Lithium-sulfur (Li-S) batteries have gained great attention due to the high theoretical energy density and low cost,yet their further commercialization has been obstructed by the notorious shuttle effect and sluggish ...Lithium-sulfur (Li-S) batteries have gained great attention due to the high theoretical energy density and low cost,yet their further commercialization has been obstructed by the notorious shuttle effect and sluggish redox dynamics.Herein,we supply a strategy to optimize the electron structure of Ni_(2)P by concurrently introducing B-doped atoms and P vacancies in Ni_(2)P (Vp-B-Ni_(2)P),thereby enhancing the bidirectional sulfur conversion.The study indicates that the simultaneous introduction of B-doped atoms and P vacancies in Ni_(2)P causes the redistribution of electron around Ni atoms,bringing about the upward shift of d-band center of Ni atoms and effective d-p orbital hybridization between Ni atoms and sulfur species,thus strengthening the chemical anchoring for lithium polysulfides (LiPSs) as well as expediting the bidirectional conversion kinetics of sulfur species.Meanwhile,theoretical calculations reveal that the incorporation of B-doped atoms and P vacancies in Ni_(2)P selectively promotes Li2S dissolution and nucleation processes.Thus,the Li-S batteries with Vp-B-Ni_(2)P-separators present outstanding rate ability of 777 m A h g^(-1)at 5 C and high areal capacity of 8.03 mA h cm^(-2)under E/S of 5μL mg^(-1)and sulfur loading of 7.20 mg cm^(-2).This work elucidates that introducing heteroatom and vacancy in metal phosphide collaboratively regulates the electron structure to accelerate bidirectional sulfur conversion.展开更多
It is found that when the parity–time symmetry phenomenon is introduced into the resonant optical gyro system and it works near the exceptional point,the sensitivity can in theory be significantly amplified at low an...It is found that when the parity–time symmetry phenomenon is introduced into the resonant optical gyro system and it works near the exceptional point,the sensitivity can in theory be significantly amplified at low angular rate.However,in fact,the exceptional point is easily disturbed by external environmental variables,which means that it depends on harsh experimental environment and strong control ability,so it is difficult to move towards practical application.Here,we propose a new angular rate sensor structure based on exceptional surface,which has the advantages of high sensitivity and high robustness.The system consists of two fiber-optic ring resonators and two optical loop mirrors,and one of the resonators contains a variable ratio coupler and a variable optical attenuator.We theoretically analyze the system response,and the effects of phase and coupling ratio on the system response.Finally,compared with the conventional resonant gyro,the sensitivity of this exceptional surface angular rate sensor can be improved by about 300 times at low speed.In addition,by changing the loss coefficient in the ring resonator,we can achieve a wide range of 600 rad/s.This scheme provides a new approach for the development of ultra-high sensitivity and wide range angular rate sensors in the future.展开更多
Lamellar calcite veins are prevalent in carbonate-rich,lacustrine dark shale.The formation mechanisms of these veins have been extensively debated,focusing on factors such as timing,depth,material source,and driving f...Lamellar calcite veins are prevalent in carbonate-rich,lacustrine dark shale.The formation mechanisms of these veins have been extensively debated,focusing on factors such as timing,depth,material source,and driving forces.This paper examines dark lacustrine shale lamellar calcite veins in the Paleogene strata of Dongying Depression,using various analytical techniques:petrography,isotope geochemistry,cathodoluminescence,inclusion thermometry,and electron probe micro-analysis.Two distinct types of calcite veins have been identified:granular calcite veins and sparry calcite veins.These two types differ significantly in color,grain structure,morphology,and inclusions.Through further investigation,it was observed that vein generation occurred from the shallow burial period to the maturation of organic matter,with a transition from granular calcite veins to sparry calcite veins.The granular calcite veins exhibit characteristics associated with the shallow burial period,including plastically deformed laminae and veins,the development of strawberry pyrite,the absence of oil and gas,weak fractionation in oxygen isotopes,and their contact relationship with sparry calcite veins.These granular calcite veins were likely influenced by the reduction of sulfate bacteria.On the other hand,sparry calcite veins with fibrous grains are antitaxial and closely linked to the evolution and maturation of organic matter.They contain oil and gas inclusions and show a distribution range of homogenization temperature between 90℃ and 120℃ and strong fractionation in oxygen isotopes,indicating formation during the hydrocarbon expulsion period.The carbon isotope analysis of the surrounding rocks and veins suggests that the material for vein formation originates from the shale itself,specifically authigenic micritic calcite modified by the action of methanogens.The opening of horizontal fractures and vein formation is likely driven by fluid overpressure resulting from undercompaction and hydrocarbon expulsion.Veins may form rapidly or through multi-stage composite processes.Early veins are predominantly formed in situ,while late veins are a result of continuous fluid migration and convergence.Furthermore,the veins continue to undergo modification even after formation.This study emphasizes that the formation of lamellar calcite veins in shale is a complex diagenetic process influenced by multiple factors:biology,organic matter,and inorganic processes,all operating at various stages throughout the shale's diagenetic history.展开更多
Rechargeable lithium batteries with high-capacity cathodes/anodes promise high energy densities for nextgeneration electrochemical energy storage.However,the associated limitations at various scales greatly hinder the...Rechargeable lithium batteries with high-capacity cathodes/anodes promise high energy densities for nextgeneration electrochemical energy storage.However,the associated limitations at various scales greatly hinder their practical applications.Functional gradient material(FGM)design endows the electrode materials with property gradient,thus providing great opportunities to address the kinetics and stability obstacles.To date,still no review or perspective has covered recent advancements in gradient design at multiple scales for boosting lithium battery performances.To fill this void,this work provides a timely and comprehensive overview of this exciting and sustainable research field.We begin by overviewing the fundamental features of FGM and the rationales of gradient design for improved electrochemical performance.Then,we comprehensively review FGM design for rechargeable lithium batteries at various scales,including natural or artificial solid electrolyte interphase(SEI)at the nanoscale,micrometer-scale electrode particles,and macroscale electrode films.The link between gradient structure design and improved electrochemical performance is particularly highlighted.The most recent research into constructing novel functional gradients,such as valence and temperature gradients,has also been explored.Finally,we discussed the current constraints and future scope of FGM in rechargeable lithium batteries,aiming to inspire the development of novel FGM for next-generation high-performance lithium batteries.展开更多
Accurate estimations of biomass and its temporal dynamics are crucial for monitoring the carbon cycle in forest ecosystems and assessing forest carbon sequestration potentials.Recent studies have shown that integratin...Accurate estimations of biomass and its temporal dynamics are crucial for monitoring the carbon cycle in forest ecosystems and assessing forest carbon sequestration potentials.Recent studies have shown that integrating process-based models(PBMs)with remote sensing data can enhance simulations from stand to regional scales,significantly improving the ability to simulate forest growth and carbon stock dynamics.However,the utilization of PBMs for large-scale simulation of larch carbon storage distribution is still limited.In this study,we applied the parameterized 3-PG(Physiological Principles Predicting Growth)model across the Mengjiagang Forest Farm(MFF)to make broad-scale predictions of the biomass and carbon stocks of Larix olgensis plantation.The model was used to simulate average diameter at breast height(DBH)and total biomass,which were later validated with a wide range of observation data including sample plot data,forest management inventory data,and airborne laser scanning data.The results showed that the 3-PG model had relatively high accuracy for predicting both DBH and total biomass at stand and regional scale,with determination coefficients ranging from 0.78 to 0.88.Based on the estimation of total biomass,we successfully produced a carbon stock map of the Larix olgensis plantation in MFF with a spatial resolution of 20 m,which helps with relevant management advice.These findings indicate that the integration of 3-PG model and remote sensing data can well predict the biomass and carbon stock at regional and even larger scales.In addition,this integration facilitates the evaluation of forest carbon sequestration capacity and the development of forest management plans.展开更多
Grain refinement is a satisfying method to enhance the comprehensive performance of Mg alloys,and using grain refiners to improve the quality of Mg castings has become a common practice in the current casting industry...Grain refinement is a satisfying method to enhance the comprehensive performance of Mg alloys,and using grain refiners to improve the quality of Mg castings has become a common practice in the current casting industry.In this study,the effects of Al-CeO_(2)-Mg grain refiner addition on microstructure,cast fluidity,and mechanical properties of AZ91 alloy were systemically investigated by OM,SEM,DSC,TEM,sand Archimedean spiral mold fluidity test,and tensile test.The results show that the Al-CeO_(2)-Mg grain refiner has a remarkable effect on as-cast AZ91 alloy including notable grain refinement,enhancement of cast fluidity,and improvement of tensile properties.The average grain size of AZ91 alloy is refined by 63%with 1.0wt.%Al-CeO_(2)-Mg grain refiner.Meanwhile,the casting flow length of the as-cast AZ91 alloy is increased from 332 mm to 440 mm.The improvement of cast fluidity is attributed to the decreased liquidus temperature,shortening of solid-liquid two-phase temperature range,and refinement of microstructure.展开更多
BACKGROUND Previous studies have indicated bidirectional associations between urate levels and inflammatory bowel disease(IBD),including ulcerative colitis(UC)and Crohn’s disease(CD).However,it remains unclear whethe...BACKGROUND Previous studies have indicated bidirectional associations between urate levels and inflammatory bowel disease(IBD),including ulcerative colitis(UC)and Crohn’s disease(CD).However,it remains unclear whether the observations are causal because of confounding factors.AIM To investigate the causal associations between urate levels and IBD using bidirec-tional Mendelian randomization(MR).METHODS Independent genetic variants for urate levels and IBD were selected as instru-mental variables from published genome-wide association studies(GWASs).Summary statistics for instrument-outcome associations were retrieved from three separate databases for IBD(the UK Biobank,the FinnGen database and a large GWAS meta-analysis)and one for urate levels(a large GWAS meta-analysis).MR analyses included the inverse-variance-weighted method,weighted-median estimator,MR-Egger and sensitivity analyses(MR-PRESSO).A meta-analysis was also conducted to merge the data from separate outcome databases using a fixed-effects model.RESULTS Genetically higher serum urate levels were strongly associated with an increased risk of UC[odds ratio(OR):1.95,95%confidence interval(CI):1.86-2.05]after outlier correction,and the ORs(95%CIs)for IBD and CD were 0.94(95%CI:0.86-1.03)and 0.91(95%CI:0.80-1.04),respectively.Animal studies have confirmed the positive association between urate levels and UC.Moreover,genetically predicted IBD was inversely related to urate levels(OR:0.97,95%CI:0.94-0.99).However,no association was observed between genetically influenced UC or CD and urate levels.CONCLUSION Urate levels might be risk factors for UC,whereas genetically predicted IBD was inversely associated with urate levels.These findings provide essential new insight for treating and preventing IBD.展开更多
AIM:To investigate the efficacy and safety of propofol sedation for endoscopic retrograde cholangiopancreatography(ERCP).METHODS:Databases including PubMed,Embase,and the Cochrane Central Register of Controlled Trials...AIM:To investigate the efficacy and safety of propofol sedation for endoscopic retrograde cholangiopancreatography(ERCP).METHODS:Databases including PubMed,Embase,and the Cochrane Central Register of Controlled Trials updated as of October 2010 were searched.Main outcome measures were ERCP procedure duration,recovery time,incidence of hypotension and hypoxia.RESULTS:Six trials with a total of 663 patients were included.The pooled mean difference in ERCP procedure duration between the propofol and traditional sedative agents was-8.05(95%CI:-16.74 to 0.63),with no significant difference between the groups.Thepooled mean difference in the recovery time was-18.69(95%CI:-25.44 to-11.93),which showed a significant reduction with use of propofol sedation.Compared with traditional sedative agents,the pooled OR with propofol sedation for ERCP causing hypotension or hypoxia was 1.69(95%CI:0.82-3.50)and 0.90(95%CI:0.55-1.49),respectively,which indicated no significant difference between the groups.CONCLUSION:Propofol sedation during ERCP leads to shorter recovery time without an increase of cardiopulmonary side effects.Propofol sedation can provide adequate sedation during ERCP.展开更多
BACKGROUND Artificial intelligence in colonoscopy is an emerging field,and its application may help colonoscopists improve inspection quality and reduce the rate of missed polyps and adenomas.Several deep learning-bas...BACKGROUND Artificial intelligence in colonoscopy is an emerging field,and its application may help colonoscopists improve inspection quality and reduce the rate of missed polyps and adenomas.Several deep learning-based computer-assisted detection(CADe)techniques were established from small single-center datasets,and unrepresentative learning materials might confine their application and generalization in wide practice.Although CADes have been reported to identify polyps in colonoscopic images and videos in real time,their diagnostic performance deserves to be further validated in clinical practice.AIM To train and test a CADe based on multicenter high-quality images of polyps and preliminarily validate it in clinical colonoscopies.METHODS With high-quality screening and labeling from 55 qualified colonoscopists,a dataset consisting of over 71000 images from 20 centers was used to train and test a deep learning-based CADe.In addition,the real-time diagnostic performance of CADe was tested frame by frame in 47 unaltered full-ranged videos that contained 86 histologically confirmed polyps.Finally,we conducted a selfcontrolled observational study to validate the diagnostic performance of CADe in real-world colonoscopy with the main outcome measure of polyps per colonoscopy in Changhai Hospital.RESULTS The CADe was able to identify polyps in the test dataset with 95.0%sensitivity and 99.1%specificity.For colonoscopy videos,all 86 polyps were detected with 92.2%sensitivity and 93.6%specificity in frame-by-frame analysis.In the prospective validation,the sensitivity of CAD in identifying polyps was 98.4%(185/188).Folds,reflections of light and fecal fluid were the main causes of false positives in both the test dataset and clinical colonoscopies.Colonoscopists can detect more polyps(0.90 vs 0.82,P<0.001)and adenomas(0.32 vs 0.30,P=0.045)with the aid of CADe,particularly polyps<5 mm and flat polyps(0.65 vs 0.57,P<0.001;0.74 vs 0.67,P=0.001,respectively).However,high efficacy is not realized in colonoscopies with inadequate bowel preparation and withdrawal time(P=0.32;P=0.16,respectively).CONCLUSION CADe is feasible in the clinical setting and might help endoscopists detect more polyps and adenomas,and further confirmation is warranted.展开更多
In order to broaden the application of wrought Mg alloy sheets in the automotive industry,the influence of Ca and Sm alloying on the texture evolution,mechanical properties,and formability of a hot-rolled Mg-2Zn-0.2Mn...In order to broaden the application of wrought Mg alloy sheets in the automotive industry,the influence of Ca and Sm alloying on the texture evolution,mechanical properties,and formability of a hot-rolled Mg-2Zn-0.2Mn alloy was investigated by OM,XRD,SEM,EBSD,tensile tests,and Erichsen test.The results showed that the average grain size and basal texture intensity of Mg-2Zn-0.2Mn alloys were remarkably decreased after Ca and Sm additions.0.64 wt.%Ca or 0.48 wt.%Sm addition significantly increased the tensile strength,ductility and formability.Moreover,the synergetic addition of Sm and Ca improved the ductility and formability of Mg-2Zn-0.2Mn alloy,which was due to the change of Ca distribution and further reduction of the size of Ca-containing particles by Sm addition.The results provided a possibility of replacing RE elements with Ca and Sm in Mg alloys which bring about outstanding mechanical properties and formability.展开更多
Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in therm...Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in thermal power plants,the measurement repeatability of LIBS needs to be further improved due to the difficulty in controlling the stability of the generated plasmas at present.In this paper,we propose a novel x-ray fluorescence(XRF) assisted LIBS method for high repeatability analysis of coal quality,which not only inherits the ability of LIBS to directly analyze organic elements such as C and H in coal,but also uses XRF to make up for the lack of stability of LIBS in determining other inorganic ash-forming elements.With the combination of elemental lines in LIBS and XRF spectra,the principal component analysis and the partial least squares are used to establish the prediction model and perform multi-elemental and proximate analysis of coal.Quantitative analysis results show that the relative standard deviation(RSD) of C is 0.15%,the RSDs of other elements are less than 4%,and the standard deviations of calorific value,ash content,sulfur content and volatile matter are 0.11 MJ kg,0.17%,0.79% and 0.41%respectively,indicating that the method has good repeatability in determination of coal quality.This work is helpful to accelerate the development of LIBS in the field of rapid measurement of coal entering the power plant and on-line monitoring of coal entering the furnace.展开更多
基金Institute of Technology Research Fund Program for Young Scholars21C Innovation Laboratory Contemporary Amperex Technology Co.,Limited,Ninde, 352100, China (21C–OP-202314)。
文摘Lithium-sulfur (Li-S) batteries have gained great attention due to the high theoretical energy density and low cost,yet their further commercialization has been obstructed by the notorious shuttle effect and sluggish redox dynamics.Herein,we supply a strategy to optimize the electron structure of Ni_(2)P by concurrently introducing B-doped atoms and P vacancies in Ni_(2)P (Vp-B-Ni_(2)P),thereby enhancing the bidirectional sulfur conversion.The study indicates that the simultaneous introduction of B-doped atoms and P vacancies in Ni_(2)P causes the redistribution of electron around Ni atoms,bringing about the upward shift of d-band center of Ni atoms and effective d-p orbital hybridization between Ni atoms and sulfur species,thus strengthening the chemical anchoring for lithium polysulfides (LiPSs) as well as expediting the bidirectional conversion kinetics of sulfur species.Meanwhile,theoretical calculations reveal that the incorporation of B-doped atoms and P vacancies in Ni_(2)P selectively promotes Li2S dissolution and nucleation processes.Thus,the Li-S batteries with Vp-B-Ni_(2)P-separators present outstanding rate ability of 777 m A h g^(-1)at 5 C and high areal capacity of 8.03 mA h cm^(-2)under E/S of 5μL mg^(-1)and sulfur loading of 7.20 mg cm^(-2).This work elucidates that introducing heteroatom and vacancy in metal phosphide collaboratively regulates the electron structure to accelerate bidirectional sulfur conversion.
基金supported in part by the National Natural Science Foundation of China (Grant Nos.62273314,U21A20141,and 51821003)Fundamental Research Program of Shanxi Province (Grant No.202303021224008)Shanxi Province Key Laboratory of Quantum Sensing and Precision Measure-ment (Grant No.201905D121001).
文摘It is found that when the parity–time symmetry phenomenon is introduced into the resonant optical gyro system and it works near the exceptional point,the sensitivity can in theory be significantly amplified at low angular rate.However,in fact,the exceptional point is easily disturbed by external environmental variables,which means that it depends on harsh experimental environment and strong control ability,so it is difficult to move towards practical application.Here,we propose a new angular rate sensor structure based on exceptional surface,which has the advantages of high sensitivity and high robustness.The system consists of two fiber-optic ring resonators and two optical loop mirrors,and one of the resonators contains a variable ratio coupler and a variable optical attenuator.We theoretically analyze the system response,and the effects of phase and coupling ratio on the system response.Finally,compared with the conventional resonant gyro,the sensitivity of this exceptional surface angular rate sensor can be improved by about 300 times at low speed.In addition,by changing the loss coefficient in the ring resonator,we can achieve a wide range of 600 rad/s.This scheme provides a new approach for the development of ultra-high sensitivity and wide range angular rate sensors in the future.
基金the support of the National Natural Science Foundation of China(project number:41572123)。
文摘Lamellar calcite veins are prevalent in carbonate-rich,lacustrine dark shale.The formation mechanisms of these veins have been extensively debated,focusing on factors such as timing,depth,material source,and driving forces.This paper examines dark lacustrine shale lamellar calcite veins in the Paleogene strata of Dongying Depression,using various analytical techniques:petrography,isotope geochemistry,cathodoluminescence,inclusion thermometry,and electron probe micro-analysis.Two distinct types of calcite veins have been identified:granular calcite veins and sparry calcite veins.These two types differ significantly in color,grain structure,morphology,and inclusions.Through further investigation,it was observed that vein generation occurred from the shallow burial period to the maturation of organic matter,with a transition from granular calcite veins to sparry calcite veins.The granular calcite veins exhibit characteristics associated with the shallow burial period,including plastically deformed laminae and veins,the development of strawberry pyrite,the absence of oil and gas,weak fractionation in oxygen isotopes,and their contact relationship with sparry calcite veins.These granular calcite veins were likely influenced by the reduction of sulfate bacteria.On the other hand,sparry calcite veins with fibrous grains are antitaxial and closely linked to the evolution and maturation of organic matter.They contain oil and gas inclusions and show a distribution range of homogenization temperature between 90℃ and 120℃ and strong fractionation in oxygen isotopes,indicating formation during the hydrocarbon expulsion period.The carbon isotope analysis of the surrounding rocks and veins suggests that the material for vein formation originates from the shale itself,specifically authigenic micritic calcite modified by the action of methanogens.The opening of horizontal fractures and vein formation is likely driven by fluid overpressure resulting from undercompaction and hydrocarbon expulsion.Veins may form rapidly or through multi-stage composite processes.Early veins are predominantly formed in situ,while late veins are a result of continuous fluid migration and convergence.Furthermore,the veins continue to undergo modification even after formation.This study emphasizes that the formation of lamellar calcite veins in shale is a complex diagenetic process influenced by multiple factors:biology,organic matter,and inorganic processes,all operating at various stages throughout the shale's diagenetic history.
基金financial support from the National Natural Science Foundation of China(Nos.52261160384 and 52072208)the Project of Department of Education of Guangdong Province(No.2022ZDZX3018)+2 种基金the Natural Science Foundation of Guangdong(No.2023A1515010020)the Innovation and Technology Fund(No.ITS-325-22FP)the Shenzhen Science and Technology Program(No.KJZD20230923114107014)。
文摘Rechargeable lithium batteries with high-capacity cathodes/anodes promise high energy densities for nextgeneration electrochemical energy storage.However,the associated limitations at various scales greatly hinder their practical applications.Functional gradient material(FGM)design endows the electrode materials with property gradient,thus providing great opportunities to address the kinetics and stability obstacles.To date,still no review or perspective has covered recent advancements in gradient design at multiple scales for boosting lithium battery performances.To fill this void,this work provides a timely and comprehensive overview of this exciting and sustainable research field.We begin by overviewing the fundamental features of FGM and the rationales of gradient design for improved electrochemical performance.Then,we comprehensively review FGM design for rechargeable lithium batteries at various scales,including natural or artificial solid electrolyte interphase(SEI)at the nanoscale,micrometer-scale electrode particles,and macroscale electrode films.The link between gradient structure design and improved electrochemical performance is particularly highlighted.The most recent research into constructing novel functional gradients,such as valence and temperature gradients,has also been explored.Finally,we discussed the current constraints and future scope of FGM in rechargeable lithium batteries,aiming to inspire the development of novel FGM for next-generation high-performance lithium batteries.
基金funded by National Key Research and Development Program(2023YFD220080430&2017YFD0600404)。
文摘Accurate estimations of biomass and its temporal dynamics are crucial for monitoring the carbon cycle in forest ecosystems and assessing forest carbon sequestration potentials.Recent studies have shown that integrating process-based models(PBMs)with remote sensing data can enhance simulations from stand to regional scales,significantly improving the ability to simulate forest growth and carbon stock dynamics.However,the utilization of PBMs for large-scale simulation of larch carbon storage distribution is still limited.In this study,we applied the parameterized 3-PG(Physiological Principles Predicting Growth)model across the Mengjiagang Forest Farm(MFF)to make broad-scale predictions of the biomass and carbon stocks of Larix olgensis plantation.The model was used to simulate average diameter at breast height(DBH)and total biomass,which were later validated with a wide range of observation data including sample plot data,forest management inventory data,and airborne laser scanning data.The results showed that the 3-PG model had relatively high accuracy for predicting both DBH and total biomass at stand and regional scale,with determination coefficients ranging from 0.78 to 0.88.Based on the estimation of total biomass,we successfully produced a carbon stock map of the Larix olgensis plantation in MFF with a spatial resolution of 20 m,which helps with relevant management advice.These findings indicate that the integration of 3-PG model and remote sensing data can well predict the biomass and carbon stock at regional and even larger scales.In addition,this integration facilitates the evaluation of forest carbon sequestration capacity and the development of forest management plans.
基金supported by the National Natural Science Foundation of China(52171030)the National Key Research and Development Program of China(2018YFA0702903).
文摘Grain refinement is a satisfying method to enhance the comprehensive performance of Mg alloys,and using grain refiners to improve the quality of Mg castings has become a common practice in the current casting industry.In this study,the effects of Al-CeO_(2)-Mg grain refiner addition on microstructure,cast fluidity,and mechanical properties of AZ91 alloy were systemically investigated by OM,SEM,DSC,TEM,sand Archimedean spiral mold fluidity test,and tensile test.The results show that the Al-CeO_(2)-Mg grain refiner has a remarkable effect on as-cast AZ91 alloy including notable grain refinement,enhancement of cast fluidity,and improvement of tensile properties.The average grain size of AZ91 alloy is refined by 63%with 1.0wt.%Al-CeO_(2)-Mg grain refiner.Meanwhile,the casting flow length of the as-cast AZ91 alloy is increased from 332 mm to 440 mm.The improvement of cast fluidity is attributed to the decreased liquidus temperature,shortening of solid-liquid two-phase temperature range,and refinement of microstructure.
基金Supported by National Natural Science Foundation of China,No.82170567,No.81873546,No.82170568,and No.82300627Program of Shanghai Academic/Technology Research Leader,No.22XD1425000+4 种基金The"Shu Guang"project of Shanghai Municipal Education Commission and Shanghai Education Development Foundation,No.19SG30,ChinaDeep Blue Project of Naval Medical University(Pilot Talent Plan)The Chenguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission,No.22CGA42The Shanghai Sailing Program,No.23YF1458600and Shanghai Natural Science Foundation,No.23ZR1478700.
文摘BACKGROUND Previous studies have indicated bidirectional associations between urate levels and inflammatory bowel disease(IBD),including ulcerative colitis(UC)and Crohn’s disease(CD).However,it remains unclear whether the observations are causal because of confounding factors.AIM To investigate the causal associations between urate levels and IBD using bidirec-tional Mendelian randomization(MR).METHODS Independent genetic variants for urate levels and IBD were selected as instru-mental variables from published genome-wide association studies(GWASs).Summary statistics for instrument-outcome associations were retrieved from three separate databases for IBD(the UK Biobank,the FinnGen database and a large GWAS meta-analysis)and one for urate levels(a large GWAS meta-analysis).MR analyses included the inverse-variance-weighted method,weighted-median estimator,MR-Egger and sensitivity analyses(MR-PRESSO).A meta-analysis was also conducted to merge the data from separate outcome databases using a fixed-effects model.RESULTS Genetically higher serum urate levels were strongly associated with an increased risk of UC[odds ratio(OR):1.95,95%confidence interval(CI):1.86-2.05]after outlier correction,and the ORs(95%CIs)for IBD and CD were 0.94(95%CI:0.86-1.03)and 0.91(95%CI:0.80-1.04),respectively.Animal studies have confirmed the positive association between urate levels and UC.Moreover,genetically predicted IBD was inversely related to urate levels(OR:0.97,95%CI:0.94-0.99).However,no association was observed between genetically influenced UC or CD and urate levels.CONCLUSION Urate levels might be risk factors for UC,whereas genetically predicted IBD was inversely associated with urate levels.These findings provide essential new insight for treating and preventing IBD.
基金Supported by The grants from the Department of Anesthesiology and Intensive Care of Changhai Hospital,Shanghai,China
文摘AIM:To investigate the efficacy and safety of propofol sedation for endoscopic retrograde cholangiopancreatography(ERCP).METHODS:Databases including PubMed,Embase,and the Cochrane Central Register of Controlled Trials updated as of October 2010 were searched.Main outcome measures were ERCP procedure duration,recovery time,incidence of hypotension and hypoxia.RESULTS:Six trials with a total of 663 patients were included.The pooled mean difference in ERCP procedure duration between the propofol and traditional sedative agents was-8.05(95%CI:-16.74 to 0.63),with no significant difference between the groups.Thepooled mean difference in the recovery time was-18.69(95%CI:-25.44 to-11.93),which showed a significant reduction with use of propofol sedation.Compared with traditional sedative agents,the pooled OR with propofol sedation for ERCP causing hypotension or hypoxia was 1.69(95%CI:0.82-3.50)and 0.90(95%CI:0.55-1.49),respectively,which indicated no significant difference between the groups.CONCLUSION:Propofol sedation during ERCP leads to shorter recovery time without an increase of cardiopulmonary side effects.Propofol sedation can provide adequate sedation during ERCP.
基金the National Key R&D Program of China,No.2018YFC1313103the National Natural Science Foundation of China,No.81670473 and No.81873546+1 种基金the“Shu Guang”Project of Shanghai Municipal Education Commission and Shanghai Education Development Foundation,No.19SG30the Key Area Research and Development Program of Guangdong Province,China,No.2018B010111001.
文摘BACKGROUND Artificial intelligence in colonoscopy is an emerging field,and its application may help colonoscopists improve inspection quality and reduce the rate of missed polyps and adenomas.Several deep learning-based computer-assisted detection(CADe)techniques were established from small single-center datasets,and unrepresentative learning materials might confine their application and generalization in wide practice.Although CADes have been reported to identify polyps in colonoscopic images and videos in real time,their diagnostic performance deserves to be further validated in clinical practice.AIM To train and test a CADe based on multicenter high-quality images of polyps and preliminarily validate it in clinical colonoscopies.METHODS With high-quality screening and labeling from 55 qualified colonoscopists,a dataset consisting of over 71000 images from 20 centers was used to train and test a deep learning-based CADe.In addition,the real-time diagnostic performance of CADe was tested frame by frame in 47 unaltered full-ranged videos that contained 86 histologically confirmed polyps.Finally,we conducted a selfcontrolled observational study to validate the diagnostic performance of CADe in real-world colonoscopy with the main outcome measure of polyps per colonoscopy in Changhai Hospital.RESULTS The CADe was able to identify polyps in the test dataset with 95.0%sensitivity and 99.1%specificity.For colonoscopy videos,all 86 polyps were detected with 92.2%sensitivity and 93.6%specificity in frame-by-frame analysis.In the prospective validation,the sensitivity of CAD in identifying polyps was 98.4%(185/188).Folds,reflections of light and fecal fluid were the main causes of false positives in both the test dataset and clinical colonoscopies.Colonoscopists can detect more polyps(0.90 vs 0.82,P<0.001)and adenomas(0.32 vs 0.30,P=0.045)with the aid of CADe,particularly polyps<5 mm and flat polyps(0.65 vs 0.57,P<0.001;0.74 vs 0.67,P=0.001,respectively).However,high efficacy is not realized in colonoscopies with inadequate bowel preparation and withdrawal time(P=0.32;P=0.16,respectively).CONCLUSION CADe is feasible in the clinical setting and might help endoscopists detect more polyps and adenomas,and further confirmation is warranted.
基金financially supported by the National Key Research and Development Program of China(Nos.2018YFA0702903,2016YFB0701204)the Fundamental Research Funds for the Central Universities,China(No.DUT20GF102)。
文摘In order to broaden the application of wrought Mg alloy sheets in the automotive industry,the influence of Ca and Sm alloying on the texture evolution,mechanical properties,and formability of a hot-rolled Mg-2Zn-0.2Mn alloy was investigated by OM,XRD,SEM,EBSD,tensile tests,and Erichsen test.The results showed that the average grain size and basal texture intensity of Mg-2Zn-0.2Mn alloys were remarkably decreased after Ca and Sm additions.0.64 wt.%Ca or 0.48 wt.%Sm addition significantly increased the tensile strength,ductility and formability.Moreover,the synergetic addition of Sm and Ca improved the ductility and formability of Mg-2Zn-0.2Mn alloy,which was due to the change of Ca distribution and further reduction of the size of Ca-containing particles by Sm addition.The results provided a possibility of replacing RE elements with Ca and Sm in Mg alloys which bring about outstanding mechanical properties and formability.
基金supported by National Energy R&D Center of Petroleum Refining Technology of China(RIPP,SINOPEC)National Key Research and Development Program of China(No.2017YFA0304203)+5 种基金Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China(No.IRT_17R70)National Natural Science Foundation of China(Nos.61975103,61875108,61775125 and 11434007)Industrial Application Innovation Project(No.627010407)Scientific and Technological Innovation Project of Shanxi Gemeng US-China Clean Energy R&D Center Co.,Ltd111 Project(D18001)Fund for Shanxi‘1331KSC’。
文摘Although laser-induced breakdown spectroscopy(LIBS),as a fast on-line analysis technology,has great potential and competitiveness in the analysis of chemical composition and proximate analysis results of coal in thermal power plants,the measurement repeatability of LIBS needs to be further improved due to the difficulty in controlling the stability of the generated plasmas at present.In this paper,we propose a novel x-ray fluorescence(XRF) assisted LIBS method for high repeatability analysis of coal quality,which not only inherits the ability of LIBS to directly analyze organic elements such as C and H in coal,but also uses XRF to make up for the lack of stability of LIBS in determining other inorganic ash-forming elements.With the combination of elemental lines in LIBS and XRF spectra,the principal component analysis and the partial least squares are used to establish the prediction model and perform multi-elemental and proximate analysis of coal.Quantitative analysis results show that the relative standard deviation(RSD) of C is 0.15%,the RSDs of other elements are less than 4%,and the standard deviations of calorific value,ash content,sulfur content and volatile matter are 0.11 MJ kg,0.17%,0.79% and 0.41%respectively,indicating that the method has good repeatability in determination of coal quality.This work is helpful to accelerate the development of LIBS in the field of rapid measurement of coal entering the power plant and on-line monitoring of coal entering the furnace.
