The embodied energy/CO2 of buildings in China and Japan, which reflects the characteristic industrial efficiency ofbui｜ding materials, is described in this paper. The energy consumption and CO2 intensities for the do...The embodied energy/CO2 of buildings in China and Japan, which reflects the characteristic industrial efficiency ofbui｜ding materials, is described in this paper. The energy consumption and CO2 intensities for the dominant materials used in buildings are derived from the energy consumption in factories, and the energy consumption to produce equipment is derived from IO （input/output） analysis in order to compare the embodied energy/CO2 for buildings between China and Japan based on the same estimation method. Although the energy consumption of structures in China is two to three times greater than in Japan, the interior finish and air conditioning equipment, for example, are simpler and smaller. As a result, the embodied energy/CO2 of office buildings in China is only 10% to 20% greater than that of Japanese office buildings. Thus, the embodied energy/CO2 of buildings depends on both industrial efficiencies and building design trends of the country.展开更多
In this study, we looked at a method quantifying EEC （embodied energy and CO2） and the effect when we prolonged the building life time particularly through the durable improvement of the structure. Increasing the co...In this study, we looked at a method quantifying EEC （embodied energy and CO2） and the effect when we prolonged the building life time particularly through the durable improvement of the structure. Increasing the covering thickness of concrete for reinforcing bars and the earthquake-resistant strength are methods to increase the durability of the structure. The calculation method to obtain the quantity of concrete and reinforcing bars is provided. The EEC increase is evaluated from the 2005 input-output table in Japan. These results show that EE （embodied energy） in the construction phase is increased by 11% to 20% and EC （embodied CO2） 17% to 32%. However, annual EE is reduced 66% to 72% and EC 70% to 79%,展开更多
The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as constr...The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as construction （including manufacture of materials and equipment）, renewal （including repair work） and demolition. Energy and CO2 emission intensities in terms of 401 sectors were calculated, using the 2005 I-O （input-output） table in Japan. According to our case study conducted from the construction phase to demolition, the EC （embodied CO2） of an office building used for 60 years is 12,044 t-CO2 and 1,093 kg-CO2/m^2 in total. CO2 equivalent emissions （CO2e） by Freon gases, contained in building materials, equipment and devices, were also calculated. As the results, CO2e by insulators was 2% of the building＇s EC and CO2e by refrigerants was 9%-12% of the building＇s EC. It is important to keep reducing emissions of Freon gases contained in refrigerators.展开更多
In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related...In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related intensities and, at the same time, compared the building industry with industries at large for distribution margins and transportation. The analysis of distribution margins separately for middle and purchaser margins found that middle margins in the building industry are minor at 35% of the averages for all industries, while purchaser margins are sizable at 1.8 times, proving that it is an industry for which local production for local consumption is quite effective. CO2 emissions resulting from transportation in the building industry were calculated and concisely characterized. Although the ratio of transportation CO2 emissions to total CO2 emissions in each industry finds almost no difference between general industries and the building industry, transportation CO2 emissions per production value are two to three times heavier than those from general industries to be justified as a transportation-intensive industry.展开更多
基金supported in part by the IEA/EBC/Annex57 Committee of Japan,organized through the IBEC(Institute for Building Environment and Energy Conservation).
文摘The embodied energy/CO2 of buildings in China and Japan, which reflects the characteristic industrial efficiency ofbui｜ding materials, is described in this paper. The energy consumption and CO2 intensities for the dominant materials used in buildings are derived from the energy consumption in factories, and the energy consumption to produce equipment is derived from IO （input/output） analysis in order to compare the embodied energy/CO2 for buildings between China and Japan based on the same estimation method. Although the energy consumption of structures in China is two to three times greater than in Japan, the interior finish and air conditioning equipment, for example, are simpler and smaller. As a result, the embodied energy/CO2 of office buildings in China is only 10% to 20% greater than that of Japanese office buildings. Thus, the embodied energy/CO2 of buildings depends on both industrial efficiencies and building design trends of the country.
文摘In this study, we looked at a method quantifying EEC （embodied energy and CO2） and the effect when we prolonged the building life time particularly through the durable improvement of the structure. Increasing the covering thickness of concrete for reinforcing bars and the earthquake-resistant strength are methods to increase the durability of the structure. The calculation method to obtain the quantity of concrete and reinforcing bars is provided. The EEC increase is evaluated from the 2005 input-output table in Japan. These results show that EE （embodied energy） in the construction phase is increased by 11% to 20% and EC （embodied CO2） 17% to 32%. However, annual EE is reduced 66% to 72% and EC 70% to 79%,
文摘The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as construction （including manufacture of materials and equipment）, renewal （including repair work） and demolition. Energy and CO2 emission intensities in terms of 401 sectors were calculated, using the 2005 I-O （input-output） table in Japan. According to our case study conducted from the construction phase to demolition, the EC （embodied CO2） of an office building used for 60 years is 12,044 t-CO2 and 1,093 kg-CO2/m^2 in total. CO2 equivalent emissions （CO2e） by Freon gases, contained in building materials, equipment and devices, were also calculated. As the results, CO2e by insulators was 2% of the building＇s EC and CO2e by refrigerants was 9%-12% of the building＇s EC. It is important to keep reducing emissions of Freon gases contained in refrigerators.
文摘In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related intensities and, at the same time, compared the building industry with industries at large for distribution margins and transportation. The analysis of distribution margins separately for middle and purchaser margins found that middle margins in the building industry are minor at 35% of the averages for all industries, while purchaser margins are sizable at 1.8 times, proving that it is an industry for which local production for local consumption is quite effective. CO2 emissions resulting from transportation in the building industry were calculated and concisely characterized. Although the ratio of transportation CO2 emissions to total CO2 emissions in each industry finds almost no difference between general industries and the building industry, transportation CO2 emissions per production value are two to three times heavier than those from general industries to be justified as a transportation-intensive industry.
