期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Cooperative composites anchored with single atom Pb and carbon confined PbO nanoparticles for superior lead-carbon batteries
1
作者 Puqiang He Yi Yang +4 位作者 Hui Huang Jing Huang Hongbiao Wang Yapeng He zhongcheng guo 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第10期486-497,I0010,共13页
The mitigation of sulphation and parasitic hydrogen evolution is considered as prominent research emphasis for the development of lead-carbon batteries(LCBs)in large-scale energy storage applications.Here,cooperative ... The mitigation of sulphation and parasitic hydrogen evolution is considered as prominent research emphasis for the development of lead-carbon batteries(LCBs)in large-scale energy storage applications.Here,cooperative Pb-C composites consisting of single atom Pb and carbon-encapsulated PbO nanoparticles were prepared by freeze-drying technique and pyrolytic reduction to address above obstacles.The innovative use of Pb^(2+)to cross-link sodium alginate enabled a uniform distribution of Pb in the composites,generating Pb-C-PbO three-phase heterostructure.Experimental analysis and theoretical calculations revealed the synergistic interactions between single-atom Pb and PbO nanoparticles in suppressing parasitic hydrogen evolution and promoting the adsorption of Pb atoms.The presence of monatomic Pb and PbO enhanced the affinity of the composites for the negative active materials and facilitated the transformation of the active materials from bulk into spherical shapes to enhance the specific surface area,thereby counteracting sulphation.Through the coordinated integration of various functionalities offered by Pb@C-x,the cycle life of the battery at HRPSoC reaches 7025 cycles,which is two times for LCB with pure carbon materials.Additionally,the discharge capacity increased from 3.52 to 3.79 Ah.This study provides substantial insights into the construction of Pb-C composites for LCBs to inhibit negative sulphation and hydrogen evolution. 展开更多
关键词 Lead-carbon battery Negative sulphation Hydrogen evolution SINGLE-ATOM Lead carbon composites
在线阅读 下载PDF
Effects of Zr content on electrochemical performance of Ti/Sn-Ru-Co-ZrO_(x)electrodes 被引量:1
2
作者 Linhui Chang Sheng Chen +5 位作者 Xionghui Xie Buming Chen Haihong Qiao Hui Huang zhongcheng guo Ruidong Xu 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2022年第12期2181-2188,共8页
The low cell voltage during electrolytic Mn from the MnCl_(2) system can effectively reduce the power consumption.In this work,the Ti/Sn−Ru−Co−Zr modified anodes were obtained by using thermal decomposition oxidation.... The low cell voltage during electrolytic Mn from the MnCl_(2) system can effectively reduce the power consumption.In this work,the Ti/Sn−Ru−Co−Zr modified anodes were obtained by using thermal decomposition oxidation.The physical parameters of coatings were observed by SEM(scanning electron microscope).Based on the electrochemical performance and SEM/XRD(X-ray diffraction)of the coatings,the influence of Zr on electrode performance was studied and analyzed.When the mole ratio of Sn−Ru−Co−Zr is 6:1:0.8:0.3,the cracks on the surface of coatings were the smallest,and the compactness was the best due to the excellent filling effect of ZrO_(2)nanoparticles.Moreover,the electrode prepared under this condition had the lowest mass transfer resistance and high chloride evolution activity in the 1mol%NH_(4)Cl and 1.5mol%HCl system.The service life of 3102 h was achieved according to the empirical formula of accelerated-life-test of the new type anode. 展开更多
关键词 Ti/Sn−Ru−Co−Zr anode electrochemical Mn electrowinning manganese chloride system service life
在线阅读 下载PDF
Electrochemical Properties and Microstructure of Al/Pb–Ag and Al/Pb–Ag–Co Anodes for Zinc Electrowinning 被引量:5
3
作者 Yongchun Zhang Buming Chen zhongcheng guo 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2014年第2期331-337,共7页
The Al/Pb-0.8%Ag and Al/Pb-0.75%Ag-0.03%Co (in mass fraction) anodes used in zinc electrowinning are prepared through the electrodeposition of lead methanesulfonate electrolyte onto an aluminum matrix. The results o... The Al/Pb-0.8%Ag and Al/Pb-0.75%Ag-0.03%Co (in mass fraction) anodes used in zinc electrowinning are prepared through the electrodeposition of lead methanesulfonate electrolyte onto an aluminum matrix. The results of anode polarization curves, Tafel curves, and EIS characterizations indicated that the Al/Pb-0.75%Ag-0.03%Co anode has higher electrocatalytic activity and corrosion resistance than the Al/Pb-0.8%Ag anode. SEM observations on the fruit surfaces demonstrated the crystals on the Al/Pb-0.8%Ag anode are larger than on the Al/Pb-0.75%Ag-0.03%Co anode. After 24 h of anodic polarization, SEM observations and XRD analysis showed that the MnO2-PbO2 layer on the Al/Pb-0.75%Ag- 0.03%Co anode surface is characterized by dendritic crystals, and the PbSO4-PbO2 layer under the MnO2-PbO2 layer is characterized by uniform and chaotic orientation tetragonal symmetry crystallites of PbSO4. However, the MnO2-PbO2 layer on the Al/Pb-0.8%Ag anode surface is characterized by granular crystals, and the PbSO4-PbO2 layer under the MnO2 PbO2 layer is characterized by well-organized orientation crystallites of PbSO4, which are concentrated in certain zones. 展开更多
关键词 Zinc electrowinning Corrosion resistance Eiectrocatalytic activity
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部