Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect ...Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect on properties of ceramics.This study investigated the crucial sintering temperature for 3D printed ceramics to ensure the desired properties.The results indicate that all samples exhibit a consistent layered structure across the experimental sintering temperatures.When the sintering temperature is increased from 1,250℃ to 1,350℃,the grain's morphology changes from spherical to plate-like.Surface morphology analysis reveals a decrease in surface roughness at sintering temperatures above 1,350℃.Mechanical tests show improved flexural strength and stiffness as the sintering temperature rises.Friction and wear experiments demonstrate that as the sintering temperature increases from 1,450℃ to 1,550℃,the wear pattern on ceramic surfaces transitions from deep pits to shallow grooves.The increase in sintering temperature effectively enhances the wear resistance of 3D printed alumina ceramics.This improvement plays a significant role in expanding the application field of these ceramics,prolonging the lifespan of parts,reducing production costs,enhancing performance,and promoting environmental protection.In this study,ceramics achieve the highest strength and best wear resistance when sintered at 1,600℃,resulting in the best overall performance.展开更多
Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explo...Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.展开更多
WC-Co nanocrystalline nitrogen-containing cemented carbides were prepared by vacuum sintering and low pressure sintering.The sintering processes of Cr_(2)(C,N)doped nano WC-Co powders were studied by using thermogravi...WC-Co nanocrystalline nitrogen-containing cemented carbides were prepared by vacuum sintering and low pressure sintering.The sintering processes of Cr_(2)(C,N)doped nano WC-Co powders were studied by using thermogravimetric analysis(TGA)and differential scanning calorimetry(DSC).The effect of sintering temperature on the microstructure and mechanical properties of nanocrystalline cemented carbide was studied by scanning electron microscope(SEM),high resolution transmission electron microscope(HRTEM)and mechanical property test.The results showed that the nano WC grains began to grow in the solid phase sintering stage.A high-performance nano-nitrogen-containing cemented carbide with uniform microstructure and good interfacial bonding can be obtained by increasing the sintering temperature to 1380℃.It has a transverse rupture strength(TRS)of 5057 MPa and a hardness of 1956 HV30.展开更多
Ceramic dielectric materials with high dielectric strength and mechanisms of their internal factors affecting dielectric strength are significantly valuable for industrial application,especially for selection of suita...Ceramic dielectric materials with high dielectric strength and mechanisms of their internal factors affecting dielectric strength are significantly valuable for industrial application,especially for selection of suitable dielectric materials for high-power microwave transmission devices and reliable power transmission.Pure magnesium oxide(MgO),a kind of ceramic dielectric material,possesses great application potential in high-power microwave transmission devices due to its high theoretical dielectric strength,low dielectric constant,and low dielectric loss properties,but its application is limited by high sintering temperature during preparation.This work presented the preparation of a new type of multiphase ceramics based on MgO,which was MgO-1%ZrO_(2)-1%CaCO_(3-x)%MnCO_(3)(MZCM_(x),x=0,0.25,0.50,1.00,1.50,in molar),and their phase structures,morphological features,and dielectric properties were investigated.It was found that inclusion of ZrO_(2) and CaCO_(3) effectively inhibited excessive growth of MgO grains by formation of second phase,while addition of MnCO_(3) promoted the grain boundary diffusion process during the sintering process and reduced activation energy for the grain growth,resulting in a lower ceramic sintering temperature.Excellent performance,including high dielectric strength(Eb=92.3 kV/mm)and quality factor(Q×f=216642 GHz),simultaneously accompanying low dielectric loss(<0.03%),low temperature coefficient of dielectric constant(20.3×10^(–6)℃^(–1),85℃)and resonance frequency(–12.54×10^(–6)℃^(–1)),was achieved in MZCM1.00 ceramics under a relatively low sintering temperature of 1350℃.This work offers an effective solution for selecting dielectric materials for high-power microwave transmission devices.展开更多
Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley a...Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.展开更多
We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) change...We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.展开更多
Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusi...Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.展开更多
Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability o...Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely reported.Herein,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock method.Such a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1) at 2 A g^(−1))at−60℃,outperforming all reported SIB anode materials.Coupled with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1) at−40°C.Based on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.展开更多
Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crac...Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.展开更多
This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junctio...This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.展开更多
The use of lithium-sulfur(Li-S)batteries is limited by sulfur redox reactions involving multi-phase transformations,especially at low-temperatures.To address this issue,we report a material(FCNS@NCFs)consisting of nit...The use of lithium-sulfur(Li-S)batteries is limited by sulfur redox reactions involving multi-phase transformations,especially at low-temperatures.To address this issue,we report a material(FCNS@NCFs)consisting of nitrogen-doped carbon fibers loaded with a ternary metal sulf-ide((Fe,Co,Ni)_(9)S_(8))for use as the sulfur host in Li-S batteries.This materi-al was prepared using transfer blot filter paper as the carbon precursor,thiourea as the source of nitrogen and sulfur,and FeCl_(3)·6H_(2)O,CoCl_(2)·6H_(2)O and NiCl_(2)·6H_(2)O as the metal ion sources.It was synthesized by an impreg-nation method followed by calcination.The nitrogen doping significantly in-creased the conductivity of the host,and the metal sulfides have excellent catalytic activities.Theoretical calculations,and adsorption and deposition experiments show that active sites on the surface of FCNS@NCFs selectively adsorb polysulfides,facilitate rapid adsorption and conversion,prevent cathode passivation and inhib-it the polysulfide shuttling.The FCNS@NCFs used as the sulfur host has excellent electrochemical properties.Its initial dis-charge capacity is 1639.0 mAh g^(−1) at 0.2 C and room temperature,and it remains a capacity of 1255.1 mAh g^(−1) after 100 cycles.At−20~C,it has an initial discharge capacity of 1578.5 mAh g^(−1) at 0.2 C,with a capacity of 867.5 mAh g^(−1) after 100 cycles.Its excellent performance at both ambient and low temperatures suggests a new way to produce high-performance low-temper-ature Li-S batteries.展开更多
The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel ...The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel field may require an understanding of how solar radiation oscillates with other variables or factors since multiple interactions occur during its transfer within the atmosphere. In this study, three years of the incoming shortwave radiation (SWin) and air temperature (Tair) data acquired within the “Institut de Mathématiques et de Sciences Physiques” were analyzed using the continuous wavelet transform to extract the inherent variability of these signals. The underlying characteristics meaning the timescale of these variabilities as well as the lead-lag relationship between SWin and Tair were also examined. With the wavelet power spectrum, the highest variability was evidenced at the 2 - 8 band period for the SWin, coinciding almost with that of Tair. This suggests that these two signals are well interconnected at this temporal scale. The results obtained with the phase (∅xy) difference analysis, reveal that SWin leads Tair by ~ 23.5˚ on average when (0 ∅xy∅xyi.e., periods ≤ 32 days), Tair increases with an increasing SWin since the lags between these two signals range between 0.09 - 2.30 days. However, when looking at their interdependence at a larger temporal scale (> 32 days), Tair lags SWin. An increase in SWin might not directly imply an increase in Tair. Overall, these findings give insight into complex relationships across scales between the incoming shortwave radiation and air temperature in a tropical humid region of Bénin.展开更多
The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and ...The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and Tabouk. Employing the super epoch analysis method, the study concentrated on altitudes of 5 km and 10 km, uncovering significant variations. Seasonal and synoptic-scale variations were considered and excluded when necessary across eight 9-day periods. Both locations showed considerable fluctuations in pressure and temperature before and after the events. At 5 km altitude (21 events), Abha experienced more pressure increases both before (9 vs. 7) and after (12 vs. 11) the events compared to Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). At 10 km altitude (20 events), both regions experienced more decreases than increases in pressure and temperature before the events and more increases afterward. Notably, Abha experienced more pressure increases both 4 days before (9 vs. 7) and after the events (12 vs. 11) than Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). These findings underscore both similarities and differences in atmospheric responses to FDs between Abha and Tabouk. Both locations exhibited cooling trends before and warming trends after the events, with Tabouk demonstrating a more pronounced warming trend post-event. These results enhance our understanding of the atmospheric dynamics linked to FDs and assist in predicting weather patterns associated with these phenomena.展开更多
Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourtee...Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourteen (14) CORDEX-Africa simulations to capture characteristics of the mean temperature for the present day (1979-2005) and associated extremes over Côte d’Ivoire. For this end, the analysis uses the mean variables of the temperature (i.e., minimum temperature (TMIN), mean temperature (TMEAN) and maximum temperature (TMAX)) as well as associated extremes such as intra-period extreme temperature range (ETR), warm spell duration index (HWFI) and warm days index (TX90P) during January-February-March (JFM), April-May-June (AMJ), July-August-September (JAS) and October-November-December (OND) seasons. The results indicate that mean temperature variables (TMIN, TMEAN and TMAX) are underestimated by CORDEX MME in general, except TMEAN in the centre of Côte d’Ivoire. On the other hand, extreme temperature indices are overestimated over Côte d’Ivoire, except ETR in JAS with an underestimation of about 2˚C and TX90P during JAS in the southern part of the country in JFM, AMJ and OND with an underestimation varying between 1% to 4%. In addition, CORDEX MME and observational datasets (CPC and NCEP) have a significant correlation in simulating temperature variables (TMIN, TMEAN, TMIN), while this correlation is not significant in general for extreme temperature, except ETR and HWFI. Furthermore, extreme temperatures (TX90P and HWFI) are characterized by more important interannual variability in the observations CPC and NCEP for ETR. Moreover, mean temperature variables (TMIN, TMEAN, TMAX) show slight interannual variability with respect to the observations CPC and NCEP, which are characterized by the most variability. Overall, CORDEX MME outperforms the seasonal and spatial variability of the temperature and associated extremes over Côte d’Ivoire, although some biases in representing their magnitudes. Thus, the results of the present study will help take appropriate adaptation and mitigation strategies against heatwaves and extreme temperature advent over Côte d’Ivoire as these climate extremes are projected to increase over the country.展开更多
The influence of pouring temperature and mold temperature on the fluidity and hot tearing behavior of Al-2Li-2Cu-0.5Mg-0.15Sc-0.1Zr-0.1Ti alloys was investigated by experimental investigation and simulation assessment...The influence of pouring temperature and mold temperature on the fluidity and hot tearing behavior of Al-2Li-2Cu-0.5Mg-0.15Sc-0.1Zr-0.1Ti alloys was investigated by experimental investigation and simulation assessment.The results showed that the length of the spiral fluidity sample increases from 302 to 756 mm as the pouring temperature increases from 680 to 740℃,and from 293 to 736 mm as the mold temperature increases from 200 to 400℃.The hot tearing susceptibility(HTS)firstly decreases and then increases with increasing pouring and mold temperatures,which is mainly caused by the oxide inclusion originating from the high activity of Li at excessive pouring temperature.Excessive pouring and mold temperatures easily produce oxide inclusions and holes,leading to a reduction in fluidity and an increase in HTS of the alloy.Combining the experimental and simulation results,the optimized pouring and mold temperatures are~720℃ and~300℃ for the cast Al-Li alloy,respectively.展开更多
This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to ex...This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.展开更多
Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external...Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.展开更多
Three-dimensional ocean subsurface temperature and salinity structures(OST/OSS)in the South China Sea(SCS)play crucial roles in oceanic climate research and disaster mitigation.Traditionally,real-time OST and OSS are ...Three-dimensional ocean subsurface temperature and salinity structures(OST/OSS)in the South China Sea(SCS)play crucial roles in oceanic climate research and disaster mitigation.Traditionally,real-time OST and OSS are mainly obtained through in-situ ocean observations and simulation by ocean circulation models,which are usually challenging and costly.Recently,dynamical,statistical,or machine learning models have been proposed to invert the OST/OSS from sea surface information;however,these models mainly focused on the inversion of monthly OST and OSS.To address this issue,we apply clustering algorithms and employ a stacking strategy to ensemble three models(XGBoost,Random Forest,and LightGBM)to invert the real-time OST/OSS based on satellite-derived data and the Argo dataset.Subsequently,a fusion of temperature and salinity is employed to reconstruct OST and OSS.In the validation dataset,the depth-averaged Correlation(Corr)of the estimated OST(OSS)is 0.919(0.83),and the average Root-Mean-Square Error(RMSE)is0.639°C(0.087 psu),with a depth-averaged coefficient of determination(R~2)of 0.84(0.68).Notably,at the thermocline where the base models exhibit their maximum error,the stacking-based fusion model exhibited significant performance enhancement,with a maximum enhancement in OST and OSS inversion exceeding 10%.We further found that the estimated OST and OSS exhibit good agreement with the HYbrid Coordinate Ocean Model(HYCOM)data and BOA_Argo dataset during the passage of a mesoscale eddy.This study shows that the proposed model can effectively invert the real-time OST and OSS,potentially enhancing the understanding of multi-scale oceanic processes in the SCS.展开更多
Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and prese...Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and preserving paleoenvironmental records.Despite their importance,peatlands outside protected areas face degradation by grazing and fires,threatening their ability to regulate ecosystem processes sensitive to temperature,such as greenhouse gas emissions,water cycling,biological activity,and organic matter decomposition.Since 2016,we have monitored peat temperatures in two contrasting peatlands–one preserved(within a protected area)and one disturbed(outside the protected area)–to understand how anthropogenic disturbances and climate variability impact these fragile ecosystems.Seasonal patterns dominated temperature variation,accounting for 60% of air and 81%–92% of peatland temperature variation.However,average temperatures and amplitudes differed between peatlands and depths.Interannual variability revealed stronger trends in the disturbed peatland,where a 1℃ increase in air temperature caused the trend to increase 0.70℃–0.87℃ on average at depths of 0.85 m–0.92 m.By contrast,the preserved peatland showed smaller increases(0.20℃–0.24℃)at comparable depths(1.06 m–1.24 m),suggesting a greater resilience.Temperature variation in the monitored peatlands was majorly driven by seasonal patterns,as revealed by time series decomposition and sinewave fit.Average temperature and amplitude varied between the two peatlands and among sampling sites,reflecting differences in environmental conditions and measurement depth.Interannual variability also exhibited distinct effects between peatlands and monitoring sites.The time series trend component showed more pronounced fluctuations at shallower depths and in the disturbed peatland.For every 1℃ increase in the trend component of the air temperature,the trend component of the peatland time series increased by 0.70℃ and 0.87℃on average at depths of 0.85 m and 0.92 m,respectively,in the disturbed peatland.In contrast,the preserved peatland exhibited smaller increases of 0.20℃ and 0.24℃ at comparable depths(1.06 m and 1.24 m).These findings highlight the potential for feedback responses between peatland disturbance and climate change,threatening their critical role in regulating carbon and water cycles.Expanding long-term monitoring,strengthening conservation efforts,and raising public awareness are essential to safeguard the ecosystem services provided by tropical mountain peatlands.展开更多
Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors...Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors into three categories:metal-based,inorganic semiconductor,and organic semiconductor materials.Metal-based materials are widely used in medical and industrial applications due to their linearity,stability,and reliability.Inorganic semiconductors provide rapid response times and high miniaturization potential,making them promising for biomedical and environmental monitoring.Organic semiconductors offer high sensitivity and ease of processing,enabling the development of flexible and stretchable sensors.This review analyzes recent studies for each material type,covering design principles,performance characteristics,and applications,highlighting key advantages and challenges regarding miniaturization,sensitivity,response time,and biocompatibility.Furthermore,critical performance parameters of implantable temperature sensors based on different material types are summarized,providing valuable references for future sensor design and optimization.The future development of implantable temperature sensors is discussed,focusing on improving biocompatibility,long-term stability,and multifunctional integration.These advancements are expected to expand the application potential of implantable sensors in telemedicine and dynamic physiological monitoring.展开更多
基金supported by the Xinjiang Tianchi Talent Introduction Plan (51052300585)the Fundamental Research Funds for Autonomous Region Universities (XJEDU2022P002)+1 种基金the Natural science foundation project of Xinjiang Uygur Autonomous Region (2023D01C192,2023D01C33)the Tianshan Innovation Team Program of Xinjiang Uygur Autonomous Region (2023D14001)。
文摘Ceramic materials with intricate structures can be efficiently fabricated using stereolithography(SLA)based 3D printing technology,offering advantages over traditional methods.Sintering temperature has primary effect on properties of ceramics.This study investigated the crucial sintering temperature for 3D printed ceramics to ensure the desired properties.The results indicate that all samples exhibit a consistent layered structure across the experimental sintering temperatures.When the sintering temperature is increased from 1,250℃ to 1,350℃,the grain's morphology changes from spherical to plate-like.Surface morphology analysis reveals a decrease in surface roughness at sintering temperatures above 1,350℃.Mechanical tests show improved flexural strength and stiffness as the sintering temperature rises.Friction and wear experiments demonstrate that as the sintering temperature increases from 1,450℃ to 1,550℃,the wear pattern on ceramic surfaces transitions from deep pits to shallow grooves.The increase in sintering temperature effectively enhances the wear resistance of 3D printed alumina ceramics.This improvement plays a significant role in expanding the application field of these ceramics,prolonging the lifespan of parts,reducing production costs,enhancing performance,and promoting environmental protection.In this study,ceramics achieve the highest strength and best wear resistance when sintered at 1,600℃,resulting in the best overall performance.
基金funded by the National Natural Science Foundation of China(Nos.51672310,51272288,51972344)。
文摘Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.
基金Funded by the National Key Research and Development Plan of China(No.2017YFB0305900)。
文摘WC-Co nanocrystalline nitrogen-containing cemented carbides were prepared by vacuum sintering and low pressure sintering.The sintering processes of Cr_(2)(C,N)doped nano WC-Co powders were studied by using thermogravimetric analysis(TGA)and differential scanning calorimetry(DSC).The effect of sintering temperature on the microstructure and mechanical properties of nanocrystalline cemented carbide was studied by scanning electron microscope(SEM),high resolution transmission electron microscope(HRTEM)and mechanical property test.The results showed that the nano WC grains began to grow in the solid phase sintering stage.A high-performance nano-nitrogen-containing cemented carbide with uniform microstructure and good interfacial bonding can be obtained by increasing the sintering temperature to 1380℃.It has a transverse rupture strength(TRS)of 5057 MPa and a hardness of 1956 HV30.
基金Student Training Program for Innovation and Entrepreneurship of Hangzhou Institute for Advanced Study,UCAS(CXCY20230305)Chinese Academy of Sciences Key Project(ZDRW-CN-2021-3-1-18)。
文摘Ceramic dielectric materials with high dielectric strength and mechanisms of their internal factors affecting dielectric strength are significantly valuable for industrial application,especially for selection of suitable dielectric materials for high-power microwave transmission devices and reliable power transmission.Pure magnesium oxide(MgO),a kind of ceramic dielectric material,possesses great application potential in high-power microwave transmission devices due to its high theoretical dielectric strength,low dielectric constant,and low dielectric loss properties,but its application is limited by high sintering temperature during preparation.This work presented the preparation of a new type of multiphase ceramics based on MgO,which was MgO-1%ZrO_(2)-1%CaCO_(3-x)%MnCO_(3)(MZCM_(x),x=0,0.25,0.50,1.00,1.50,in molar),and their phase structures,morphological features,and dielectric properties were investigated.It was found that inclusion of ZrO_(2) and CaCO_(3) effectively inhibited excessive growth of MgO grains by formation of second phase,while addition of MnCO_(3) promoted the grain boundary diffusion process during the sintering process and reduced activation energy for the grain growth,resulting in a lower ceramic sintering temperature.Excellent performance,including high dielectric strength(Eb=92.3 kV/mm)and quality factor(Q×f=216642 GHz),simultaneously accompanying low dielectric loss(<0.03%),low temperature coefficient of dielectric constant(20.3×10^(–6)℃^(–1),85℃)and resonance frequency(–12.54×10^(–6)℃^(–1)),was achieved in MZCM1.00 ceramics under a relatively low sintering temperature of 1350℃.This work offers an effective solution for selecting dielectric materials for high-power microwave transmission devices.
基金supported by the General Program of the National Natural Science Foundation of China(No.52274326)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202109)the Seventh Batch of Ten Thousand Talents Plan of China(No.ZX20220553).
文摘Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.
基金Funded by Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BE2022028-4)。
文摘We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.
基金supported by the National Science and Technology Major Project,China(No.2019-VI-0004-0118)the National Natural Science Foundation of China(No.51771152)the National Key R&D Program of China(No.2018YFB1106800)。
文摘Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.
基金supported from Science and Technology Development Program of Jilin Province(Nos.20240101128JC,20230402058GH)National Natural Science Foundation of China(No.52130101).
文摘Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or lower.However,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely reported.Herein,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock method.Such a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1) at 2 A g^(−1))at−60℃,outperforming all reported SIB anode materials.Coupled with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1) at−40°C.Based on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.
基金funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan(Grant No.AP19680589).
文摘Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.
文摘This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.
基金partially supported by National Natural Science Foundation of China(52172250)Institute of Process Engineering(IPE)Project for Frontier Basic Research(QYJC-2023-06)。
文摘The use of lithium-sulfur(Li-S)batteries is limited by sulfur redox reactions involving multi-phase transformations,especially at low-temperatures.To address this issue,we report a material(FCNS@NCFs)consisting of nitrogen-doped carbon fibers loaded with a ternary metal sulf-ide((Fe,Co,Ni)_(9)S_(8))for use as the sulfur host in Li-S batteries.This materi-al was prepared using transfer blot filter paper as the carbon precursor,thiourea as the source of nitrogen and sulfur,and FeCl_(3)·6H_(2)O,CoCl_(2)·6H_(2)O and NiCl_(2)·6H_(2)O as the metal ion sources.It was synthesized by an impreg-nation method followed by calcination.The nitrogen doping significantly in-creased the conductivity of the host,and the metal sulfides have excellent catalytic activities.Theoretical calculations,and adsorption and deposition experiments show that active sites on the surface of FCNS@NCFs selectively adsorb polysulfides,facilitate rapid adsorption and conversion,prevent cathode passivation and inhib-it the polysulfide shuttling.The FCNS@NCFs used as the sulfur host has excellent electrochemical properties.Its initial dis-charge capacity is 1639.0 mAh g^(−1) at 0.2 C and room temperature,and it remains a capacity of 1255.1 mAh g^(−1) after 100 cycles.At−20~C,it has an initial discharge capacity of 1578.5 mAh g^(−1) at 0.2 C,with a capacity of 867.5 mAh g^(−1) after 100 cycles.Its excellent performance at both ambient and low temperatures suggests a new way to produce high-performance low-temper-ature Li-S batteries.
文摘The use of solar energy is today widely recognized for the green transition but also for addressing societal challenges associated with the rise in global surface temperature. The design of a photovoltaic solar panel field may require an understanding of how solar radiation oscillates with other variables or factors since multiple interactions occur during its transfer within the atmosphere. In this study, three years of the incoming shortwave radiation (SWin) and air temperature (Tair) data acquired within the “Institut de Mathématiques et de Sciences Physiques” were analyzed using the continuous wavelet transform to extract the inherent variability of these signals. The underlying characteristics meaning the timescale of these variabilities as well as the lead-lag relationship between SWin and Tair were also examined. With the wavelet power spectrum, the highest variability was evidenced at the 2 - 8 band period for the SWin, coinciding almost with that of Tair. This suggests that these two signals are well interconnected at this temporal scale. The results obtained with the phase (∅xy) difference analysis, reveal that SWin leads Tair by ~ 23.5˚ on average when (0 ∅xy∅xyi.e., periods ≤ 32 days), Tair increases with an increasing SWin since the lags between these two signals range between 0.09 - 2.30 days. However, when looking at their interdependence at a larger temporal scale (> 32 days), Tair lags SWin. An increase in SWin might not directly imply an increase in Tair. Overall, these findings give insight into complex relationships across scales between the incoming shortwave radiation and air temperature in a tropical humid region of Bénin.
文摘The objective of this research is to investigate the effects of cosmic ray Forbush Decreases (FDs) exceeding 7% in magnitude, occurring between 1985 and 2016, on upper atmospheric pressure and temperature at Abha and Tabouk. Employing the super epoch analysis method, the study concentrated on altitudes of 5 km and 10 km, uncovering significant variations. Seasonal and synoptic-scale variations were considered and excluded when necessary across eight 9-day periods. Both locations showed considerable fluctuations in pressure and temperature before and after the events. At 5 km altitude (21 events), Abha experienced more pressure increases both before (9 vs. 7) and after (12 vs. 11) the events compared to Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). At 10 km altitude (20 events), both regions experienced more decreases than increases in pressure and temperature before the events and more increases afterward. Notably, Abha experienced more pressure increases both 4 days before (9 vs. 7) and after the events (12 vs. 11) than Tabouk. For temperature, Abha recorded more increases before the events (5 vs. 1), while Tabouk showed more decreases (19 vs. 15). Post-event, Tabouk had more temperature increases (13 vs. 10). These findings underscore both similarities and differences in atmospheric responses to FDs between Abha and Tabouk. Both locations exhibited cooling trends before and warming trends after the events, with Tabouk demonstrating a more pronounced warming trend post-event. These results enhance our understanding of the atmospheric dynamics linked to FDs and assist in predicting weather patterns associated with these phenomena.
文摘Developing reliable adaptation and mitigation strategies to combat climate change is necessary at regional and local scales. The present study analyses the ability of the multi-model ensemble (MME) composed of fourteen (14) CORDEX-Africa simulations to capture characteristics of the mean temperature for the present day (1979-2005) and associated extremes over Côte d’Ivoire. For this end, the analysis uses the mean variables of the temperature (i.e., minimum temperature (TMIN), mean temperature (TMEAN) and maximum temperature (TMAX)) as well as associated extremes such as intra-period extreme temperature range (ETR), warm spell duration index (HWFI) and warm days index (TX90P) during January-February-March (JFM), April-May-June (AMJ), July-August-September (JAS) and October-November-December (OND) seasons. The results indicate that mean temperature variables (TMIN, TMEAN and TMAX) are underestimated by CORDEX MME in general, except TMEAN in the centre of Côte d’Ivoire. On the other hand, extreme temperature indices are overestimated over Côte d’Ivoire, except ETR in JAS with an underestimation of about 2˚C and TX90P during JAS in the southern part of the country in JFM, AMJ and OND with an underestimation varying between 1% to 4%. In addition, CORDEX MME and observational datasets (CPC and NCEP) have a significant correlation in simulating temperature variables (TMIN, TMEAN, TMIN), while this correlation is not significant in general for extreme temperature, except ETR and HWFI. Furthermore, extreme temperatures (TX90P and HWFI) are characterized by more important interannual variability in the observations CPC and NCEP for ETR. Moreover, mean temperature variables (TMIN, TMEAN, TMAX) show slight interannual variability with respect to the observations CPC and NCEP, which are characterized by the most variability. Overall, CORDEX MME outperforms the seasonal and spatial variability of the temperature and associated extremes over Côte d’Ivoire, although some biases in representing their magnitudes. Thus, the results of the present study will help take appropriate adaptation and mitigation strategies against heatwaves and extreme temperature advent over Côte d’Ivoire as these climate extremes are projected to increase over the country.
基金financially supported by the National Natural Science Foundation of China(Nos.51871148,51821001)。
文摘The influence of pouring temperature and mold temperature on the fluidity and hot tearing behavior of Al-2Li-2Cu-0.5Mg-0.15Sc-0.1Zr-0.1Ti alloys was investigated by experimental investigation and simulation assessment.The results showed that the length of the spiral fluidity sample increases from 302 to 756 mm as the pouring temperature increases from 680 to 740℃,and from 293 to 736 mm as the mold temperature increases from 200 to 400℃.The hot tearing susceptibility(HTS)firstly decreases and then increases with increasing pouring and mold temperatures,which is mainly caused by the oxide inclusion originating from the high activity of Li at excessive pouring temperature.Excessive pouring and mold temperatures easily produce oxide inclusions and holes,leading to a reduction in fluidity and an increase in HTS of the alloy.Combining the experimental and simulation results,the optimized pouring and mold temperatures are~720℃ and~300℃ for the cast Al-Li alloy,respectively.
文摘This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.
基金supported by China Agriculture Research System of MOF and MARA(Grant No.CARS23-B10)The Major Science and Technology Projects in Hainan Province(Grant No.ZDKJ2021005)+1 种基金Key R&D projects in Shandong Province(Grant No.LJNY202106)Central Public-interest Scientific Institution Basal Research Fund(Grant No.IVF-BRF2023006)。
文摘Grafting is an effective technique for increasing the resistance of vegetables to biotic and abiotic stresses.It has been widely applied to produce solanaceous and melon vegetables.Temperature is an important external factor affecting graft formation.However,the molecular mechanism by which external ambient temperature affects tomato graft formation remains unclear.In this study,we demonstrated that elevating ambient temperature during grafting to 35℃ for more than 24 h after grafting accelerated vascular reconnection.We generated self-or heterografted combinations between phyB1B2 and pif4 loss-of-function mutant and wild-type plants,and were mutants unresponsive to graft formation at elevated ambient temperature.In addition,elevated ambient temperature induced SlPIF4 expression during grafting.SlPIF4 directly binds the promoters of auxin biosynthesis genes SlYUCCAs and activates their expression.Further investigation revealed auxin accumulation in the graft junction under elevated ambient temperature.The results illuminate the mechanism by which the PHYB-PIF4-auxin module promotes tomato graft formation in response to elevated ambient temperature.
基金jointly supported by the National Key Research and Development Program of China(2022YFC3104304)the National Natural Science Foundation of China(Grant No.41876011)+1 种基金the 2022 Research Program of Sanya Yazhou Bay Science and Technology City(SKJC-2022-01-001)the Hainan Province Science and Technology Special Fund(ZDYF2021SHFZ265)。
文摘Three-dimensional ocean subsurface temperature and salinity structures(OST/OSS)in the South China Sea(SCS)play crucial roles in oceanic climate research and disaster mitigation.Traditionally,real-time OST and OSS are mainly obtained through in-situ ocean observations and simulation by ocean circulation models,which are usually challenging and costly.Recently,dynamical,statistical,or machine learning models have been proposed to invert the OST/OSS from sea surface information;however,these models mainly focused on the inversion of monthly OST and OSS.To address this issue,we apply clustering algorithms and employ a stacking strategy to ensemble three models(XGBoost,Random Forest,and LightGBM)to invert the real-time OST/OSS based on satellite-derived data and the Argo dataset.Subsequently,a fusion of temperature and salinity is employed to reconstruct OST and OSS.In the validation dataset,the depth-averaged Correlation(Corr)of the estimated OST(OSS)is 0.919(0.83),and the average Root-Mean-Square Error(RMSE)is0.639°C(0.087 psu),with a depth-averaged coefficient of determination(R~2)of 0.84(0.68).Notably,at the thermocline where the base models exhibit their maximum error,the stacking-based fusion model exhibited significant performance enhancement,with a maximum enhancement in OST and OSS inversion exceeding 10%.We further found that the estimated OST and OSS exhibit good agreement with the HYbrid Coordinate Ocean Model(HYCOM)data and BOA_Argo dataset during the passage of a mesoscale eddy.This study shows that the proposed model can effectively invert the real-time OST and OSS,potentially enhancing the understanding of multi-scale oceanic processes in the SCS.
基金This study was financed in part by the Coordenacao de Aperfeiçoamento de Pessoal de Nivel Superior-Brasil(CAPES)-Finance Code 001the Brazilian Conselho Nacional de Pesquisa-CNPq(study and research grants and research funding-Process 303666/2018-8,408162/2018-0,441335/2020-9,302969/2021-7,and 50484/2022-4)Fundacao de ApoioaPesquisa do Estado de Minas Gerais-FAPEMIG(study grants and research funding-Process CRA/APQ 0100-18,APQ-03364-21 and CAG/PPM 00568-16).
文摘Tropical mountain peatlands in Brazil’s Southern Espinhaço Range are vital ecosystems,acting as carbon reservoirs,hydrological buffers,and biodiversity hotspots while sustaining traditional livelihoods and preserving paleoenvironmental records.Despite their importance,peatlands outside protected areas face degradation by grazing and fires,threatening their ability to regulate ecosystem processes sensitive to temperature,such as greenhouse gas emissions,water cycling,biological activity,and organic matter decomposition.Since 2016,we have monitored peat temperatures in two contrasting peatlands–one preserved(within a protected area)and one disturbed(outside the protected area)–to understand how anthropogenic disturbances and climate variability impact these fragile ecosystems.Seasonal patterns dominated temperature variation,accounting for 60% of air and 81%–92% of peatland temperature variation.However,average temperatures and amplitudes differed between peatlands and depths.Interannual variability revealed stronger trends in the disturbed peatland,where a 1℃ increase in air temperature caused the trend to increase 0.70℃–0.87℃ on average at depths of 0.85 m–0.92 m.By contrast,the preserved peatland showed smaller increases(0.20℃–0.24℃)at comparable depths(1.06 m–1.24 m),suggesting a greater resilience.Temperature variation in the monitored peatlands was majorly driven by seasonal patterns,as revealed by time series decomposition and sinewave fit.Average temperature and amplitude varied between the two peatlands and among sampling sites,reflecting differences in environmental conditions and measurement depth.Interannual variability also exhibited distinct effects between peatlands and monitoring sites.The time series trend component showed more pronounced fluctuations at shallower depths and in the disturbed peatland.For every 1℃ increase in the trend component of the air temperature,the trend component of the peatland time series increased by 0.70℃ and 0.87℃on average at depths of 0.85 m and 0.92 m,respectively,in the disturbed peatland.In contrast,the preserved peatland exhibited smaller increases of 0.20℃ and 0.24℃ at comparable depths(1.06 m and 1.24 m).These findings highlight the potential for feedback responses between peatland disturbance and climate change,threatening their critical role in regulating carbon and water cycles.Expanding long-term monitoring,strengthening conservation efforts,and raising public awareness are essential to safeguard the ecosystem services provided by tropical mountain peatlands.
基金supported by the National Natural Science Foundation of China(NSFC)(62422501)Beijing Nova Program(20230484254,20240484742)Hebei Natural Science Foundation(F2024105039).
文摘Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors into three categories:metal-based,inorganic semiconductor,and organic semiconductor materials.Metal-based materials are widely used in medical and industrial applications due to their linearity,stability,and reliability.Inorganic semiconductors provide rapid response times and high miniaturization potential,making them promising for biomedical and environmental monitoring.Organic semiconductors offer high sensitivity and ease of processing,enabling the development of flexible and stretchable sensors.This review analyzes recent studies for each material type,covering design principles,performance characteristics,and applications,highlighting key advantages and challenges regarding miniaturization,sensitivity,response time,and biocompatibility.Furthermore,critical performance parameters of implantable temperature sensors based on different material types are summarized,providing valuable references for future sensor design and optimization.The future development of implantable temperature sensors is discussed,focusing on improving biocompatibility,long-term stability,and multifunctional integration.These advancements are expected to expand the application potential of implantable sensors in telemedicine and dynamic physiological monitoring.
