This review details the state of the art in research on top coal drawing mechanisms in Longwall top coal caving(LTCC)by examining the relevant literature over the last two decades.It startswith an introduction of the ...This review details the state of the art in research on top coal drawing mechanisms in Longwall top coal caving(LTCC)by examining the relevant literature over the last two decades.It startswith an introduction of the brief history and basic procedures of LTCC.The framework of research on the drawing mechanism,basic concepts,and some theoretical models of LTCC are detailed in sect.research framework of top coal drawingmechanism.The authors note that theTop coal drawbody(TCD),Top coal boundary(TCB)and Top coal recovery ratio(TCRR)are key factors in the drawingmechanism.TheBody-boundary-ratio(BBR)research system has been the classic framework for research over the last 20 years.The modified Bergmark-Roos model,which considers the effects of the supporting rear canopy,flowing velocity of top coal,and its shape factor,is optimal for characterizing the TCD.A 3Dmodel to describe the TCB that considers the thicknesses of the coal seam and roof strata is reviewed.In sect.physical testing and numerical simulation,the physical tests and numerical simulations in the literature are classified for ease of bibliographical review,and classic conclusions regarding the drawing mechanism of top coal are presented and discussedwith elaborate illustrations and descriptions.The deflection of the TCDis noted,and is caused by the shape of the rear canopy.The inclined coal seam always induces a largerTCD,and a deflection in theTCDhas also been observed in it.The effects of the drawing sequence and drawing interval on the TCRR are reviewed,where a long drawing interval is found to lead to significant loss of top coal.Its flowing behavior and velocity distribution are also presented.Sect.practical applications of drawingmechanisms forLTCCmines 4 summarizes over 10 cases where the TCRRof LTCCmines improved due to the guidance of the drawing mechanism.The final section provides a summary of the work here and some open questions.Prospective investigations are highlighted to give researchers guidance on promising issues in future research on LTCC.展开更多
Ground support is widely implemented to mitigate dynamic rock failures in underground mines.This paper investigated the ground support requirements in burst-prone mines to mitigate the catastrophic dynamic rock failur...Ground support is widely implemented to mitigate dynamic rock failures in underground mines.This paper investigated the ground support requirements in burst-prone mines to mitigate the catastrophic dynamic rock failures of rock and/or coal bursts.First,the ground support principles and considerations in burst-prone conditions are identified.The objective of a ground support system is to increase the capacity to accommodate rock fracturing in a rockburst and,in turn,to minimize the kinetic energy of the ejected material.The support capacities of various yielding rockbolts and integrated support systems are then investigated using the test results in the laboratory.Apart from the energy absorption and yielding deformation capacity,the initial stiffness and energy absorption rate are also critical factors when applying yielding rockbolts in practice.Adding rope lacing and mesh strap to surface support elements can substantially enhance the support performance of the system.In practice,semi-analytical and empirical approaches are often used to determine the ground support elements in burst-prone areas.Semi-analytical methods first evaluate the support demand in burst risk zones and then select support elements according to their laboratory test results.Alternatively,empirical methods determine the ground support elements according to the locally established empirical rating scheme,which usually ranks the support capacities of various support systems based on ground support conditions and damage conditions.The outcomes of this study can provide insights into ground support strategies and assist the mining industry to develop effective coal burst control technologies.展开更多
Discrete element calculations of the top-coal drawing process for diferent gangue-coal density ratios were conducted to investigate the efect of the gangue-coal density ratio on the drawing mechanism in longwall top-c...Discrete element calculations of the top-coal drawing process for diferent gangue-coal density ratios were conducted to investigate the efect of the gangue-coal density ratio on the drawing mechanism in longwall top-coal caving.The efects were analyzed for the drawing body,the top-coal boundary,and the recovery of top coal.The results show that for increasing density ratio,the initial drawing body on the goaf side is farther away from the drawing support and its width and volume gradually increase.The upper part of the sickle-shaped drawing body extends near the initial drawing body with increasing density ratio in the normal cycling stage,and the distance from the drawing body to the initial drawing body is its maximum width.The larger the density ratio,the smaller the height of the top coal above the goaf at the end of the initial drawing process.The height of the top-coal boundary decreases with increasing density ratio,until it reaches a limit.In a normal cycle,due to hysteretic development,the top-coal boundary moves toward the goaf until the density ratio is approximately 2.0,which is consistent with the physical experiment results.Finally,increasing the advance length of the working face is benefcial for increasing the overall recovery of top coal.展开更多
Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-c...Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.展开更多
In numerical simulation of the mechanical responses and acoustic emission(AE)characteristics of rocks under cyclic loading,the impacts of compositional heterogeneities of mineral grains have barely been considered.Thi...In numerical simulation of the mechanical responses and acoustic emission(AE)characteristics of rocks under cyclic loading,the impacts of compositional heterogeneities of mineral grains have barely been considered.This will lead to a poor reproduction of rock’s behaviors in terms of stress-strain relationship and micro-seismic characteristics in numerical simulation.This work aims to analyze and reveal the impact of parameter heterogeneity on the rock’s fatigue and micro-seismic properties based on PFC3D.Two distribution patterns(uniform and Weibull distributions),are implemented to assign four critical parameters(i.e.tensile strength,cohesion,parallel bond stiffness and linear stiffness)for 32 sets of numerical schemes.The results show that the models with high heterogeneity of tensile strength and cohesion can better reproduce the stress-strain relationship as well as the patterns of cumulative AE counts and energy magnitude.The evolution of the proportion of three-level AE events in the laboratory test is consistent with the numerical results when the highly heterogeneous tensile strength and cohesion are distributed.The numerical results can provide practical guidance to the PFC-based modeling of rock heterogeneity when exposed to multi-level cyclic loading and AE monitoring.展开更多
The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acous...The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acoustic emission(AE)behaviors of coal samples under multi-stage compressive cyclic loading with different loading and unloading rates,which is termed differential cyclic loading(DCL).A Weibull-distribution-based model with heterogeneous bond strengths is constructed by both considering the stress-strain relations and AE parameters.Six previously loaded samples were respectively grouped to indicate two DCL regimes,the damage mechanisms for the two groups are explicitly characterized via the time-stress-dependent variation of bond size multiplier,and it is found the two regimes correlate with distinct damage patterns,which involves the competition between stiffness hardening and softening.The numerical b-value is calculated based on the mag-nitudes of AE energy,the results show that both stress level and bond radius multiplier can impact the numerical b-value.The proposed numerical model succeeds in replicating the stress-strain relations of lab data as well as the elastic-after effect in DCL tests.The effect of damping on energy dissipation and phase shift in numerical model is summarized.展开更多
Pu-erh tea,a traditional Chinese beverage,performs an anti-obesity function,but the correlation between its components and efficacy remains unknown.Here,we screened two Pu-erh teas with significant anti-obesity effica...Pu-erh tea,a traditional Chinese beverage,performs an anti-obesity function,but the correlation between its components and efficacy remains unknown.Here,we screened two Pu-erh teas with significant anti-obesity efficacies from 11 teas.In vitro experiments revealed that lipid accumulation in L02 cells and lipid synthesis in 3T3-L1 cells were significantly better inhibited by Tea-B than Tea-A.Further in vivo experiments using model mice revealed that the differences in chemical components generated two pathways in the anti-obesity efficacy and mechanism of Pu-erh teas.Tea-A changes the histomorphology of brown adipose tissue(BAT)and increases the abundance of Coriobacteriaceae_UCG_002 and cyclic AMP in guts through high chemical contents of cyclopentasiloxane,decamethyl,tridecane and 1,2,3-trimethoxybenzene,eventually increasing BAT activation and fat browning gene expression;the high content of hexadecane and 1,2-dimethoxybenzene in Tea-B reduces white adipose tissue(WAT)accumulation and the process of fatty liver,increases the abundance of Odoribacter and sphinganine 1-phosphate,inhibits the expression of lipid synthesis and transport genes.These mechanistic findings on the association of the representative bioactive components in Pu-erh teas with the anti-obesity phenotypes,gut microbes,gut metabolite structure and anti-obesity pathways,which were obtained for the first time,provide foundations for developing functional Pu-erh tea.展开更多
基金This work is funded by the National Natural Science Foundation of China(Grant No.51934008,51674264 to Jiachen Wang,Grant No.51974320 to Shengli Yang)Fundamental Research Funds for the Central Universities(Grant No.06500182 to Zhengyang Song)Funds from State Key Laboratory of Coal Resources in Western China(SKLCRKF20-07 to Zhengyang Song).
文摘This review details the state of the art in research on top coal drawing mechanisms in Longwall top coal caving(LTCC)by examining the relevant literature over the last two decades.It startswith an introduction of the brief history and basic procedures of LTCC.The framework of research on the drawing mechanism,basic concepts,and some theoretical models of LTCC are detailed in sect.research framework of top coal drawingmechanism.The authors note that theTop coal drawbody(TCD),Top coal boundary(TCB)and Top coal recovery ratio(TCRR)are key factors in the drawingmechanism.TheBody-boundary-ratio(BBR)research system has been the classic framework for research over the last 20 years.The modified Bergmark-Roos model,which considers the effects of the supporting rear canopy,flowing velocity of top coal,and its shape factor,is optimal for characterizing the TCD.A 3Dmodel to describe the TCB that considers the thicknesses of the coal seam and roof strata is reviewed.In sect.physical testing and numerical simulation,the physical tests and numerical simulations in the literature are classified for ease of bibliographical review,and classic conclusions regarding the drawing mechanism of top coal are presented and discussedwith elaborate illustrations and descriptions.The deflection of the TCDis noted,and is caused by the shape of the rear canopy.The inclined coal seam always induces a largerTCD,and a deflection in theTCDhas also been observed in it.The effects of the drawing sequence and drawing interval on the TCRR are reviewed,where a long drawing interval is found to lead to significant loss of top coal.Its flowing behavior and velocity distribution are also presented.Sect.practical applications of drawingmechanisms forLTCCmines 4 summarizes over 10 cases where the TCRRof LTCCmines improved due to the guidance of the drawing mechanism.The final section provides a summary of the work here and some open questions.Prospective investigations are highlighted to give researchers guidance on promising issues in future research on LTCC.
文摘Ground support is widely implemented to mitigate dynamic rock failures in underground mines.This paper investigated the ground support requirements in burst-prone mines to mitigate the catastrophic dynamic rock failures of rock and/or coal bursts.First,the ground support principles and considerations in burst-prone conditions are identified.The objective of a ground support system is to increase the capacity to accommodate rock fracturing in a rockburst and,in turn,to minimize the kinetic energy of the ejected material.The support capacities of various yielding rockbolts and integrated support systems are then investigated using the test results in the laboratory.Apart from the energy absorption and yielding deformation capacity,the initial stiffness and energy absorption rate are also critical factors when applying yielding rockbolts in practice.Adding rope lacing and mesh strap to surface support elements can substantially enhance the support performance of the system.In practice,semi-analytical and empirical approaches are often used to determine the ground support elements in burst-prone areas.Semi-analytical methods first evaluate the support demand in burst risk zones and then select support elements according to their laboratory test results.Alternatively,empirical methods determine the ground support elements according to the locally established empirical rating scheme,which usually ranks the support capacities of various support systems based on ground support conditions and damage conditions.The outcomes of this study can provide insights into ground support strategies and assist the mining industry to develop effective coal burst control technologies.
基金supported by the Natural Science Foundation of China,China(Grant No.51904305)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology(Grant No.SKLCRSM19KF023)+2 种基金the Fundamental Research Funds for the Central Universities(Grant No.2022YQNY03)the Research Fund of Key Laboratory of Safety and High-efficiency Coal Mining,Ministry of Education(Grant No.JYBSYS2021204)the Open Fund of State Key Laboratory of Coal Resources and Safe Mining(Grant No.SKLCRSM21KFA09).
文摘Discrete element calculations of the top-coal drawing process for diferent gangue-coal density ratios were conducted to investigate the efect of the gangue-coal density ratio on the drawing mechanism in longwall top-coal caving.The efects were analyzed for the drawing body,the top-coal boundary,and the recovery of top coal.The results show that for increasing density ratio,the initial drawing body on the goaf side is farther away from the drawing support and its width and volume gradually increase.The upper part of the sickle-shaped drawing body extends near the initial drawing body with increasing density ratio in the normal cycling stage,and the distance from the drawing body to the initial drawing body is its maximum width.The larger the density ratio,the smaller the height of the top coal above the goaf at the end of the initial drawing process.The height of the top-coal boundary decreases with increasing density ratio,until it reaches a limit.In a normal cycle,due to hysteretic development,the top-coal boundary moves toward the goaf until the density ratio is approximately 2.0,which is consistent with the physical experiment results.Finally,increasing the advance length of the working face is benefcial for increasing the overall recovery of top coal.
基金financially supported by the Coal Joint Funds of the National Natural Science Foundation of China(No.U1361209)the National Basic Research Program of China(973 Program)(No.2013CB227903)
文摘Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.
基金funded by the Funds from Joint National-Local Engineering Research Center for Safe and Precise Coal Mining(Grant No.EC2021004).
文摘In numerical simulation of the mechanical responses and acoustic emission(AE)characteristics of rocks under cyclic loading,the impacts of compositional heterogeneities of mineral grains have barely been considered.This will lead to a poor reproduction of rock’s behaviors in terms of stress-strain relationship and micro-seismic characteristics in numerical simulation.This work aims to analyze and reveal the impact of parameter heterogeneity on the rock’s fatigue and micro-seismic properties based on PFC3D.Two distribution patterns(uniform and Weibull distributions),are implemented to assign four critical parameters(i.e.tensile strength,cohesion,parallel bond stiffness and linear stiffness)for 32 sets of numerical schemes.The results show that the models with high heterogeneity of tensile strength and cohesion can better reproduce the stress-strain relationship as well as the patterns of cumulative AE counts and energy magnitude.The evolution of the proportion of three-level AE events in the laboratory test is consistent with the numerical results when the highly heterogeneous tensile strength and cohesion are distributed.The numerical results can provide practical guidance to the PFC-based modeling of rock heterogeneity when exposed to multi-level cyclic loading and AE monitoring.
基金funded by Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining (GJNY-20-113-03),SHGF-16-19the Fundamental Research Funds for the Central Universities (06500182)+2 种基金Funds from Joint National-Local Engineering Research Center for Safe and Precise Coal Mining (EC2021004)Funds from State Key Laboratory of Coal Resources in Western China (SKLCRKF20-07)Funds from Humboldt Research Fellowship,Funds from NSFC (52204086).
文摘The stability of coal walls(pillars)can be seriously undermined by diverse in-situ dynamic disturbances.Based on a 3D par-ticle model,this work strives to numerically replicate the major mechanical responses and acoustic emission(AE)behaviors of coal samples under multi-stage compressive cyclic loading with different loading and unloading rates,which is termed differential cyclic loading(DCL).A Weibull-distribution-based model with heterogeneous bond strengths is constructed by both considering the stress-strain relations and AE parameters.Six previously loaded samples were respectively grouped to indicate two DCL regimes,the damage mechanisms for the two groups are explicitly characterized via the time-stress-dependent variation of bond size multiplier,and it is found the two regimes correlate with distinct damage patterns,which involves the competition between stiffness hardening and softening.The numerical b-value is calculated based on the mag-nitudes of AE energy,the results show that both stress level and bond radius multiplier can impact the numerical b-value.The proposed numerical model succeeds in replicating the stress-strain relations of lab data as well as the elastic-after effect in DCL tests.The effect of damping on energy dissipation and phase shift in numerical model is summarized.
基金The financial support received from the Shenzhen Science and Technology Innovation Commission(KCXFZ20201221173207022,WDZC20200821141349001)Shenzhen Bay Laboratory Startup Fund(21310041,S234602003)。
文摘Pu-erh tea,a traditional Chinese beverage,performs an anti-obesity function,but the correlation between its components and efficacy remains unknown.Here,we screened two Pu-erh teas with significant anti-obesity efficacies from 11 teas.In vitro experiments revealed that lipid accumulation in L02 cells and lipid synthesis in 3T3-L1 cells were significantly better inhibited by Tea-B than Tea-A.Further in vivo experiments using model mice revealed that the differences in chemical components generated two pathways in the anti-obesity efficacy and mechanism of Pu-erh teas.Tea-A changes the histomorphology of brown adipose tissue(BAT)and increases the abundance of Coriobacteriaceae_UCG_002 and cyclic AMP in guts through high chemical contents of cyclopentasiloxane,decamethyl,tridecane and 1,2,3-trimethoxybenzene,eventually increasing BAT activation and fat browning gene expression;the high content of hexadecane and 1,2-dimethoxybenzene in Tea-B reduces white adipose tissue(WAT)accumulation and the process of fatty liver,increases the abundance of Odoribacter and sphinganine 1-phosphate,inhibits the expression of lipid synthesis and transport genes.These mechanistic findings on the association of the representative bioactive components in Pu-erh teas with the anti-obesity phenotypes,gut microbes,gut metabolite structure and anti-obesity pathways,which were obtained for the first time,provide foundations for developing functional Pu-erh tea.
