Quantifying differences in secondary organic aerosols(SOAs)between the preindustrial period and the present day is crucial to assess climate forcing and environmental effects resulting from anthropogenic activities.Th...Quantifying differences in secondary organic aerosols(SOAs)between the preindustrial period and the present day is crucial to assess climate forcing and environmental effects resulting from anthropogenic activities.The lack of vegetation information for the preindustrial period and the uncertainties in describing SOA formation are two leading factors preventing simulation of SOA.This study calculated the online emissions of biogenic volatile organic compounds(VOCs)in the Aerosol and Atmospheric Chemistry Model of the Institute of Atmospheric Physics(IAP-AACM)by coupling the Model of Emissions of Gases and Aerosols from Nature(MEGAN),where the input vegetation parameters were simulated by the IAP Dynamic Global Vegetation Model(IAP-DGVM).The volatility basis set(VBS)approach was adopted to simulate SOA formation from the nontraditional pathways,i.e.,the oxidation of intermediate VOCs and aging of primary organic aerosol.Although biogenic SOAs(BSOAs)were dominant in SOAs globally in the preindustrial period,the contribution of nontraditional anthropogenic SOAs(ASOAs)to the total SOAs was up to 35.7%.In the present day,the contribution of ASOAs was 2.8 times larger than that in the preindustrial period.The contribution of nontraditional sources of SOAs to SOA was as high as 53.1%.The influence of increased anthropogenic emissions in the present day on BSOA concentrations was greater than that of increased biogenic emission changes.The response of BSOA concentrations to anthropogenic emission changes in the present day was more sensitive than that in the preindustrial period.The nontraditional sources and the atmospheric oxidation capability greatly affect the global SOA change.展开更多
Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction(HER)remains a significant challenge.Here,a novel and efficient cobalt(Co),ruthenium(Ru)bimetallic ...Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction(HER)remains a significant challenge.Here,a novel and efficient cobalt(Co),ruthenium(Ru)bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes(CoRu@N-CNTs),was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis.Benefiting from the electronic communication between Co and Ru sites,the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity.To deliver a current density of 10 mA·cm^(-2),it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec^(-1)in 1 mol·L^(-1)potassium hydroxide(KOH)solution,outperforming the benchmark Pt/C catalyst.The present work would pave a new way towards the design and construction of an efficient electrocatalyst for energy storage and conversion.展开更多
Ni-based composite coatings with a high content of tungsten carbides(Stelcar65composite coatings)were synthesized by plasma transferred arc(PTA)hardfacing.The welding parameters of Stelcar65composite coatings were opt...Ni-based composite coatings with a high content of tungsten carbides(Stelcar65composite coatings)were synthesized by plasma transferred arc(PTA)hardfacing.The welding parameters of Stelcar65composite coatings were optimized by orthogonal tests.The PTA welding parameters including welding current,powder feed rate and welding speed have significant influence on the tungsten carbide degradation.The values for the optimum welding current,powder feed rate and welding speed were determined to be100A,25g/min and40mm/min,respectively.The produced WC/Ni-based composite coatings were crack-and degradation-free.The microstructure of deposited layers,as well as the microstructure and microhardness of the optimal coating were further analyzed.展开更多
Four kinds of cryptomelane-type octahedral molecular sieve(OMS)-2-X(the X represents the molar ratio of KMnO4/MnAc2) were prepared as catalytic materials for ozone decomposition through a one-step hydrothermal reactio...Four kinds of cryptomelane-type octahedral molecular sieve(OMS)-2-X(the X represents the molar ratio of KMnO4/MnAc2) were prepared as catalytic materials for ozone decomposition through a one-step hydrothermal reaction of KMnO4 and MnAc2, by changing their molar ratios. These samples were characterized by N2 adsorption–desorption, X-ray di raction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), temperature programmed reduction by H2(H2-TPR) and X-ray photoelectron spectroscopy(XPS). Among them, the OMS-2-0.7 sample showed the best O3 conversion of 92% under high relative humidity(RH) of 90% and gas hourly space velocity of 585,000 h-1. This was accordingly thought as a possible way for purifying ozone-containing waste gases under high RH atmospheres. The e ciency of ozone decomposition of the prepared OMS-2-X sample was found to be related to specific surface area, particle size, surface oxygen vacancies, and Mn3+ cation amounts. The one-step hydrothermal synthesis was shown to be a simple method to prepare the considerably active OMS-2 solids for ozone decomposition.展开更多
In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carb...In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carbon layers on the surface of the CNTs. By controlling the ratio of glucose to urea, nitrogen contents of up to 1.7 wt%were achieved. The nitrogen-doped carbon nanotube-supported Pd catalysts exhibited superior electrochemical activity for ethanol oxidation relative to the pristine CNTs.Importantly, a 1.5-fold increase in the specific activity was observed for the Pd/HTC-N1.67%CNTs relative to the catalyst without nitrogen doping(Pd/HTC-CNTs). Furtherexperiments indicated that the introduction of nitrogen species on the surface of the CNTs improved the Pd(0)loading and increased the binding energy.展开更多
A new scheme for the preparation of highly dispersed precious metal catalysts is proposed in this work. Samples of LaCol-xPtxO3/SiO2 （x = 0.03, 0.05, 0.07, 0.09, and 0.10） were prepared through a simple method of ci...A new scheme for the preparation of highly dispersed precious metal catalysts is proposed in this work. Samples of LaCol-xPtxO3/SiO2 （x = 0.03, 0.05, 0.07, 0.09, and 0.10） were prepared through a simple method of citrate acid complexa-tion combined with impregnation. In a nanocrystallite of LaCOl-xPtxO3, ions of lanthanum, cobalt, and platinum are evenly mixed at the atomic level and confined within the nanocrystallite. In the reduction process, platinum ions were reduced and migrated onto the surface of the nanocrystallite, and the platinum should be highly dispersed owing to the even mixing of the platinum ions in the precursor. When x = 0.05 or lower, the highest dispersion of Pt could be achieved. The highly dispersed Pt is stable, because of the strong interaction between Pt atoms and the support. The catalysts were characterized by BET surface area, temperature-programmed reduction, X-ray diffraction, transmission electron microscopy, CO temperature-programmed desorption, and turnover frequency. Compared with general precious metal Pt catalysts, the LaCo0.95Pt0.05O3/ SiO2 catalyst exhibited better activity for CO oxidation, and it maintained stability at a high temperature of 400 ℃ for 250 h with complete CO conversion.展开更多
We investigate the hot carrier injection effect(HCI)and how X-ray radiation impacts the HCI of 22-nm nFinFETs as a function of device geometry and irradiation bias conditions in this paper.In the HCI test,the degradat...We investigate the hot carrier injection effect(HCI)and how X-ray radiation impacts the HCI of 22-nm nFinFETs as a function of device geometry and irradiation bias conditions in this paper.In the HCI test,the degradation of threshold voltage and saturation current decreases with the increase of fin number,which means that HCI weakens when the fin number increases.The reason is attributed to the coupling effect between fins.Moreover,irradiation is shown to weaken the degradation during the subsequent hot carrier test.The influence of irradiation on HCI is more obvious with ON bias than that of OFF bias and transmission gate bias.It is supposed that the Si–H bonds can be broken by irradiation before the HCI test,which is one reason for the irradiation influence on HCI.Besides,trapped charges are generated in the shallow trench isolation by the radiation,which could reduce the channel electric field,and then weaken the HCI.展开更多
基金supported by the National Key R&D Program of China(Grant No.2020YFA0607801)the National Natural Science Foundation of China(Grant Nos.42007199 and 42377105)the National Key Scientific and Technological Infrastructure project“Earth System Science Numerical Simulator Facility”.
文摘Quantifying differences in secondary organic aerosols(SOAs)between the preindustrial period and the present day is crucial to assess climate forcing and environmental effects resulting from anthropogenic activities.The lack of vegetation information for the preindustrial period and the uncertainties in describing SOA formation are two leading factors preventing simulation of SOA.This study calculated the online emissions of biogenic volatile organic compounds(VOCs)in the Aerosol and Atmospheric Chemistry Model of the Institute of Atmospheric Physics(IAP-AACM)by coupling the Model of Emissions of Gases and Aerosols from Nature(MEGAN),where the input vegetation parameters were simulated by the IAP Dynamic Global Vegetation Model(IAP-DGVM).The volatility basis set(VBS)approach was adopted to simulate SOA formation from the nontraditional pathways,i.e.,the oxidation of intermediate VOCs and aging of primary organic aerosol.Although biogenic SOAs(BSOAs)were dominant in SOAs globally in the preindustrial period,the contribution of nontraditional anthropogenic SOAs(ASOAs)to the total SOAs was up to 35.7%.In the present day,the contribution of ASOAs was 2.8 times larger than that in the preindustrial period.The contribution of nontraditional sources of SOAs to SOA was as high as 53.1%.The influence of increased anthropogenic emissions in the present day on BSOA concentrations was greater than that of increased biogenic emission changes.The response of BSOA concentrations to anthropogenic emission changes in the present day was more sensitive than that in the preindustrial period.The nontraditional sources and the atmospheric oxidation capability greatly affect the global SOA change.
基金supported by the National Natural Science Foundation of China(No.52072226,U22A20144)Key Research and Development Program of Shaanxi(2024GX-YBXM-466)+1 种基金Science and Technology Program of Xi'an,China(22GXFW0013)Science and Technology Program of Weiyang District of Xi'an,China(202315)。
文摘Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction(HER)remains a significant challenge.Here,a novel and efficient cobalt(Co),ruthenium(Ru)bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes(CoRu@N-CNTs),was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis.Benefiting from the electronic communication between Co and Ru sites,the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity.To deliver a current density of 10 mA·cm^(-2),it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec^(-1)in 1 mol·L^(-1)potassium hydroxide(KOH)solution,outperforming the benchmark Pt/C catalyst.The present work would pave a new way towards the design and construction of an efficient electrocatalyst for energy storage and conversion.
基金Project (2016YFB0300502) supported by the National Key Research and Development Program of ChinaProjects (51601129,51775386) supported by the National Natural Science Foundation of China+2 种基金Project (16PJ1410000) supported by Shanghai Pujiang Program,ChinaProject (16ZR1438700) supported by the Natural Science Foundation of Shanghai,ChinaProject (TPL1706) supported by Traction Power State Key Laboratory of Southwest Jiaotong University,China
文摘Ni-based composite coatings with a high content of tungsten carbides(Stelcar65composite coatings)were synthesized by plasma transferred arc(PTA)hardfacing.The welding parameters of Stelcar65composite coatings were optimized by orthogonal tests.The PTA welding parameters including welding current,powder feed rate and welding speed have significant influence on the tungsten carbide degradation.The values for the optimum welding current,powder feed rate and welding speed were determined to be100A,25g/min and40mm/min,respectively.The produced WC/Ni-based composite coatings were crack-and degradation-free.The microstructure of deposited layers,as well as the microstructure and microhardness of the optimal coating were further analyzed.
基金financial support from the National Natural Science Foundation of China (No. U1862102)the Fundamental Research Funds for the Central Universities (XK1802-1, JD1819)
文摘Four kinds of cryptomelane-type octahedral molecular sieve(OMS)-2-X(the X represents the molar ratio of KMnO4/MnAc2) were prepared as catalytic materials for ozone decomposition through a one-step hydrothermal reaction of KMnO4 and MnAc2, by changing their molar ratios. These samples were characterized by N2 adsorption–desorption, X-ray di raction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), temperature programmed reduction by H2(H2-TPR) and X-ray photoelectron spectroscopy(XPS). Among them, the OMS-2-0.7 sample showed the best O3 conversion of 92% under high relative humidity(RH) of 90% and gas hourly space velocity of 585,000 h-1. This was accordingly thought as a possible way for purifying ozone-containing waste gases under high RH atmospheres. The e ciency of ozone decomposition of the prepared OMS-2-X sample was found to be related to specific surface area, particle size, surface oxygen vacancies, and Mn3+ cation amounts. The one-step hydrothermal synthesis was shown to be a simple method to prepare the considerably active OMS-2 solids for ozone decomposition.
基金financial support of the National Natural Science Foundation of China(Nos.51672045 and 11374053)Key Program of Universityindustry Collaboration from Science and Technology Department of Fujian Province(No.2015H6009)
文摘In this study, hydrothermal carbonization(HTC)was applied for surface functionalization of carbon nanotubes(CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carbon layers on the surface of the CNTs. By controlling the ratio of glucose to urea, nitrogen contents of up to 1.7 wt%were achieved. The nitrogen-doped carbon nanotube-supported Pd catalysts exhibited superior electrochemical activity for ethanol oxidation relative to the pristine CNTs.Importantly, a 1.5-fold increase in the specific activity was observed for the Pd/HTC-N1.67%CNTs relative to the catalyst without nitrogen doping(Pd/HTC-CNTs). Furtherexperiments indicated that the introduction of nitrogen species on the surface of the CNTs improved the Pd(0)loading and increased the binding energy.
基金financial support from the Tencent AI Lab Rhino-Bird Gift Fund(9229073)the Project by Shanghai Artificial Intelligence Laboratory(P22KS00111)the Starry Night Science Fund of Zhejiang University Shanghai Institute for Advanced Study。
基金supported by the National Natural Science Foundation of China(Nos.21576192,21776214)
文摘A new scheme for the preparation of highly dispersed precious metal catalysts is proposed in this work. Samples of LaCol-xPtxO3/SiO2 （x = 0.03, 0.05, 0.07, 0.09, and 0.10） were prepared through a simple method of citrate acid complexa-tion combined with impregnation. In a nanocrystallite of LaCOl-xPtxO3, ions of lanthanum, cobalt, and platinum are evenly mixed at the atomic level and confined within the nanocrystallite. In the reduction process, platinum ions were reduced and migrated onto the surface of the nanocrystallite, and the platinum should be highly dispersed owing to the even mixing of the platinum ions in the precursor. When x = 0.05 or lower, the highest dispersion of Pt could be achieved. The highly dispersed Pt is stable, because of the strong interaction between Pt atoms and the support. The catalysts were characterized by BET surface area, temperature-programmed reduction, X-ray diffraction, transmission electron microscopy, CO temperature-programmed desorption, and turnover frequency. Compared with general precious metal Pt catalysts, the LaCo0.95Pt0.05O3/ SiO2 catalyst exhibited better activity for CO oxidation, and it maintained stability at a high temperature of 400 ℃ for 250 h with complete CO conversion.
基金This work was supported by Youth Innovation Promotion Association CAS(2018473)the National Natural Science Foundation of China under Grant NO.12075313the West Light Foundation of The Chinese Academy of Sciences(Grant No.2019-XBQNXZ-A-003).
文摘We investigate the hot carrier injection effect(HCI)and how X-ray radiation impacts the HCI of 22-nm nFinFETs as a function of device geometry and irradiation bias conditions in this paper.In the HCI test,the degradation of threshold voltage and saturation current decreases with the increase of fin number,which means that HCI weakens when the fin number increases.The reason is attributed to the coupling effect between fins.Moreover,irradiation is shown to weaken the degradation during the subsequent hot carrier test.The influence of irradiation on HCI is more obvious with ON bias than that of OFF bias and transmission gate bias.It is supposed that the Si–H bonds can be broken by irradiation before the HCI test,which is one reason for the irradiation influence on HCI.Besides,trapped charges are generated in the shallow trench isolation by the radiation,which could reduce the channel electric field,and then weaken the HCI.
