to simulate contemporary crustal motion and str...On the basis of distribution of active fault and regional rheological structure, a three-dimensional finite element model of Sichuan-Yunnan region, China, is constructed to simulate contemporary crustal motion and stress distribution and discuss the dynamic mechanism of crustal motion and deformation in the Sichuan-Yunnan region. Linear Maxwell visco-elastic model is applied, which includes the active fault zones, the elastic upper crust and viscous lower crust and upper mantle. Four different models with different boundary conditions and deep structure are calculated. Some conclusions are drawn through comparison. Firstly, the crustal rotation about the eastern syntaxis of the Himalaya in the Sicuan-Yunnan region may be controlled by the special dynamic boundary condition. The drag force of the lower-crust on the upper crust is not negligible. At the same time, the main active fault zones play an important role in the contemporary crustal motion and deformation in Sichuan-Yunnan region.展开更多
Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for ca...Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.展开更多
Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_...Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_S8.0 earthquake,we built a three-dimensional viscoelastic finite element model of the crust in the Sichuan-Yunnan region.The postseismic impact of the Wenchuan M_S8.0 earthquake on the Sichuan-Yunnan region was studied.The results show that:①The far-field horizontal deformation caused by the viscoelastic relaxation of the medium in the 10 years after the earthquake is about 0-20 mm within the Sichuan-Yunnan diamond-shaped block,which has a greater influence on north side and smaller on south side.②In the 10 years after the earthquake,the far-field vertical deformation caused by the viscoelastic relaxation effect of the medium is small,and it shows an increase of about 0-4 mm in most areas of the Sichuan-Yunnan diamond-shaped block.③The Xianshuihe fault and the eastern segment of the East Kunlun fault,which are close to the seismogenic fault,show a high gradient on deformation fields after the earthquake.④In order to compare with the strong earthquake activity in the SichuanYunnan region after the Wenchuan earthquake,the horizontal stress state and the Coulomb failure stress change of the active block boundary are also calculated.From the spatial distribution of the coseismic and postseismic displacement field,the fault activity characteristics reflected by the stress state and the stress loading of the fault layer reflected by the Coulomb failure stress change,there is a certain correlation with the spatial distribution of strong earthquake activity in this region.展开更多
In this paper,the long time series data of the well water-level data of 12 wells in the Sichuan and Yunnan area is analyzed by the Baytap-G tidal analysis software,and well water level tidal response characteristic pa...In this paper,the long time series data of the well water-level data of 12 wells in the Sichuan and Yunnan area is analyzed by the Baytap-G tidal analysis software,and well water level tidal response characteristic parameters( amplitude ratio and phase change)are extracted. We analyzed the features of the shape and stage change,and characteristic parameters of the tidal response of well water level before and after the earthquakes,which can provide a new method and approach to analyzing the response relationships between well water level and earth tide and barometric pressure. The results show that Luguhu Well and 9 other wells are affected by earth tides,and their well water level amplitude ratios and phases are relatively stable; the Nanxi Well and Dayao Well water level changes are affected by the barometric pressure combined with tide force,and their well water level amplitude ratios and phases are more discrete. The water level amplitude ratios and phases of Jiangyou Well,Luguhu Well and Dongchuan Well are significant to large earthquakes,and the relationship between seismic energy density and water level amplitude ratios and phases of M_2 wave of the three wells are presented.展开更多
Sichuan-Yunnan region in China, a tectonic transition belt where earthquakes occurred frequently and intensely, has a distinct variation characteristic of gradient zone of Bouguer gravity anomaly （BGA）. Many deep fa...Sichuan-Yunnan region in China, a tectonic transition belt where earthquakes occurred frequently and intensely, has a distinct variation characteristic of gradient zone of Bouguer gravity anomaly （BGA）. Many deep faults and epicenters of severe earthquake scatter along the BGA gradient zones. Here we apply two forward models （Airy model and Vening Meinesz model） of isostatic gravity mechanisms （local versus regional） in this region to calculated the isostatic gravity anomaly （IGA）. Afterwards, the relationship between IGA and distribution of faults as well as seismicity is also illustrated. The IGA results show that the two models are similar and most parts of the study area are in an isostatic state. Most featured faults are distributed along the steep anomaly gradient zones; earthquakes tend to occur in the non-isostatic area and steep gradient belt of IGA. The distribution of root thickness based on regional mechanism can be associated with the main trend of BGA variation. The regional mechanism is more plausible and closer to the reality because of its relatively further consideration of the horizontal forces derived from adjacent particles in the crust. Then we analyze the effect of isostasy on the tectonic movements and find that the isostatic adjustment is not the main cause of the continuous uplift process of Longmenshan Mountain fault zone. which is due to the Indian-Eurasian continental collision.展开更多
基金Basic research program from Institute of Earthquake Science China Earthquake Administration (690206)Social Welfare Research Program from Ministry of Science and Technology of China (2005DIB3J119)
基金supported by the Key Project of Chinese Programs for Fundamental Research and Development (2004CB418406)
文摘The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.
基金National Natural Science Foundation of China (403334041)
文摘The Bouguer gravity anomaly data of Sichuan-Yunnan region and its vicinity were analyzed with wavelet trans- formation method. In the process, complete orthogonal wavelet function system with good symmetry and higher vanishing moment was selected to decompose the gravity anomaly into two parts. With the power spectral analysis on the decomposed anomalies, we interpreted that the two parts of anomalies represent the density variation in upper and middle crust, and in deep crust and uppermost mantle, respectively. The two parts of anomalies indicate the difference between shallow and deep tectonics. The results of shallow-layer apparent density mapping reveal that: a) the crustal density in Sichuan basin is higher than that in Songpan-Garze orogenic zone; b) the density of Kangdian rhombic block is heterogeneous; c) the boundary faults of Kangdian block are of different density fea- tures, suggesting different tectonic signification. The results of deep-layer apparent density mapping show a similar, but not the same, density distribution pattern as the shallow results, and indicate that the tectonics of shallow and deep crust are different, they may be in a status of incomplete coupling. Our results also show that the earthquakes in this area are controlled not only by the fracture zones but also by the deep density distribution.
基金"Strong Earthquake Mechanism and Forecast in China’s Continent(95-13-05-05)and the Natural Science Funds of Yunnan Province(97D015G),China.
文摘Based on analyzing space inhomogeneous image of strong earthquake activity, the image of source rupture and the mechanical property of the source fault in Sichuan-Yunnan region, the relations among the strong earthquake activity, active fault, modern movement status of active blocks and structural background of the deep media have been discussed, and the characteristics of strong earthquake activity and possible mechanism have been also discussed.
基金This research was sponsored by the key project of the Joint Earthquake Science Foundaion of China (95-07-01425) and the National Science Foundation of China (49674214).
文摘Using the method of Single-link Cluster(SLC),analyzing the pattern of time sliding of SLCparameters,the earthquake activity in the western Sichuan-Yunnan of China is studiedcombining with the regional earthquake catalogue since 1970 and the tectonic background.Comparing with the high level of earthquake activity in 1970’s and the low in 1980’s,theearthquake activity is in general at the middle level in 1990’s.This paper suggests that SLCmethod,which considers the temporal and spatial relationship among earthquake events,could be adopted to analyze the trend of regional earthquake activity,it is very useful forstudying seismic activity.
基金Ministry of Science and Technology (2004CB418406, 2005DKA64000)the Basic Science Research Plan of the Institute of Earthquake Science, China Earthquake Administration (02076902-03).
文摘On the basis of distribution of active fault and regional rheological structure, a three-dimensional finite element model of Sichuan-Yunnan region, China, is constructed to simulate contemporary crustal motion and stress distribution and discuss the dynamic mechanism of crustal motion and deformation in the Sichuan-Yunnan region. Linear Maxwell visco-elastic model is applied, which includes the active fault zones, the elastic upper crust and viscous lower crust and upper mantle. Four different models with different boundary conditions and deep structure are calculated. Some conclusions are drawn through comparison. Firstly, the crustal rotation about the eastern syntaxis of the Himalaya in the Sicuan-Yunnan region may be controlled by the special dynamic boundary condition. The drag force of the lower-crust on the upper crust is not negligible. At the same time, the main active fault zones play an important role in the contemporary crustal motion and deformation in Sichuan-Yunnan region.
基金State Key Basic Research Development Program (2004CB418404) and the Joint Seismological Science Foundation of China (105004).
文摘Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.
基金the Seismological Science and Technology Spark Program of the China Earthquake Administration，“A Study of the Impacts and Observations of the Wenchuan Earthquake on the Post-earthquake in the Sichuan-Yunnan Region”(XH16058Y)the Youth Earthquake Tracking Project of the China Earthquake Administration Monitoring and Forecasting Division(2017010219)
文摘Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_S8.0 earthquake,we built a three-dimensional viscoelastic finite element model of the crust in the Sichuan-Yunnan region.The postseismic impact of the Wenchuan M_S8.0 earthquake on the Sichuan-Yunnan region was studied.The results show that:①The far-field horizontal deformation caused by the viscoelastic relaxation of the medium in the 10 years after the earthquake is about 0-20 mm within the Sichuan-Yunnan diamond-shaped block,which has a greater influence on north side and smaller on south side.②In the 10 years after the earthquake,the far-field vertical deformation caused by the viscoelastic relaxation effect of the medium is small,and it shows an increase of about 0-4 mm in most areas of the Sichuan-Yunnan diamond-shaped block.③The Xianshuihe fault and the eastern segment of the East Kunlun fault,which are close to the seismogenic fault,show a high gradient on deformation fields after the earthquake.④In order to compare with the strong earthquake activity in the SichuanYunnan region after the Wenchuan earthquake,the horizontal stress state and the Coulomb failure stress change of the active block boundary are also calculated.From the spatial distribution of the coseismic and postseismic displacement field,the fault activity characteristics reflected by the stress state and the stress loading of the fault layer reflected by the Coulomb failure stress change,there is a certain correlation with the spatial distribution of strong earthquake activity in this region.
基金sponsored by the Spark Program of Earthquake Technology of CEA in 2017(XH17026)Combination Project with Monitoring,Prediction and Scientific Research of Earthquake Technology,CEA(162205)
文摘In this paper,the long time series data of the well water-level data of 12 wells in the Sichuan and Yunnan area is analyzed by the Baytap-G tidal analysis software,and well water level tidal response characteristic parameters( amplitude ratio and phase change)are extracted. We analyzed the features of the shape and stage change,and characteristic parameters of the tidal response of well water level before and after the earthquakes,which can provide a new method and approach to analyzing the response relationships between well water level and earth tide and barometric pressure. The results show that Luguhu Well and 9 other wells are affected by earth tides,and their well water level amplitude ratios and phases are relatively stable; the Nanxi Well and Dayao Well water level changes are affected by the barometric pressure combined with tide force,and their well water level amplitude ratios and phases are more discrete. The water level amplitude ratios and phases of Jiangyou Well,Luguhu Well and Dongchuan Well are significant to large earthquakes,and the relationship between seismic energy density and water level amplitude ratios and phases of M_2 wave of the three wells are presented.
基金supported by the China Earthquake Administration,Institute of Seismology Foundation(IS201416141)Spark Plan(XH17022)
文摘Sichuan-Yunnan region in China, a tectonic transition belt where earthquakes occurred frequently and intensely, has a distinct variation characteristic of gradient zone of Bouguer gravity anomaly （BGA）. Many deep faults and epicenters of severe earthquake scatter along the BGA gradient zones. Here we apply two forward models （Airy model and Vening Meinesz model） of isostatic gravity mechanisms （local versus regional） in this region to calculated the isostatic gravity anomaly （IGA）. Afterwards, the relationship between IGA and distribution of faults as well as seismicity is also illustrated. The IGA results show that the two models are similar and most parts of the study area are in an isostatic state. Most featured faults are distributed along the steep anomaly gradient zones; earthquakes tend to occur in the non-isostatic area and steep gradient belt of IGA. The distribution of root thickness based on regional mechanism can be associated with the main trend of BGA variation. The regional mechanism is more plausible and closer to the reality because of its relatively further consideration of the horizontal forces derived from adjacent particles in the crust. Then we analyze the effect of isostasy on the tectonic movements and find that the isostatic adjustment is not the main cause of the continuous uplift process of Longmenshan Mountain fault zone. which is due to the Indian-Eurasian continental collision.
