Selective photocatalytic aerobic oxidation of methane to value-added chemicals offers a promising pathway for sustainable chemical industry,yet remains a huge challenge owing to the consecutive overoxidation of primar...Selective photocatalytic aerobic oxidation of methane to value-added chemicals offers a promising pathway for sustainable chemical industry,yet remains a huge challenge owing to the consecutive overoxidation of primary products.Here,a type II heterojunction were constructed in Ag-AgBr/ZnO to reduce the oxidation potential of stimulated holes and prevent the undesirable CH_(4) overoxidation side reactions.For photocatalytic oxidation of methane under ambient temperature,the products yield of 1499.6μmol gcat^(-1) h^(-1) with a primary products selectivity of 77.9%was achieved over Ag-AgBr/ZnO,which demonstrate remarkable improvement compared to Ag/ZnO(1089.9μmol gcat^(-1) h^(-1) ,40.1%).The superior activity and selectivity result from the promoted charge separation and the redox potential matching with methane activation after introducing AgBr species.Mechanism investigation elucidated that the photo-generated holes transferred from the valence band of ZnO to that of AgBr,which prevent H_(2)O oxidation and enhance the selective generation of•OOH radical.展开更多
Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to tr...Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels,secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas,whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.展开更多
The oxygen evolution reaction(OER)is an electrochemical bottleneck half-reaction in some important energy conversion systems(e.g.,water splitting),which is traditionally mediated by iridium oxides in acidic environmen...The oxygen evolution reaction(OER)is an electrochemical bottleneck half-reaction in some important energy conversion systems(e.g.,water splitting),which is traditionally mediated by iridium oxides in acidic environment.Perovskite-structured Ir-containing oxides(e.g.,SrIrO_(3))are a family of striking electrocatalysts due to their high specific activity,but this excellent quality is difficultly transferred to a nano-electrocatalyst with large active surface and good structural stability.Here,we present a synthesis method that produces a 2D ultrathin{001}-faceted SrIrO_(3)perovskite(2D-SIO)with a thickness of∼5 nm and high surface area(57.6 m^(2)g^(−1)).We show that 2D-SIO can serve as a highly active and stable electrocatalytic nanomaterial for OER under acidic conditions.This perovskite nanomaterial produces 10 mA cm^(−2)current density at a low overpotential(η,243 mV),and maintains its catalytic activity after 5000 continuous cyclic measurements.Besides ultrathin structure and large surface area,the exposed{001}facets are found to be the most crucial and unique structural factor for achieving high catalytic activity and structural stability.Our joint experimental and theoretical results demonstrate that these advantageous microstructural features of 2D-SIO endow it with a strong capability to generate the key O^(*)intermediates,and thereby facilitate O–O bond formation and the OER.展开更多
Realizing the layouts of analog/mixed-signal(AMS)integrated circuits(ICs)is a complicated task due to the high design flexibility and sensitive circuit performance.Compared with the advancements of digital IC layout a...Realizing the layouts of analog/mixed-signal(AMS)integrated circuits(ICs)is a complicated task due to the high design flexibility and sensitive circuit performance.Compared with the advancements of digital IC layout automation,analog IC layout design is still heavily manual,which leads to a more time-consuming and error-prone process.In recent years,significant progress has been made in automated analog layout design with emerging of several open-source frameworks.This paper firstly reviews the existing state-of-the art AMS layout synthesis frameworks with focus on the different approaches and their individual challenges.We then present recent research trends and opportunities in the field.Finally,we summaries the paper with open questions and future directions for fully-automating the analog IC layout.展开更多
Raptors share a common predatory lifestyle,but are different in food preferences and hunting behavior.The grip force and talons’grasping capabilities are fundamentally crucial for subduing and killing their prey to f...Raptors share a common predatory lifestyle,but are different in food preferences and hunting behavior.The grip force and talons’grasping capabilities are fundamentally crucial for subduing and killing their prey to feed,but the abilities and differences to generate force are less known.In this study,the entire pelvic muscles were dissected with the muscle mass and fibre length measured and physiological cross-sectional area counted in the Common Kestrel(Falco tinnunculus),Eurasian Sparrowhawk(Accipiter nisus),and Long-eared Owl(Asio otus).Statistical tests were performed to explore the possible differences in architectural parameters among species.These species were same in distributing the greatest proportion of muscle mass to the shank region and the digital flexor functional group,allocating more than 60%muscle mass in relation to total single leg muscle mass to the same seven individual muscles including flexor digitorum longus(FDL),flexor hallucis longus(FHL),and tibialis cranialis(TC)which are three major muscles responsible for talon closure.Interspecies differentiations were most present in the shank and tarsus instead of other regions of the leg,which might reflect their difference in hunting mode and foot use.Greater force-generation capacity of FHL and some anatomical features suggest that digits 1and 2 work together as an efficiently vise-like set,playing more critical role than digits 3–4 in foraging of diurnal raptors but to a different degree.In accordance with zygodactyl foot morphology,each digit of the Long-eared Owl plays a subequal role when hunting,evidenced by anatomical and architectural features.Because of its unique insertion to the base of the pygostyle,the striking numerical difference in the development of M.caudofemoralis was possibly related to raptors’flight behavior and feeding ecology.Concluded from anatomical and architectural aspects,the similarities and differences of the hindlimb musculature were correlated to common predatory lifestyle and different foraging behaviors in three raptor species.These results illustrated the underlying myological basis for the functional capacities of the leg muscles and may provide additional information useful in further biomechanical investigation and computer simulation.展开更多
The sensitivity and fidelity of surface electromyography(sEMG)signal monitoring is critical for muscle status and fatigue assessment,prosthetic control,and gesture recognition.However,the incompatible skin-electrode i...The sensitivity and fidelity of surface electromyography(sEMG)signal monitoring is critical for muscle status and fatigue assessment,prosthetic control,and gesture recognition.However,the incompatible skin-electrode interface and complex electrophysiological environment restrict the sensitive acquisition and accurate analysis of sEMG signals.Focused on the impedance of the skin-electrode interface issue,we developed an interfacial gel electrode patch with a tunable hydrogen bond network to simultaneously achieve a conformal interface,suitable adhesion,and high conductivity for sEMG signal monitoring.By exploiting hydroxyethylidene diphosphonic acid(HEDP)and 2-hydroxyphosphono-acetic acid(HPAA)as hydrogen bonding regulators were introduced into the polyvinyl alcohol(PVA)-based hydrogel network to regulate the hydrogen bond cross-linking network.As a result,the balance of elastic modulus,adhesion,and electrical conductivity of PVA-HEDP-HPAA(PHH)hydrogel are achieved.The reliable electrodeskin interface is manipulated to achieve conformal contact by matching the elastic modulus,reducing the gap of electrode-skin interface by adhesion,and promoting ion and electron conduction by electrical conductivity.The PHH electrode patches exhibit a lower interfacial impedance(12.56 kΩ)and a signal-to-noise ratio of 38.09±1.28 dB for accurate analysis of muscle strength and evaluation of the fatigue state.With the assistance of the artificial neural network algorithm,seven gestures can be recognized with 100%prediction accuracy.The interfacial gel electrode patch contributes a bio-matching electrophysiological platform for prosthetic control,human–machine interaction,and clinical or athletic auxiliary monitoring.展开更多
One-dimensional(1D)aramid nanofiber(ANF)based nanocomposite films have drawn increasing attentions in various applications due to their excellent mechanical properties and impressive chemical and thermal stabilities.H...One-dimensional(1D)aramid nanofiber(ANF)based nanocomposite films have drawn increasing attentions in various applications due to their excellent mechanical properties and impressive chemical and thermal stabilities.However,the large-area fabrication of aramid nanocomposite films with ultrastrong mechanical properties under mild conditions remains a great challenge.Here we present a facile superspreading-assisted strategy to produce aramid nanofiber based oriented layered nanocomposites using phase inversion process that occurs at the fully swollen hydrogel surfaces.The nanocomposite films based on ANF,carboxylation carbon tube(CNT–COOH),poly(vinyl alcohol)(PVA),and MXene nanosheet exhibit a tensile strength of up to 870.8±85 MPa,a Young’s modulus of 21.8±2.2 GPa,and outstanding toughness(up to 43.2±4.6 MJ/m^(3)),which are much better than those conventional aramid nanofiber based materials.Electrical conductivity of our nanocomposite films reaches the maximum of about 1100 S/m.The fabulous mechanical properties combination and continuous production capability render our strategy representing a promising direction for the development of high-performance nanocomposites.展开更多
Polymer composite fibers with superior properties such as excellent combined strength and toughness and biocompatibility can be used in high-tech applications of braided protective devices and smart wearable,however t...Polymer composite fibers with superior properties such as excellent combined strength and toughness and biocompatibility can be used in high-tech applications of braided protective devices and smart wearable,however the research of high-performance polymer composite fiber remains in the infant stage.Here we present a strategy to produce strong and tough anisotropic polymer nanocomposite fibers with orientedly aligned salt rods using mechanical stretching-assisted salting-out treatment.The prepared nanocomposite fibers have a tensile strength of up to 786±2.7 MPa and an elongation at break of 81%,and the anisotropic fibers exhibit good transmission of mechanical vibration in the longitudinal direction with high resolution.During the fabrication process,the salt builds up into oriented rods during the directional salting process,and the polymer is confined to the 150 nm domain between the rods after the solvent is completely evaporated,giving the nanocomposite fibers superior mechanical properties.The presented strategy can be applied to the continuous mass production of nanocomposite fibers and is also generalizable to other polymer nanocomposites,which could extend the applicability of nanocomposite fibers to conditions involving more demanding mechanical loading and mechanical vibration transmission.展开更多
As an energy-free cooling technique,radiative cooling has garnered significant attention in the field of energy conservation.However,traditional radiative cooling films often possess static optical properties and thei...As an energy-free cooling technique,radiative cooling has garnered significant attention in the field of energy conservation.However,traditional radiative cooling films often possess static optical properties and their inherent opacity limits their applications in building such as windows.Therefore,there exists a requirement for passive radiative cooling films endowed with adjustable transmittance.Here we report the porous block copolymer films with self-adjustable optical transmittance and passive radiative cooling.In a result,the film exhibited a high solar reflectance(0.3-2.5μm)of 96.9%and a high infrared emittance(8-13μm)of 97.9%.Outdoor experiments demonstrated that the film surface temperature was 6.6℃lower than ambient temperature,with a cooling power of 104.8 W·m^(-2).In addition,the film’s transmittance can be regulated by altering the polarity of the post-processing solvent,providing an effective approach for regulating indoor light intensity and thermal balance,thereby enhancing the applicability of radiative cooling.展开更多
Biomaterials have been persistently focused owing to their intricate design and efficient operation.In order to satisfy the demands of life and medical sciences,large amounts of biomaterials capable of interacting wit...Biomaterials have been persistently focused owing to their intricate design and efficient operation.In order to satisfy the demands of life and medical sciences,large amounts of biomaterials capable of interacting with living systems have been created,thereby achieving the diagnosis,treatment or replacement of cells,tissues,and organs.After continuous evolution for billions of years,living organisms have eventually developed sophisticated multi-scale structures with diverse biological functions to adapt to the external environment.展开更多
The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an over...The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.展开更多
Efficient light absorption and trapping are of vital importance for the solar water evaporation by hydrogel-based photothermal conversion materials.Conventional strategies are focused on the development of the composi...Efficient light absorption and trapping are of vital importance for the solar water evaporation by hydrogel-based photothermal conversion materials.Conventional strategies are focused on the development of the composition and structure of the hydrogers internal network.In our point of view,the importance of the surface structure of hydrogel has usually been underestimated or ignored.Here inspired by the excellent absorbance and water transportation ability of biological surface structure,the hierarchical structured hydrogel evaporators(HSEs)increased the light absorption,trapping,water transportation and water-air interface,which is the beneficial photothermal conversion and water evaporation.The HSEs showed a rapid evaporation rate of 1.77 kg·m^(-2)·h^(-1)at about 92%energy efficiency under one sun(1 kW·m^(-2)).Furthermore,the superhydrophilic window device was used in this work to collect the condensed water,which avoids the light-blocking caused by the water mist formed by the small droplets and the problem of the droplets stick on the device dropping back to the bulk water.Integrated with the excellent photothermal conversion hydrogel and superhydrophilic window equipment,this work provides efficient evaporation and desalination of hydrogel-based solar evaporators in practical large-scale applications.展开更多
Stimuli-responsive hydrogels have become one of the most popular artificial soft materials due to their excellent adaption to complex environments. Thermoresponsive hydrogels triggered by temperature change can be eff...Stimuli-responsive hydrogels have become one of the most popular artificial soft materials due to their excellent adaption to complex environments. Thermoresponsive hydrogels triggered by temperature change can be efficiently utilized in many applications. However, these thermoresponsive hydrogels mostly cannot recover their mechanical states under large strain during the process. Herein, we utilize the heterogeneous comb-type polymer network with semicrystalline hydrophobic side chains to design self-recovery semi-crystalline hydrogels. Based on hydrophilic/hydrophobic cooperative complementary interaction and heterogeneous polymer network, hydrogels can be endowed with excellent thermosensitive properties and mechanical performance. The hydrogels exhibit high compressive strength(7.57 MPa) and compressive modulus(1.76 MPa) due to the semi-crystalline domains formed by association of the hydrophobic poly(ε-caprolactone) PCL. The melting-crystalline transition of PCL and elastic polymer network provide the hydrogels excellent thermomechanical performance and self-recovery property. Furthermore, the hydrogels exhibit shape memory behavior, which can be realized by simple process and smart surface patterning. With these excellent properties, our hydrogels can be applied in sensors, flexible devices and scaffolds for tissue engineering.展开更多
This paper presents a new method for recover- ing paleoporosity of sandstone reservoirs and quantita- tively defines the evolution process of porosity. This method is based on the principle that the present is the key...This paper presents a new method for recover- ing paleoporosity of sandstone reservoirs and quantita- tively defines the evolution process of porosity. This method is based on the principle that the present is the key to the past. We take the middle Es3 member in Niuzhuang Sag, Dongying Depression, and Bohai Bay Basin as an example. The method used in this study considers the present porosity as a constraint condition, and the influences of both constructive diagenesis and destructive diagenesis to divide the porosity evolution process into two independent processes, namely porosity increase and porosity decrease. An evolution model of sandstone porosity can be established by combining both the pore increase and pore decrease effects. Our study reveals that the porosity decrease model is a continuous function of burial depth and burial time, whereas the porosity increase model mainly occurs in an acidified window for paleo- temperature of 70℃ to 90℃. The porosity evolution process can be divided into the following phases： normal compaction, acidification and pore increase, and post- acidification compaction. Thus, the porosity evolution model becomes a piecewise function of three subsections. Examples show that the method can be applied effectively in recovering the paleoporosity of sandstone reservoirs and simulating the porosity evolution process.展开更多
Nanocomposite fibers have attracted intensive attentions owing to their promising applications in various fields. However, the fabrication of nanocomposite fibers with super toughness and strong strength under mild co...Nanocomposite fibers have attracted intensive attentions owing to their promising applications in various fields. However, the fabrication of nanocomposite fibers with super toughness and strong strength under mild conditions remains a great challenge. Here we present a facile flow-induced assembly strategy for the development of super-tough and strong nanocomposite fibers with highly ordered carbon nanotubes (CNTs), which can be induced by directional and fast flow on a grooved hydrogel surface. The prepared nanocomposite fibers show excellent mechanical properties, with a tensile strength up to 643±27 MPa and toughness as high as 77.3±3.4 MJ m^-3 at ultimate strain of 14.8±1.5%. This versatile and efficient flow-induced alignment strategy represents a promising direction for the development of high-performance nanocomposites for practical applications.展开更多
Ultra-dispersed Ni nanoparticles(7.5 nm)on nitrogen-doped carbon nanoneedles(Ni@NCNs)were prepared by simple pyrolysis of Ni-based metal–organic-framework for selective hydrogenation of halogenated nitrobenzenes to c...Ultra-dispersed Ni nanoparticles(7.5 nm)on nitrogen-doped carbon nanoneedles(Ni@NCNs)were prepared by simple pyrolysis of Ni-based metal–organic-framework for selective hydrogenation of halogenated nitrobenzenes to corresponding anilines.Two different crystallization methods(stirring and static)were compared and the optimal pyrolysis temperature was explored.Ni@NCNs were systematically characterized by wide analytical techniques.In the hydrogenation of p-chloronitrobenzene,Ni@NCNs-600(pyrolyzed at 600°C)exhibited extraordinarily high performance with 77.9 h^(–1)catalytic productivity and>99%p-chloroaniline selectivity at full p-chloronitrobenzene conversion under mild conditions(90°C,1.5 MPa H2),showing obvious superiority compared with reported Ni-based catalysts.Notably,the reaction smoothly proceeded at room temperature with full conversion and>99%selectivity.Moreover,Ni@NCNs-600 afforded good tolerance to various nitroarenes substituted by sensitive groups(halogen,nitrile,keto,carboxylic,etc.),and could be easily recycled by magnetic separation and reused for 5 times without deactivation.The adsorption tests showed that the preferential adsorption of–NO2 on the catalyst can restrain the dehalogenation of p-chloronitrobenzene,thus achieving high p-chloroaniline selectivity.While the high activity can be attributed to high Ni dispersion,special morphology,and rich pore structure of the catalyst.展开更多
Hydrogels, composed mainly of water trapped in three dimensional cross-linked polymer networks, have been widely utilized to construct underwater superoleophobic surfaces. However, the swelling nature and instability ...Hydrogels, composed mainly of water trapped in three dimensional cross-linked polymer networks, have been widely utilized to construct underwater superoleophobic surfaces. However, the swelling nature and instability of hydrogels under complex marine environment will weaken their underwater superoleophobicity. Herein, we synthesize structured poly （2-hydroxyethylmethacrylate） （PHEMA） hydrogels by using sandpaper as templates. The robust non-swelling of PHEMA hydrogel ensures that micro/nano-structures on the surface of PHEMA hydrogels can be well maintained. Moreover, when roughness Ra of about 3-4 bun, the surface has superior oil-repellency. Additionally, even after immersing in seawater for one-month, their breaking strength and toughness can be well kept. The non-swellable hydrogels with long-term stable under seawater superoleophobicity will promote the development of robust superoleophobic materials in marine antifouling coatings, biomedical devices and oil/water separation.展开更多
文摘Selective photocatalytic aerobic oxidation of methane to value-added chemicals offers a promising pathway for sustainable chemical industry,yet remains a huge challenge owing to the consecutive overoxidation of primary products.Here,a type II heterojunction were constructed in Ag-AgBr/ZnO to reduce the oxidation potential of stimulated holes and prevent the undesirable CH_(4) overoxidation side reactions.For photocatalytic oxidation of methane under ambient temperature,the products yield of 1499.6μmol gcat^(-1) h^(-1) with a primary products selectivity of 77.9%was achieved over Ag-AgBr/ZnO,which demonstrate remarkable improvement compared to Ag/ZnO(1089.9μmol gcat^(-1) h^(-1) ,40.1%).The superior activity and selectivity result from the promoted charge separation and the redox potential matching with methane activation after introducing AgBr species.Mechanism investigation elucidated that the photo-generated holes transferred from the valence band of ZnO to that of AgBr,which prevent H_(2)O oxidation and enhance the selective generation of•OOH radical.
基金financially supported by the “13th Five-Year Plan” National Science and Technology Major Projects(No. 2016ZX05002006-005)the National Natural Science Foundation of China (No. 41502147)the Sichuan Provincial University “nonconventional oil and gas” scientific research and innovation team construction plan
文摘Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels,secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas,whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.
基金the financial support from the National Key R&D Program of China(2017YFA0207800)the National Natural Science Foundation of China(NSFC)(21922507)+4 种基金the Fundamental Research Funds for the Central Universitiesthe financial support from NSFC(21901083)NSFC(21621001)the China Postdoctoral Science Foundation(2021M691202)the 111 Project(B17020)for additional financial support。
文摘The oxygen evolution reaction(OER)is an electrochemical bottleneck half-reaction in some important energy conversion systems(e.g.,water splitting),which is traditionally mediated by iridium oxides in acidic environment.Perovskite-structured Ir-containing oxides(e.g.,SrIrO_(3))are a family of striking electrocatalysts due to their high specific activity,but this excellent quality is difficultly transferred to a nano-electrocatalyst with large active surface and good structural stability.Here,we present a synthesis method that produces a 2D ultrathin{001}-faceted SrIrO_(3)perovskite(2D-SIO)with a thickness of∼5 nm and high surface area(57.6 m^(2)g^(−1)).We show that 2D-SIO can serve as a highly active and stable electrocatalytic nanomaterial for OER under acidic conditions.This perovskite nanomaterial produces 10 mA cm^(−2)current density at a low overpotential(η,243 mV),and maintains its catalytic activity after 5000 continuous cyclic measurements.Besides ultrathin structure and large surface area,the exposed{001}facets are found to be the most crucial and unique structural factor for achieving high catalytic activity and structural stability.Our joint experimental and theoretical results demonstrate that these advantageous microstructural features of 2D-SIO endow it with a strong capability to generate the key O^(*)intermediates,and thereby facilitate O–O bond formation and the OER.
基金supported in part by the NSF under Grant No.1704758,and the DARPA IDEA program.
文摘Realizing the layouts of analog/mixed-signal(AMS)integrated circuits(ICs)is a complicated task due to the high design flexibility and sensitive circuit performance.Compared with the advancements of digital IC layout automation,analog IC layout design is still heavily manual,which leads to a more time-consuming and error-prone process.In recent years,significant progress has been made in automated analog layout design with emerging of several open-source frameworks.This paper firstly reviews the existing state-of-the art AMS layout synthesis frameworks with focus on the different approaches and their individual challenges.We then present recent research trends and opportunities in the field.Finally,we summaries the paper with open questions and future directions for fully-automating the analog IC layout.
基金supported by the National Natural Science Foundation of China(Grant No.31970411)。
文摘Raptors share a common predatory lifestyle,but are different in food preferences and hunting behavior.The grip force and talons’grasping capabilities are fundamentally crucial for subduing and killing their prey to feed,but the abilities and differences to generate force are less known.In this study,the entire pelvic muscles were dissected with the muscle mass and fibre length measured and physiological cross-sectional area counted in the Common Kestrel(Falco tinnunculus),Eurasian Sparrowhawk(Accipiter nisus),and Long-eared Owl(Asio otus).Statistical tests were performed to explore the possible differences in architectural parameters among species.These species were same in distributing the greatest proportion of muscle mass to the shank region and the digital flexor functional group,allocating more than 60%muscle mass in relation to total single leg muscle mass to the same seven individual muscles including flexor digitorum longus(FDL),flexor hallucis longus(FHL),and tibialis cranialis(TC)which are three major muscles responsible for talon closure.Interspecies differentiations were most present in the shank and tarsus instead of other regions of the leg,which might reflect their difference in hunting mode and foot use.Greater force-generation capacity of FHL and some anatomical features suggest that digits 1and 2 work together as an efficiently vise-like set,playing more critical role than digits 3–4 in foraging of diurnal raptors but to a different degree.In accordance with zygodactyl foot morphology,each digit of the Long-eared Owl plays a subequal role when hunting,evidenced by anatomical and architectural features.Because of its unique insertion to the base of the pygostyle,the striking numerical difference in the development of M.caudofemoralis was possibly related to raptors’flight behavior and feeding ecology.Concluded from anatomical and architectural aspects,the similarities and differences of the hindlimb musculature were correlated to common predatory lifestyle and different foraging behaviors in three raptor species.These results illustrated the underlying myological basis for the functional capacities of the leg muscles and may provide additional information useful in further biomechanical investigation and computer simulation.
基金supported by the National Natural Science Foundation of China(grant nos.21874056 and 52003103)the National Key R&D Program of China(grant no.2016YFC1100502).
文摘The sensitivity and fidelity of surface electromyography(sEMG)signal monitoring is critical for muscle status and fatigue assessment,prosthetic control,and gesture recognition.However,the incompatible skin-electrode interface and complex electrophysiological environment restrict the sensitive acquisition and accurate analysis of sEMG signals.Focused on the impedance of the skin-electrode interface issue,we developed an interfacial gel electrode patch with a tunable hydrogen bond network to simultaneously achieve a conformal interface,suitable adhesion,and high conductivity for sEMG signal monitoring.By exploiting hydroxyethylidene diphosphonic acid(HEDP)and 2-hydroxyphosphono-acetic acid(HPAA)as hydrogen bonding regulators were introduced into the polyvinyl alcohol(PVA)-based hydrogel network to regulate the hydrogen bond cross-linking network.As a result,the balance of elastic modulus,adhesion,and electrical conductivity of PVA-HEDP-HPAA(PHH)hydrogel are achieved.The reliable electrodeskin interface is manipulated to achieve conformal contact by matching the elastic modulus,reducing the gap of electrode-skin interface by adhesion,and promoting ion and electron conduction by electrical conductivity.The PHH electrode patches exhibit a lower interfacial impedance(12.56 kΩ)and a signal-to-noise ratio of 38.09±1.28 dB for accurate analysis of muscle strength and evaluation of the fatigue state.With the assistance of the artificial neural network algorithm,seven gestures can be recognized with 100%prediction accuracy.The interfacial gel electrode patch contributes a bio-matching electrophysiological platform for prosthetic control,human–machine interaction,and clinical or athletic auxiliary monitoring.
基金supported by the National Key Research and Development Program of China(No.2022YFA1503000)the National Natural Science Foundation of China(Nos.22161142021 and 22175010).
文摘One-dimensional(1D)aramid nanofiber(ANF)based nanocomposite films have drawn increasing attentions in various applications due to their excellent mechanical properties and impressive chemical and thermal stabilities.However,the large-area fabrication of aramid nanocomposite films with ultrastrong mechanical properties under mild conditions remains a great challenge.Here we present a facile superspreading-assisted strategy to produce aramid nanofiber based oriented layered nanocomposites using phase inversion process that occurs at the fully swollen hydrogel surfaces.The nanocomposite films based on ANF,carboxylation carbon tube(CNT–COOH),poly(vinyl alcohol)(PVA),and MXene nanosheet exhibit a tensile strength of up to 870.8±85 MPa,a Young’s modulus of 21.8±2.2 GPa,and outstanding toughness(up to 43.2±4.6 MJ/m^(3)),which are much better than those conventional aramid nanofiber based materials.Electrical conductivity of our nanocomposite films reaches the maximum of about 1100 S/m.The fabulous mechanical properties combination and continuous production capability render our strategy representing a promising direction for the development of high-performance nanocomposites.
基金supported by the National Key Research and Development Project(No.2022YFA1503000)the National Natural Science Foundation of China(Nos.22161142021 and 22175010).
文摘Polymer composite fibers with superior properties such as excellent combined strength and toughness and biocompatibility can be used in high-tech applications of braided protective devices and smart wearable,however the research of high-performance polymer composite fiber remains in the infant stage.Here we present a strategy to produce strong and tough anisotropic polymer nanocomposite fibers with orientedly aligned salt rods using mechanical stretching-assisted salting-out treatment.The prepared nanocomposite fibers have a tensile strength of up to 786±2.7 MPa and an elongation at break of 81%,and the anisotropic fibers exhibit good transmission of mechanical vibration in the longitudinal direction with high resolution.During the fabrication process,the salt builds up into oriented rods during the directional salting process,and the polymer is confined to the 150 nm domain between the rods after the solvent is completely evaporated,giving the nanocomposite fibers superior mechanical properties.The presented strategy can be applied to the continuous mass production of nanocomposite fibers and is also generalizable to other polymer nanocomposites,which could extend the applicability of nanocomposite fibers to conditions involving more demanding mechanical loading and mechanical vibration transmission.
基金supported by the National Natural Science Foundation of China(Nos.22161142021,22175010,and 22275183).
文摘As an energy-free cooling technique,radiative cooling has garnered significant attention in the field of energy conservation.However,traditional radiative cooling films often possess static optical properties and their inherent opacity limits their applications in building such as windows.Therefore,there exists a requirement for passive radiative cooling films endowed with adjustable transmittance.Here we report the porous block copolymer films with self-adjustable optical transmittance and passive radiative cooling.In a result,the film exhibited a high solar reflectance(0.3-2.5μm)of 96.9%and a high infrared emittance(8-13μm)of 97.9%.Outdoor experiments demonstrated that the film surface temperature was 6.6℃lower than ambient temperature,with a cooling power of 104.8 W·m^(-2).In addition,the film’s transmittance can be regulated by altering the polarity of the post-processing solvent,providing an effective approach for regulating indoor light intensity and thermal balance,thereby enhancing the applicability of radiative cooling.
文摘Biomaterials have been persistently focused owing to their intricate design and efficient operation.In order to satisfy the demands of life and medical sciences,large amounts of biomaterials capable of interacting with living systems have been created,thereby achieving the diagnosis,treatment or replacement of cells,tissues,and organs.After continuous evolution for billions of years,living organisms have eventually developed sophisticated multi-scale structures with diverse biological functions to adapt to the external environment.
基金the support from the National Natural Science Foundation of China(22272004,62272041)the Fundamental Research Funds for the Central Universities(YWF-22-L-1256)+1 种基金the National Key R&D Program of China(2023YFC3402600)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.1870011182126)。
文摘The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.
基金We thank Prof.Cunming Yu and Dr.Xiao Xiao for providing COMSLO simulation.This work was supported by the National Natural Science Funds for Distinguished Young Scholar(No.21725401)the National Key R&D Program of China(No.2017YFA0207800)+1 种基金the 111 project(B14009)the Fundamental Research Funds for the Central Universities.
文摘Efficient light absorption and trapping are of vital importance for the solar water evaporation by hydrogel-based photothermal conversion materials.Conventional strategies are focused on the development of the composition and structure of the hydrogers internal network.In our point of view,the importance of the surface structure of hydrogel has usually been underestimated or ignored.Here inspired by the excellent absorbance and water transportation ability of biological surface structure,the hierarchical structured hydrogel evaporators(HSEs)increased the light absorption,trapping,water transportation and water-air interface,which is the beneficial photothermal conversion and water evaporation.The HSEs showed a rapid evaporation rate of 1.77 kg·m^(-2)·h^(-1)at about 92%energy efficiency under one sun(1 kW·m^(-2)).Furthermore,the superhydrophilic window device was used in this work to collect the condensed water,which avoids the light-blocking caused by the water mist formed by the small droplets and the problem of the droplets stick on the device dropping back to the bulk water.Integrated with the excellent photothermal conversion hydrogel and superhydrophilic window equipment,this work provides efficient evaporation and desalination of hydrogel-based solar evaporators in practical large-scale applications.
基金financially supported by the National Natural Science Foundation of China (21574004)the National Natural Science Funds for Distinguished Young Scholar (21725401)+2 种基金the Fundamental Research Funds for the Central Universitiesthe National ‘Young Thousand Talents Program’the China Postdoctoral Science Foundation (2017M620012)
文摘Stimuli-responsive hydrogels have become one of the most popular artificial soft materials due to their excellent adaption to complex environments. Thermoresponsive hydrogels triggered by temperature change can be efficiently utilized in many applications. However, these thermoresponsive hydrogels mostly cannot recover their mechanical states under large strain during the process. Herein, we utilize the heterogeneous comb-type polymer network with semicrystalline hydrophobic side chains to design self-recovery semi-crystalline hydrogels. Based on hydrophilic/hydrophobic cooperative complementary interaction and heterogeneous polymer network, hydrogels can be endowed with excellent thermosensitive properties and mechanical performance. The hydrogels exhibit high compressive strength(7.57 MPa) and compressive modulus(1.76 MPa) due to the semi-crystalline domains formed by association of the hydrophobic poly(ε-caprolactone) PCL. The melting-crystalline transition of PCL and elastic polymer network provide the hydrogels excellent thermomechanical performance and self-recovery property. Furthermore, the hydrogels exhibit shape memory behavior, which can be realized by simple process and smart surface patterning. With these excellent properties, our hydrogels can be applied in sensors, flexible devices and scaffolds for tissue engineering.
文摘This paper presents a new method for recover- ing paleoporosity of sandstone reservoirs and quantita- tively defines the evolution process of porosity. This method is based on the principle that the present is the key to the past. We take the middle Es3 member in Niuzhuang Sag, Dongying Depression, and Bohai Bay Basin as an example. The method used in this study considers the present porosity as a constraint condition, and the influences of both constructive diagenesis and destructive diagenesis to divide the porosity evolution process into two independent processes, namely porosity increase and porosity decrease. An evolution model of sandstone porosity can be established by combining both the pore increase and pore decrease effects. Our study reveals that the porosity decrease model is a continuous function of burial depth and burial time, whereas the porosity increase model mainly occurs in an acidified window for paleo- temperature of 70℃ to 90℃. The porosity evolution process can be divided into the following phases： normal compaction, acidification and pore increase, and post- acidification compaction. Thus, the porosity evolution model becomes a piecewise function of three subsections. Examples show that the method can be applied effectively in recovering the paleoporosity of sandstone reservoirs and simulating the porosity evolution process.
基金supported by the National Key R&D Program of China(2017YFA0207800)the National Natural Science Foundation of China(21574004)+4 种基金the National Natural Science Funds for Distinguished Young Scholar(21725401)the 111 project(B14009)the Fundamental Research Funds for the Central Universitiesthe National “Young Thousand Talents Program”the China Postdoctoral Science Foundation(2017M620012)
文摘Nanocomposite fibers have attracted intensive attentions owing to their promising applications in various fields. However, the fabrication of nanocomposite fibers with super toughness and strong strength under mild conditions remains a great challenge. Here we present a facile flow-induced assembly strategy for the development of super-tough and strong nanocomposite fibers with highly ordered carbon nanotubes (CNTs), which can be induced by directional and fast flow on a grooved hydrogel surface. The prepared nanocomposite fibers show excellent mechanical properties, with a tensile strength up to 643±27 MPa and toughness as high as 77.3±3.4 MJ m^-3 at ultimate strain of 14.8±1.5%. This versatile and efficient flow-induced alignment strategy represents a promising direction for the development of high-performance nanocomposites for practical applications.
基金This work was supported by the National Key R&D Program of China(Grant No.2021YFC2103704)the National Natural Science Foundation of China(Grant Nos.21878266 and 22078288)+1 种基金the Science and Technology Research Project of Henan Province(Grant No.222300420527)Program of Processing and Efficient Utilization of Biomass Resources of Henan Center for Outstanding Overseas Scientists(Grant No.GZS2022007).
文摘Ultra-dispersed Ni nanoparticles(7.5 nm)on nitrogen-doped carbon nanoneedles(Ni@NCNs)were prepared by simple pyrolysis of Ni-based metal–organic-framework for selective hydrogenation of halogenated nitrobenzenes to corresponding anilines.Two different crystallization methods(stirring and static)were compared and the optimal pyrolysis temperature was explored.Ni@NCNs were systematically characterized by wide analytical techniques.In the hydrogenation of p-chloronitrobenzene,Ni@NCNs-600(pyrolyzed at 600°C)exhibited extraordinarily high performance with 77.9 h^(–1)catalytic productivity and>99%p-chloroaniline selectivity at full p-chloronitrobenzene conversion under mild conditions(90°C,1.5 MPa H2),showing obvious superiority compared with reported Ni-based catalysts.Notably,the reaction smoothly proceeded at room temperature with full conversion and>99%selectivity.Moreover,Ni@NCNs-600 afforded good tolerance to various nitroarenes substituted by sensitive groups(halogen,nitrile,keto,carboxylic,etc.),and could be easily recycled by magnetic separation and reused for 5 times without deactivation.The adsorption tests showed that the preferential adsorption of–NO2 on the catalyst can restrain the dehalogenation of p-chloronitrobenzene,thus achieving high p-chloroaniline selectivity.While the high activity can be attributed to high Ni dispersion,special morphology,and rich pore structure of the catalyst.
基金supported by the National Natural Science Foundation (21574004, 21421061, 21434009, 21301036)the National Research Fund for Fundamental Key Projects (2012CB933800)+4 种基金the Fundamental Research Funds for the Central Universitiesthe National “Young Thousand Talents Program”Xiamen Southern Oceanographic Center (14GQT61HJ31)the Key Research Program of the Chinese Academy of Sciences (KJZD-EW-M01, KJZD-EW-M03)the Program of Introducing Talents of Discipline to Universities of China (B14009)
文摘Hydrogels, composed mainly of water trapped in three dimensional cross-linked polymer networks, have been widely utilized to construct underwater superoleophobic surfaces. However, the swelling nature and instability of hydrogels under complex marine environment will weaken their underwater superoleophobicity. Herein, we synthesize structured poly （2-hydroxyethylmethacrylate） （PHEMA） hydrogels by using sandpaper as templates. The robust non-swelling of PHEMA hydrogel ensures that micro/nano-structures on the surface of PHEMA hydrogels can be well maintained. Moreover, when roughness Ra of about 3-4 bun, the surface has superior oil-repellency. Additionally, even after immersing in seawater for one-month, their breaking strength and toughness can be well kept. The non-swellable hydrogels with long-term stable under seawater superoleophobicity will promote the development of robust superoleophobic materials in marine antifouling coatings, biomedical devices and oil/water separation.
