Froth flotation is a separation process widely used in the mineral processing industry that depends on differences in particle surface properties to separate valuable materials from undesired gangue. In froth flotatio...Froth flotation is a separation process widely used in the mineral processing industry that depends on differences in particle surface properties to separate valuable materials from undesired gangue. In froth flotation, an addition of a surfactant, acting as frother is usually needed. The basic function of the frother is to produce a swarm of air bubbles, which remain sufficiently stable for the hydrophobic mineral particles to be captured by them. This Paper presents a combination method of a foaming agent-surfactant composition with desirable selectivity and foaming properties. Wherein 1-butanol (C4H10O) is a main flotation foaming agent, which decides bubble sizes in a collecting area;and tetraethylene glycol (C8H18O5) is an auxiliary foaming agent, which affects a rising velocity of the bubbles in the collecting area and a foaming capability in a selected area. Set concentrations of the two components are respectively 60 ppm for the 1-butanol and 120 ppm for the tetraethylene glycol. An addition sequence is the 1-butanol followed by the tetraethylene glycol. The dual advantages of the selectivity and foaming properties of the foaming agent-surfactant composition in the present disclosure are verified through a series of tests, and desirable yields can be obtained in practice.展开更多
The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. Ho...The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.展开更多
Temperate regions of the world are characterized by seasonal warm and cool temperature. Cool temperature enables the plant to undergo physiological processes essential for flowering and fruit bearing in the following ...Temperate regions of the world are characterized by seasonal warm and cool temperature. Cool temperature enables the plant to undergo physiological processes essential for flowering and fruit bearing in the following season. Failure of environments to provide chilling conditions required for the fruit cultivar results in deformed leaves, fruits, or barren trees. The present study was conducted to assess production and distribution of chilling hours in Kentucky environments. Weather data were provided by Kentucky Mesonet system for 50 counties over a 5-year period. A chilling unit is defined as a clock hour in which air temperature is between 0°C and 7.2°C. Temperature readings in this range were recorded from September through April. Average number of chilling hours observed in the study was 1556 overall, and ranged from 1463-1680 for sites, and 1473-1842 for years. Estimated chilling hours were more variable for years than for sites. Consistency of chilling results was high when measured by linear correlation and relative standard deviation statistical procedures. Accumulated chilling hours at the sites reached approximately 1000 by mid-January thereby meeting the requirements for many fruit crops. At that point, plants would be ready for bud break and become subject to freezing damage. The results indicated that chilling exceeded requirements for most Kentucky crops. This margin of excess has both negative and positive value. First, the plants become more vulnerable to freezing damage before winter weather is completed. The higher risk could be mitigated by growing cultivars with longer chilling requirements. Second, since warming has been shown to decrease chilling production, the margin of chilling hours could provide time for adjusting horticultural enterprises in Kentucky to global warming. Additional understanding of relationships between environments and chilling will contribute to perennial fruit production in temperate regions of the world.展开更多
文摘Froth flotation is a separation process widely used in the mineral processing industry that depends on differences in particle surface properties to separate valuable materials from undesired gangue. In froth flotation, an addition of a surfactant, acting as frother is usually needed. The basic function of the frother is to produce a swarm of air bubbles, which remain sufficiently stable for the hydrophobic mineral particles to be captured by them. This Paper presents a combination method of a foaming agent-surfactant composition with desirable selectivity and foaming properties. Wherein 1-butanol (C4H10O) is a main flotation foaming agent, which decides bubble sizes in a collecting area;and tetraethylene glycol (C8H18O5) is an auxiliary foaming agent, which affects a rising velocity of the bubbles in the collecting area and a foaming capability in a selected area. Set concentrations of the two components are respectively 60 ppm for the 1-butanol and 120 ppm for the tetraethylene glycol. An addition sequence is the 1-butanol followed by the tetraethylene glycol. The dual advantages of the selectivity and foaming properties of the foaming agent-surfactant composition in the present disclosure are verified through a series of tests, and desirable yields can be obtained in practice.
文摘The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.
文摘Temperate regions of the world are characterized by seasonal warm and cool temperature. Cool temperature enables the plant to undergo physiological processes essential for flowering and fruit bearing in the following season. Failure of environments to provide chilling conditions required for the fruit cultivar results in deformed leaves, fruits, or barren trees. The present study was conducted to assess production and distribution of chilling hours in Kentucky environments. Weather data were provided by Kentucky Mesonet system for 50 counties over a 5-year period. A chilling unit is defined as a clock hour in which air temperature is between 0°C and 7.2°C. Temperature readings in this range were recorded from September through April. Average number of chilling hours observed in the study was 1556 overall, and ranged from 1463-1680 for sites, and 1473-1842 for years. Estimated chilling hours were more variable for years than for sites. Consistency of chilling results was high when measured by linear correlation and relative standard deviation statistical procedures. Accumulated chilling hours at the sites reached approximately 1000 by mid-January thereby meeting the requirements for many fruit crops. At that point, plants would be ready for bud break and become subject to freezing damage. The results indicated that chilling exceeded requirements for most Kentucky crops. This margin of excess has both negative and positive value. First, the plants become more vulnerable to freezing damage before winter weather is completed. The higher risk could be mitigated by growing cultivars with longer chilling requirements. Second, since warming has been shown to decrease chilling production, the margin of chilling hours could provide time for adjusting horticultural enterprises in Kentucky to global warming. Additional understanding of relationships between environments and chilling will contribute to perennial fruit production in temperate regions of the world.
