Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the tougheni...Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the toughening effect of fibers is analyzed,their influence on the slurry conveying performance should also be considered.Additionally,cement affects the interactions among the hydration products,fibers,and aggregates.In this study,the effects of cement content(8wt%,9wt%,and 10wt%)and PP fiber length(6,9,and 12 mm)and dosage(0.05wt%,0.1wt%,0.15wt%,0.2wt%,and 0.25wt%)on fluidity and mechanical properties of the fibertoughened CASB(FCASB)were analyzed.The results indicated that with increases in the three aforementioned factors,the slump flow decreased,while the rheological parameters increased.Uniaxial compressive strength(UCS)increased with the increase of cement content and fiber length,and with an increase in fiber dosage,it first increased and then decreased.The strain increased with the increase of fiber dosage and length.The effect of PP fibers became more pronounced with the increase of cement content.Digital image correlation(DIC)test results showed that the addition of fibers can restrain the peeling of blocks and the expansion of fissure,and reduce the stress concentration of the FCASB.Scanning electron microscopy(SEM)test indicated that the functional mechanisms of fibers mainly involved the interactions of fibers with the hydration products and matrix and the spatial distribution of fibers.On the basis of single-factor analysis,the response surface method(RSM)was used to analyze the effects of the three aforementioned factors and their interaction terms on the UCS.The influence surface of the two-factor interaction terms and the three-dimensional scatter plot of the three-factor coupling were established.In conclusion,the response law of the FCASB properties under the effects of cement and PP fibers were obtained,which provides theoretical and engineering guidance for FCASB filling.展开更多
This paper presented a novel bond-slip model to better reveal the mechanical behavior of the bolt-grout interface for fully-grouted rockbolts under tensile loads by considering the non-linear response in the softening...This paper presented a novel bond-slip model to better reveal the mechanical behavior of the bolt-grout interface for fully-grouted rockbolts under tensile loads by considering the non-linear response in the softening stage.The exponential decay function is adopted for describing the non-linear response in the softening stage.Based on the improved bond-slip model,the corresponding analytical solutions for the interfacial shear stress and the axial force of the bolt under different loading stages are solved.Then,the validity of this proposed model was verified by comparing with the experimental results.The results show that compared with the linear softening model,the proposed model is more suitable for predicting the mechanical performance of fully-grouted rockbolts.Finally,a series of parametric studies are conducted to explore the effect of model parameters on the mechanical properties of fully-grouted rockbolts.The results indicate that compared with the anchor length,the bolt diameter and the bond strength of the bolt-grout interface have a significance influence on the ultimate load of bolt,especially for the elastic and softening stage.Moreover,it can be found that using the linear softening model maybe overestimates the supporting performance of grouted bolt,resulting in an unsafe design for bolt.展开更多
In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under ...In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under delayed ignition blasting loads.The following experimental results are obtained.(1)In directional-fracture-controlled blasting,the dynamic stress intensity factors(DSIFs)and the propagation paths of the blast-induced cracks are obviously influenced by the delayed ignition.(2) The circular hole situated between the two boreholes poses a strong guiding effect on the coelesence of the cracks,causing them to propagate towards each other when cracks are reaching the circular hole area.(3)Blast-induced cracks are not initiated preferentially because of the superimposed effect from the explosive stress waves on the cracking area.(4) By using the scanning electron microscopy(SEM)method,it is verified that the roughness of crack surfaces changes along the crack propagation paths.展开更多
基金financially supported by the National Natural Science Foundation of China(No.52174095)the Top Innovative Talents Cultivation Fund for Doctoral Postgraduates(No.BBJ2023054).
文摘Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS control.Cemented AS backfill(CASB)exhibits brittle fracture.Polypropylene(PP)fibers are good toughening materials.When the toughening effect of fibers is analyzed,their influence on the slurry conveying performance should also be considered.Additionally,cement affects the interactions among the hydration products,fibers,and aggregates.In this study,the effects of cement content(8wt%,9wt%,and 10wt%)and PP fiber length(6,9,and 12 mm)and dosage(0.05wt%,0.1wt%,0.15wt%,0.2wt%,and 0.25wt%)on fluidity and mechanical properties of the fibertoughened CASB(FCASB)were analyzed.The results indicated that with increases in the three aforementioned factors,the slump flow decreased,while the rheological parameters increased.Uniaxial compressive strength(UCS)increased with the increase of cement content and fiber length,and with an increase in fiber dosage,it first increased and then decreased.The strain increased with the increase of fiber dosage and length.The effect of PP fibers became more pronounced with the increase of cement content.Digital image correlation(DIC)test results showed that the addition of fibers can restrain the peeling of blocks and the expansion of fissure,and reduce the stress concentration of the FCASB.Scanning electron microscopy(SEM)test indicated that the functional mechanisms of fibers mainly involved the interactions of fibers with the hydration products and matrix and the spatial distribution of fibers.On the basis of single-factor analysis,the response surface method(RSM)was used to analyze the effects of the three aforementioned factors and their interaction terms on the UCS.The influence surface of the two-factor interaction terms and the three-dimensional scatter plot of the three-factor coupling were established.In conclusion,the response law of the FCASB properties under the effects of cement and PP fibers were obtained,which provides theoretical and engineering guidance for FCASB filling.
基金This work was financially supported by the National Key Research and Development Program of China(No.2021YFC2902103)Meanwhile,the authors would also like to acknowledge the support provided by Beijing Gold-Bridge Funds and Beijing Excellent Young Engineer Innovation Studio.
文摘This paper presented a novel bond-slip model to better reveal the mechanical behavior of the bolt-grout interface for fully-grouted rockbolts under tensile loads by considering the non-linear response in the softening stage.The exponential decay function is adopted for describing the non-linear response in the softening stage.Based on the improved bond-slip model,the corresponding analytical solutions for the interfacial shear stress and the axial force of the bolt under different loading stages are solved.Then,the validity of this proposed model was verified by comparing with the experimental results.The results show that compared with the linear softening model,the proposed model is more suitable for predicting the mechanical performance of fully-grouted rockbolts.Finally,a series of parametric studies are conducted to explore the effect of model parameters on the mechanical properties of fully-grouted rockbolts.The results indicate that compared with the anchor length,the bolt diameter and the bond strength of the bolt-grout interface have a significance influence on the ultimate load of bolt,especially for the elastic and softening stage.Moreover,it can be found that using the linear softening model maybe overestimates the supporting performance of grouted bolt,resulting in an unsafe design for bolt.
基金Supported by the Opening Fund of the State Key Laboratory of Explosion Science and Technology of Beijing Institute of Technology(KFJJ17-01M)
文摘In this paper,dynamic caustic method is applied to analyze the blast-induced crack propagation and distribution of the dynamic stress field around an empty circular hole in polymethyl methacrylate(PMMA)material under delayed ignition blasting loads.The following experimental results are obtained.(1)In directional-fracture-controlled blasting,the dynamic stress intensity factors(DSIFs)and the propagation paths of the blast-induced cracks are obviously influenced by the delayed ignition.(2) The circular hole situated between the two boreholes poses a strong guiding effect on the coelesence of the cracks,causing them to propagate towards each other when cracks are reaching the circular hole area.(3)Blast-induced cracks are not initiated preferentially because of the superimposed effect from the explosive stress waves on the cracking area.(4) By using the scanning electron microscopy(SEM)method,it is verified that the roughness of crack surfaces changes along the crack propagation paths.
