Having been engaged in TCM for 50 years, Prof. Xiao Shaoqin has got rich experience in acupuncture. The author has pursued advanced studies for 3 years under his guidance, and has learned a lot from him. The following...Having been engaged in TCM for 50 years, Prof. Xiao Shaoqin has got rich experience in acupuncture. The author has pursued advanced studies for 3 years under his guidance, and has learned a lot from him. The following is a report of Prof. Xiao Shaoqin's experience for treating 3 typical eases.展开更多
As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands...As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.展开更多
The bioinert nature of polyether ether ketone(PEEK)material limits the widespread clinical application of PEEK implants.Although the porous structure is considered to improve osseointegration of PEEK implants,it is ha...The bioinert nature of polyether ether ketone(PEEK)material limits the widespread clinical application of PEEK implants.Although the porous structure is considered to improve osseointegration of PEEK implants,it is hardly used due to its mechanical properties.This study investigated the combined influence of the porous structure and in vivo mechanical stimulation on implantation safety and bone growth based on finite element analysis of the biomechanical behavior of the implantation system.The combined control of pore size and screw preloads allows the porous PEEK implant to achieve good osseointegration while maintaining a relatively high safety level.A pore size of 600μm and a preload of 0.05 N·m are the optimal combination for the long-term stability of the implant,with which the safety factor of the implant is>2,and the predicted percentage of effective bone growth area of the bone-implant interface reaches 97%.For further clinical application,PEEK implants were fabricated with fused filament fabrication(FFF)three-dimensional(3D)printing,and clinical outcomes demonstrated better bone repair efficacy and long-term stability of porous PEEK implants compared to solid PEEK implants.Moreover,good osteointegration performance of 3D-printed porous PEEK implants was observed,with an average bone volume fraction>40%three months after implantation.In conclusion,3D-printed porous PEEK implants have great potential for clinical application,with validated implantation safety and good osseointegration.展开更多
In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.S...In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.Such defects are identified as crucial contributors to the failure and instability of the surrounding rock,subsequently impacting the engineering stability.The study aimed to investigate the impact of fracture geometry and confining pressure on the deformation,failure characteristics,and strength of specimens using sand powder 3D printing technology and conventional triaxial compression tests.The results indicate that the number of fractures present considerably influences the peak strength,axial peak strain and elastic modulus of the specimens.Confining pressure is an important factor affecting the failure pattern of the specimen,under which the specimen is more prone to shear failure,but the initiation,expansion and penetration processes of secondary cracks in different fracture specimens are different.This study confirmed the feasibility of using sand powder 3D printing specimens as soft rock analogs for triaxial compression research.The insights from this research are deemed essential for a deeper understanding of the mechanical behavior of fractured surrounding rocks when under triaxial stress state.展开更多
A process using soda roasting-alkaline leaching-acid leaching to remove selenium, tellurium and copper sequentially from the copper anode slime with high content of Ni was tested. The mechanism of this process was out...A process using soda roasting-alkaline leaching-acid leaching to remove selenium, tellurium and copper sequentially from the copper anode slime with high content of Ni was tested. The mechanism of this process was outlined based on thermodynamic analysis and the change in the XRD patterns of different intermediate products. During soda roasting, copper which occurs as Cu4SeTe in the slime was oxidized to CuO and Cu3TeO6, while selenium and tellurium were oxidized to Ag2SeO4 and Cu3TeO6, respectively. Ag2SeO4 in the calcine is easily leached in the subsequent alkaline leaching, but CuTeO3 resulted from the decomposition of CCu3TeO6 remains inactive in this process through which selenium is leached out in preference to tellurium. The CuTeO3 and Cu O in the alkaline leaching residue can be leached in the following sulfuric acid leaching process. More than 97% of selenium was leached with little tellurium leached under the optimal condition. Then, more than 96% of copper and almost all the tellurium were leached out in the following acid leaching process.展开更多
A new type of vascular stent is designed for treating stenotic vessels. Aiming at overcoming the shortcomings of existing equipment and technology for preparing a bioabsorbable vascular stent （BVS）, a new method whi...A new type of vascular stent is designed for treating stenotic vessels. Aiming at overcoming the shortcomings of existing equipment and technology for preparing a bioabsorbable vascular stent （BVS）, a new method which combines 3D bio-printing and electrospinning to prepare the composite bioabsorbable vascular stent （CBVS） is proposed. The inner layer of the CBVS can be obtained through 3D bio- printing using poly-p-dioxanone （PPDO）. The thin nanofiber film that serves as the outer layer can be built through electrospinning using mixtures of chitosan-PVA （poly （vinyl alcohol））. Tests of mechanical properties show that the stent prepared through 3D bio-printing combined with electrospinning is better than that prepared through 3D bio- printing alone. Cells cultivated on the CBVS adhere and proliferate better due to the natural, biological chitosan in the outer layer. The proposed complex process and method can provide a good basis for preparing a controllable drug-carrying vascular stent. Overall, the CBVS can be a good candidate for treating stenotic vessels.展开更多
This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process,...This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process, various process param- eters including the rotating speeds of threshing drums of threshing machioe, draught fans and fling drums were scientifically and rationally set according to the actual quality of the raw material. According to the characteristic that strips with close in- herent quality have basically the same specific gravity and leaf thickness, the strips from each discharge hole were accurately evaluated, and classified, followed by redrying and packaging. The results showed that the threshing and separating pro- cedure could improve the separating effect and precision according to tobacco qual- ity, so as to satisfy the separation and classification requirements for tobacco.展开更多
[Objective] This study aimed to construct Myostatin （MSTN） gene targeting vector of mouse. [Method] Total RNA was extracted from hindlimb muscle tissues of mouse to synthesize cDNA as the template to clone the codin...[Objective] This study aimed to construct Myostatin （MSTN） gene targeting vector of mouse. [Method] Total RNA was extracted from hindlimb muscle tissues of mouse to synthesize cDNA as the template to clone the coding region of MSTN. The CDS of MSTN gene including 3 kb 5’ homologous arm and 1.4 kb 3’ homologous arm were inserted into vector pBluescript_SK ＋ to construct the targeting vector pLoxP-5N3T-M. The neo and HSV-tk gene were cloned into vector pBluescript_SK＋ as positive and negative selective gene. [Result] Restriction enzyme digestion and sequencing results showed that mouse MSTN gene was cloned into the targeting vector pLoxP-5N3T-M. [Conclusion] The mouse MSTN gene targeting vector pLoxP5N3T-M was successfully constructed.展开更多
With more and more attention paid to comprehensive utilization of agricul-tural biomass resources, environment pol ution caused by large-scale burning of sug-arcane leaves can be effectively avoided, and it is urgent ...With more and more attention paid to comprehensive utilization of agricul-tural biomass resources, environment pol ution caused by large-scale burning of sug-arcane leaves can be effectively avoided, and it is urgent to resolve storage issue of sugarcane leaf. Through referring to the relevant domestic baler models and re-search findings, preliminary design and analysis were conducted on key components compression mechanism of smal sugarcane leaf baler, involving the open compres-sion principle for sugarcane leaf square baler, determination of the crank slider-type compression mechanism and the main parameters such as crank length, compres-sion frequency, feed rate and feed inlet length. Based on SolidWorks software, this paper established the 3-dimensional models of slider-crank type compression mech-anism, and imported it into ADMAMS software for the motion simulation analysis, to establish the foundation for the design and manufacture of subsequent smal sugar-cane leaf square baler prototype.展开更多
[Objective] The aim was to calculate the safe straw volume using Frank- Kamenetskii Model to provide method for fire protection in forage farm. [Method] Frank-Kamenetskii Model was used to measure Tacr and improved by...[Objective] The aim was to calculate the safe straw volume using Frank- Kamenetskii Model to provide method for fire protection in forage farm. [Method] Frank-Kamenetskii Model was used to measure Tacr and improved by marginal tem- perature which was adjustable. In addition, effects of water content and density of baled straws on Tc were explored using the improved model. [Result] Size of straw bales was the key factor determining whether spontaneous combustion would occur. For baled straws with water at 15.27% and density at 285 kg/m3, Tc was 85-88 ~C and safe diameter of baled straws maximized 8.2 m. In addition, straws should be stacked from south to north （or north to south） to avoid sunshine and certain space should be kept between straw bales for heat dissipation. [Conclusion] The research is of significance for safe management of forage farm.展开更多
文摘Having been engaged in TCM for 50 years, Prof. Xiao Shaoqin has got rich experience in acupuncture. The author has pursued advanced studies for 3 years under his guidance, and has learned a lot from him. The following is a report of Prof. Xiao Shaoqin's experience for treating 3 typical eases.
基金supported by the National Natural Science Foundation of China(Nos.52325504,52235007,and T2121004).
文摘As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.
基金supported by the National Key R&D Program of China(No.2023YFB4603500)the Program for Innovation Team of Shaanxi Province(No.2023-CX-TD-17)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Shaanxi Province Qinchuangyuan“Scientist+Engineer”Team Construction Project(No.2022KXJ-106).
文摘The bioinert nature of polyether ether ketone(PEEK)material limits the widespread clinical application of PEEK implants.Although the porous structure is considered to improve osseointegration of PEEK implants,it is hardly used due to its mechanical properties.This study investigated the combined influence of the porous structure and in vivo mechanical stimulation on implantation safety and bone growth based on finite element analysis of the biomechanical behavior of the implantation system.The combined control of pore size and screw preloads allows the porous PEEK implant to achieve good osseointegration while maintaining a relatively high safety level.A pore size of 600μm and a preload of 0.05 N·m are the optimal combination for the long-term stability of the implant,with which the safety factor of the implant is>2,and the predicted percentage of effective bone growth area of the bone-implant interface reaches 97%.For further clinical application,PEEK implants were fabricated with fused filament fabrication(FFF)three-dimensional(3D)printing,and clinical outcomes demonstrated better bone repair efficacy and long-term stability of porous PEEK implants compared to solid PEEK implants.Moreover,good osteointegration performance of 3D-printed porous PEEK implants was observed,with an average bone volume fraction>40%three months after implantation.In conclusion,3D-printed porous PEEK implants have great potential for clinical application,with validated implantation safety and good osseointegration.
基金Project(2021YFC2900600)supported by the Young Scientist Project of National Key Research and Development Program of ChinaProject(52074166)supported by the National Natural Science Foundation of China+1 种基金Projects(ZR2021YQ38,ZR2020QE121)supported by the Natural Science Foundation of Shandong Province,ChinaProject(2022KJ101)supported by the Science and Technology Support Plan for Youth Innovation of Colleges and Universities in Shandong Province,China。
文摘In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.Such defects are identified as crucial contributors to the failure and instability of the surrounding rock,subsequently impacting the engineering stability.The study aimed to investigate the impact of fracture geometry and confining pressure on the deformation,failure characteristics,and strength of specimens using sand powder 3D printing technology and conventional triaxial compression tests.The results indicate that the number of fractures present considerably influences the peak strength,axial peak strain and elastic modulus of the specimens.Confining pressure is an important factor affecting the failure pattern of the specimen,under which the specimen is more prone to shear failure,but the initiation,expansion and penetration processes of secondary cracks in different fracture specimens are different.This study confirmed the feasibility of using sand powder 3D printing specimens as soft rock analogs for triaxial compression research.The insights from this research are deemed essential for a deeper understanding of the mechanical behavior of fractured surrounding rocks when under triaxial stress state.
基金Project(2012BAE06B05)supported by the National Science and Technology Support Plan of China
文摘A process using soda roasting-alkaline leaching-acid leaching to remove selenium, tellurium and copper sequentially from the copper anode slime with high content of Ni was tested. The mechanism of this process was outlined based on thermodynamic analysis and the change in the XRD patterns of different intermediate products. During soda roasting, copper which occurs as Cu4SeTe in the slime was oxidized to CuO and Cu3TeO6, while selenium and tellurium were oxidized to Ag2SeO4 and Cu3TeO6, respectively. Ag2SeO4 in the calcine is easily leached in the subsequent alkaline leaching, but CuTeO3 resulted from the decomposition of CCu3TeO6 remains inactive in this process through which selenium is leached out in preference to tellurium. The CuTeO3 and Cu O in the alkaline leaching residue can be leached in the following sulfuric acid leaching process. More than 97% of selenium was leached with little tellurium leached under the optimal condition. Then, more than 96% of copper and almost all the tellurium were leached out in the following acid leaching process.
基金The National Natural Science Foundation of China(No.51475281,51375292)the National Natural Science Foundation for Young Scholar of China(No.51105239)
文摘A new type of vascular stent is designed for treating stenotic vessels. Aiming at overcoming the shortcomings of existing equipment and technology for preparing a bioabsorbable vascular stent （BVS）, a new method which combines 3D bio-printing and electrospinning to prepare the composite bioabsorbable vascular stent （CBVS） is proposed. The inner layer of the CBVS can be obtained through 3D bio- printing using poly-p-dioxanone （PPDO）. The thin nanofiber film that serves as the outer layer can be built through electrospinning using mixtures of chitosan-PVA （poly （vinyl alcohol））. Tests of mechanical properties show that the stent prepared through 3D bio-printing combined with electrospinning is better than that prepared through 3D bio- printing alone. Cells cultivated on the CBVS adhere and proliferate better due to the natural, biological chitosan in the outer layer. The proposed complex process and method can provide a good basis for preparing a controllable drug-carrying vascular stent. Overall, the CBVS can be a good candidate for treating stenotic vessels.
文摘This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process, various process param- eters including the rotating speeds of threshing drums of threshing machioe, draught fans and fling drums were scientifically and rationally set according to the actual quality of the raw material. According to the characteristic that strips with close in- herent quality have basically the same specific gravity and leaf thickness, the strips from each discharge hole were accurately evaluated, and classified, followed by redrying and packaging. The results showed that the threshing and separating pro- cedure could improve the separating effect and precision according to tobacco qual- ity, so as to satisfy the separation and classification requirements for tobacco.
基金Supported by Project from Science and Technology Department of Guizhou Province ([2009]2173)~~
文摘[Objective] This study aimed to construct Myostatin （MSTN） gene targeting vector of mouse. [Method] Total RNA was extracted from hindlimb muscle tissues of mouse to synthesize cDNA as the template to clone the coding region of MSTN. The CDS of MSTN gene including 3 kb 5’ homologous arm and 1.4 kb 3’ homologous arm were inserted into vector pBluescript_SK ＋ to construct the targeting vector pLoxP-5N3T-M. The neo and HSV-tk gene were cloned into vector pBluescript_SK＋ as positive and negative selective gene. [Result] Restriction enzyme digestion and sequencing results showed that mouse MSTN gene was cloned into the targeting vector pLoxP-5N3T-M. [Conclusion] The mouse MSTN gene targeting vector pLoxP5N3T-M was successfully constructed.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest(201203072)~~
文摘With more and more attention paid to comprehensive utilization of agricul-tural biomass resources, environment pol ution caused by large-scale burning of sug-arcane leaves can be effectively avoided, and it is urgent to resolve storage issue of sugarcane leaf. Through referring to the relevant domestic baler models and re-search findings, preliminary design and analysis were conducted on key components compression mechanism of smal sugarcane leaf baler, involving the open compres-sion principle for sugarcane leaf square baler, determination of the crank slider-type compression mechanism and the main parameters such as crank length, compres-sion frequency, feed rate and feed inlet length. Based on SolidWorks software, this paper established the 3-dimensional models of slider-crank type compression mech-anism, and imported it into ADMAMS software for the motion simulation analysis, to establish the foundation for the design and manufacture of subsequent smal sugar-cane leaf square baler prototype.
基金Supported by Fund for Philosophy&Social Sciences of Jiangsu Provincial Department of Education(2011SJD820013)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)Scientific Research Fund of Jiangsu Police Institute(11Y03)~~
文摘[Objective] The aim was to calculate the safe straw volume using Frank- Kamenetskii Model to provide method for fire protection in forage farm. [Method] Frank-Kamenetskii Model was used to measure Tacr and improved by marginal tem- perature which was adjustable. In addition, effects of water content and density of baled straws on Tc were explored using the improved model. [Result] Size of straw bales was the key factor determining whether spontaneous combustion would occur. For baled straws with water at 15.27% and density at 285 kg/m3, Tc was 85-88 ~C and safe diameter of baled straws maximized 8.2 m. In addition, straws should be stacked from south to north （or north to south） to avoid sunshine and certain space should be kept between straw bales for heat dissipation. [Conclusion] The research is of significance for safe management of forage farm.
