This paper deals with a design approach of a gait training machine based on a quantitative gait analysis. The proposed training machine is composed of a body weight support device and a cable-driven parallel robot. Th...This paper deals with a design approach of a gait training machine based on a quantitative gait analysis. The proposed training machine is composed of a body weight support device and a cable-driven parallel robot. This paper is focused on the cable-driven robot, which controls the pose of the lower limb through an orthosis placed on the patient＇s leg. The cable robot reproduces a normal gait movement through the motion of the orthosis. A motion capture system is used to perform the quantitative analysis of a normal gait, which will be used as an input to the inverse dynamic model of the cable robot. By means of an optimization algorithm, the optimal design parameters, which minimize the tensions in the cables, are determined. Two constraints are considered, i.e., a non-negative tension in the cables at all times, and a free cable/end-effector collision. Once the optimal solution is computed, a power analysis is carried out in order to size the robot actuators. The proposed approach can be easily extended for the design study of a similar type of cable robots.展开更多
We outline problems and potential solutions for feasible human-machine interfaces using cable-based parallel manipulators for physiotherapy applications.From an engineering perspective,we discuss the design constraint...We outline problems and potential solutions for feasible human-machine interfaces using cable-based parallel manipulators for physiotherapy applications.From an engineering perspective,we discuss the design constraints related to acceptance by patients and physiotherapist users.To date,most designs have focused on mobile platforms that are designed to be operated as an end-effector connected to human limbs for direct patient interaction.Some specific examples are illustrated from the authors' experience with prototypes available at Laboratory of Robotics and Mechatronics (LARM),Italy.展开更多
In this work, a systematic approach is presented to obtain the input-output equations of a single loop 4-bar spatial mechanisms. The dialytic method along with Denavit-Hartenberg parameters can be used to obtain these...In this work, a systematic approach is presented to obtain the input-output equations of a single loop 4-bar spatial mechanisms. The dialytic method along with Denavit-Hartenberg parameters can be used to obtain these equations efficiently. A genetic algorithm （GA） has been used to solve the problem of spatial mechanisms synthesis. Two types of mechanisms, e.g., RSCR and RSPC （R： revolute; S： spherical; C： cylindrical; P： prismatic）, have illustrated the application of the GA to solve the problem of function generation and path generation. In some cases, the GA method becomes trapped in a local minimum. A combined GA-fuzzy logic （GA-FL） method is then used to improve the final result. The results show that GAs, combined with an adequate description of the mechanism, are well suited for spatial mechanism synthesis problems and have neither difficulties inherent to the choice of the initial feasible guess, nor a problem of convergence, as it is the case for deterministic methods.展开更多
An assessment of the human motion repeatability for three selected Activities of Daily Living(ADL)is performed in this paper.These exercises were prescribed by an occupational therapist for the upper limb rehabilitati...An assessment of the human motion repeatability for three selected Activities of Daily Living(ADL)is performed in this paper.These exercises were prescribed by an occupational therapist for the upper limb rehabilitation.The movement patterns of five participants,recorded using a Qualisys motion capture system,are compared based on the Analysis of Variance(ANOVA)method.This survey is motivated by the need to find the appropriate task workspace of a 6-degrees of freedom cable-driven parallel robot for upper limb rehabilitation,which is able to reproduce the three selected exercises.This comparison is performed to justify,whether or not,there is enough similarity between the participants’gestures,and so a single reference trajectory can be adopted as the robot-prescribed workspace.Using the results of the comparative study,an optimization process of the sought robot design is carried out,where the structure size and the cable tensions simultaneously minimized.展开更多
文摘This paper deals with a design approach of a gait training machine based on a quantitative gait analysis. The proposed training machine is composed of a body weight support device and a cable-driven parallel robot. This paper is focused on the cable-driven robot, which controls the pose of the lower limb through an orthosis placed on the patient＇s leg. The cable robot reproduces a normal gait movement through the motion of the orthosis. A motion capture system is used to perform the quantitative analysis of a normal gait, which will be used as an input to the inverse dynamic model of the cable robot. By means of an optimization algorithm, the optimal design parameters, which minimize the tensions in the cables, are determined. Two constraints are considered, i.e., a non-negative tension in the cables at all times, and a free cable/end-effector collision. Once the optimal solution is computed, a power analysis is carried out in order to size the robot actuators. The proposed approach can be easily extended for the design study of a similar type of cable robots.
基金supported by the research project RORAS 2 of the Mediterranean Program funded by INRIA,France
文摘We outline problems and potential solutions for feasible human-machine interfaces using cable-based parallel manipulators for physiotherapy applications.From an engineering perspective,we discuss the design constraints related to acceptance by patients and physiotherapist users.To date,most designs have focused on mobile platforms that are designed to be operated as an end-effector connected to human limbs for direct patient interaction.Some specific examples are illustrated from the authors' experience with prototypes available at Laboratory of Robotics and Mechatronics (LARM),Italy.
基金Project supported by the CPER (Contrats de Projets Etat Région) Poitou-Charentes 2007-2013 (Program Project 10 "Imageset interactivités")the Tunisian Secretary of State of Scientific Research and Technology (SERST) through the contract LAB-MA 05
文摘In this work, a systematic approach is presented to obtain the input-output equations of a single loop 4-bar spatial mechanisms. The dialytic method along with Denavit-Hartenberg parameters can be used to obtain these equations efficiently. A genetic algorithm （GA） has been used to solve the problem of spatial mechanisms synthesis. Two types of mechanisms, e.g., RSCR and RSPC （R： revolute; S： spherical; C： cylindrical; P： prismatic）, have illustrated the application of the GA to solve the problem of function generation and path generation. In some cases, the GA method becomes trapped in a local minimum. A combined GA-fuzzy logic （GA-FL） method is then used to improve the final result. The results show that GAs, combined with an adequate description of the mechanism, are well suited for spatial mechanism synthesis problems and have neither difficulties inherent to the choice of the initial feasible guess, nor a problem of convergence, as it is the case for deterministic methods.
基金supported by the"PHC Utiquc"program of the French Ministry of Foreign Affairs and Ministry of Higher Education,Research and Innovation and the Tunisian Ministry of Higher Education and Scientific Research.P.n°19G1121the support of the Erasmus+KA 107 program.
文摘An assessment of the human motion repeatability for three selected Activities of Daily Living(ADL)is performed in this paper.These exercises were prescribed by an occupational therapist for the upper limb rehabilitation.The movement patterns of five participants,recorded using a Qualisys motion capture system,are compared based on the Analysis of Variance(ANOVA)method.This survey is motivated by the need to find the appropriate task workspace of a 6-degrees of freedom cable-driven parallel robot for upper limb rehabilitation,which is able to reproduce the three selected exercises.This comparison is performed to justify,whether or not,there is enough similarity between the participants’gestures,and so a single reference trajectory can be adopted as the robot-prescribed workspace.Using the results of the comparative study,an optimization process of the sought robot design is carried out,where the structure size and the cable tensions simultaneously minimized.
