The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron mic...The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, selected areaelectron diffraction （SAED）, hardness and electrical conductivity tests. Results show that after quenching in different ways, electricalconductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural agingstate is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, thesize of GP zones is 1.8-2.6 nm in matrix of the immersion quenched sample and it is 1.4-1.8 nm in matrix of both water mist andforced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 andits electrical conductivity is 30.5% （IACS） which are both higher than those of the immersion quenched sample. Therefore, watermist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.展开更多
According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST soft...According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST software based on accurate cooling curves measured by the modified Jominy specimen and temperature-dependent thermo-physical properties of 7 B50 alloy calculated using the JMat Pro software. Results show that the average cooling rate at 6 mm from the quenching surface and 420-230 ℃（quench sensitive temperature range） is 45.78℃/s. The peak-value of the SSHTC is 69 kW/（m^2·K） obtained at spray quenching for 0.4 s and the corresponding temperature of the quenching surface is 160 ℃. In the initial stage of spray quenching, the phenomenon called ＂temperature plateau＂ appears on the cooling curve of the quenching surface. The temperature range of this plateau is 160-170℃ with the duration about 3 s. During the temperature plateau, heat transfer mechanism of the quenching surface transforms from nucleate boiling regime to single-phase convective regime.展开更多
Human immunodeficiency virus (HIV) is the infectious agent causing acquired immu-nodeficiency syndrome (AIDS),a deadliest scourge of human society. Hepatitis C virus (HCV) is a major causative agent of chronic liver d...Human immunodeficiency virus (HIV) is the infectious agent causing acquired immu-nodeficiency syndrome (AIDS),a deadliest scourge of human society. Hepatitis C virus (HCV) is a major causative agent of chronic liver disease and infects an estimated 170 million people worldwide,resulting in a serious public health burden. Due to shared routes of transmission,co-infection with HIV and HCV has become common among individuals who had high risks of blood exposures. Among hemophiliacs the co-infection rate accounts for 85%; while among injection drug users (IDU) the rate can be as high as 90%. HIV can accelerate the progression of HCV-related liver disease,particularly when immunodeficiency has developed. Although the effect of HCV on HIV infection is controversial,most studies showed an increase in mortality due to liver disease. HCV may act as a direct cofactor to fasten the progression of AIDS and decrease the tolerance of highly active antiretroviral therapy (HARRT). Conversely,HAART-related hepatotoxicity may enhance the progression of liver fibrosis. Due to above complications,co-infection with HCV and HIV-1 has imposed a critical challenge in the management of these patients. In this review,we focus on the epidemiology and transmission of HIV and HCV,the impact of the two viruses on each other,and their treatment.展开更多
Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy stora...Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy storage.Achieving fine control of vertical alignment of anisotropic fillers(such as graphene,boron nitride(BN),and carbon fiber)remains challenging.This work presents a universal and scalable method for constructing vertically aligned structures of anisotropic fillers in composites assisted by the expansion flow(using2D BN platelets as a proof-of-concept).BN platelets in the silicone gel strip are oriented in a curved shape that includes vertical alignment in the central area and horizontal alignment close to strip surfaces.Due to the vertical orientation of BN in the central area of strips,a throughplane thermal conductivity as high as 5.65 W m^(-1) K^(-1) was obtained,which can be further improved to 6.54 W m^(-1) K^(-1) by combining BN and pitch-based carbon fibers.The expansion-flow-assisted alignment can be extended to the manufacture of a variety of polymer composites filled with 1D and 2D materials,which can find wide applications in batteries,electronics,and energy storage devices.展开更多
BACKGROUND Nuclear protein in testis(NUT) carcinoma is a rare aggressive malignant epithelial cell tumor, previously known as NUT midline carcinoma(NMC), characterized by an acquired rearrangement of the gene encoding...BACKGROUND Nuclear protein in testis(NUT) carcinoma is a rare aggressive malignant epithelial cell tumor, previously known as NUT midline carcinoma(NMC), characterized by an acquired rearrangement of the gene encoding NUT on chromosome 15q14. Due to the lack of characteristic pathological features, it is often underdiagnosed and misdiagnosed. A variety of methods can be used to diagnose NMC, including immunohistochemistry, karyotyping, fluorescence in situ hybridization, reverse transcription-polymerase chain reaction, and next-generation sequencing. So far, there is no standard treatment plan for NMC and the prognosis is poor, related to its rapid progression, easy recurrence, and unsatisfactory treatment outcome.CASE SUMMARY A 58-year-old female came to our hospital with a complaint of eye swelling and pain for 8 d. The diagnosis of NMC was confirmed after postoperative pathology and genetic testing. The patient developed nausea and vomiting, headache, and loss of vision in both eyes to blindness after surgery. Magnetic resonance imaging(MRI) and positron emission tomography/computed tomography(PET/CT) performed after 1.5 mo postoperatively suggested tumor recurrence. The patient obtained remission after radiation therapy to some extent and after initial treatment with anti-angiogenic drugs and sonodynamic therapy(SDT), but cannot achieve long-term stability and eventually developed distant metastases, with an overall survival of only 17 mo.CONCLUSION For patients with rapidly progressing sinus tumors and poor response to initial treatment, the possibility of NMC should be considered and immunohistochemical staining with anti-NUT should be performed as soon as possible, combined with genetic testing if necessary. CT, MRI, and PET/CT imaging are essential for the staging, management, treatment response assessment and monitoring of NMC. This case is the first attempt to apply heat therapy and SDT in the treatment of NMC, unfortunately, the prognosis remained poor.展开更多
基金Project(2016YFB0300801)supported by the National Key Research and Development Program of ChinaProject(51371045)supported by the National Natural Science Foundation of China
文摘The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, selected areaelectron diffraction （SAED）, hardness and electrical conductivity tests. Results show that after quenching in different ways, electricalconductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural agingstate is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, thesize of GP zones is 1.8-2.6 nm in matrix of the immersion quenched sample and it is 1.4-1.8 nm in matrix of both water mist andforced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 andits electrical conductivity is 30.5% （IACS） which are both higher than those of the immersion quenched sample. Therefore, watermist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.
基金Project(2016YFB0300801)supported by the National Key Research and Development Program of ChinaProject(51371045)supported by the National Natural Science Foundation of China
文摘According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST software based on accurate cooling curves measured by the modified Jominy specimen and temperature-dependent thermo-physical properties of 7 B50 alloy calculated using the JMat Pro software. Results show that the average cooling rate at 6 mm from the quenching surface and 420-230 ℃（quench sensitive temperature range） is 45.78℃/s. The peak-value of the SSHTC is 69 kW/（m^2·K） obtained at spray quenching for 0.4 s and the corresponding temperature of the quenching surface is 160 ℃. In the initial stage of spray quenching, the phenomenon called ＂temperature plateau＂ appears on the cooling curve of the quenching surface. The temperature range of this plateau is 160-170℃ with the duration about 3 s. During the temperature plateau, heat transfer mechanism of the quenching surface transforms from nucleate boiling regime to single-phase convective regime.
文摘Human immunodeficiency virus (HIV) is the infectious agent causing acquired immu-nodeficiency syndrome (AIDS),a deadliest scourge of human society. Hepatitis C virus (HCV) is a major causative agent of chronic liver disease and infects an estimated 170 million people worldwide,resulting in a serious public health burden. Due to shared routes of transmission,co-infection with HIV and HCV has become common among individuals who had high risks of blood exposures. Among hemophiliacs the co-infection rate accounts for 85%; while among injection drug users (IDU) the rate can be as high as 90%. HIV can accelerate the progression of HCV-related liver disease,particularly when immunodeficiency has developed. Although the effect of HCV on HIV infection is controversial,most studies showed an increase in mortality due to liver disease. HCV may act as a direct cofactor to fasten the progression of AIDS and decrease the tolerance of highly active antiretroviral therapy (HARRT). Conversely,HAART-related hepatotoxicity may enhance the progression of liver fibrosis. Due to above complications,co-infection with HCV and HIV-1 has imposed a critical challenge in the management of these patients. In this review,we focus on the epidemiology and transmission of HIV and HCV,the impact of the two viruses on each other,and their treatment.
基金supported by The National Key Research and Development Program of China(2020YFA0210704)。
文摘Orientation control of anisotropic one-dimensional(1D)and two-dimensional(2D)materials in solutions is of great importance in many fields ranging from structural materials design,the thermal management,to energy storage.Achieving fine control of vertical alignment of anisotropic fillers(such as graphene,boron nitride(BN),and carbon fiber)remains challenging.This work presents a universal and scalable method for constructing vertically aligned structures of anisotropic fillers in composites assisted by the expansion flow(using2D BN platelets as a proof-of-concept).BN platelets in the silicone gel strip are oriented in a curved shape that includes vertical alignment in the central area and horizontal alignment close to strip surfaces.Due to the vertical orientation of BN in the central area of strips,a throughplane thermal conductivity as high as 5.65 W m^(-1) K^(-1) was obtained,which can be further improved to 6.54 W m^(-1) K^(-1) by combining BN and pitch-based carbon fibers.The expansion-flow-assisted alignment can be extended to the manufacture of a variety of polymer composites filled with 1D and 2D materials,which can find wide applications in batteries,electronics,and energy storage devices.
基金Supported by The Beijing Science Foundation for Distinguished Young Scholars,No.JQ21025.
文摘BACKGROUND Nuclear protein in testis(NUT) carcinoma is a rare aggressive malignant epithelial cell tumor, previously known as NUT midline carcinoma(NMC), characterized by an acquired rearrangement of the gene encoding NUT on chromosome 15q14. Due to the lack of characteristic pathological features, it is often underdiagnosed and misdiagnosed. A variety of methods can be used to diagnose NMC, including immunohistochemistry, karyotyping, fluorescence in situ hybridization, reverse transcription-polymerase chain reaction, and next-generation sequencing. So far, there is no standard treatment plan for NMC and the prognosis is poor, related to its rapid progression, easy recurrence, and unsatisfactory treatment outcome.CASE SUMMARY A 58-year-old female came to our hospital with a complaint of eye swelling and pain for 8 d. The diagnosis of NMC was confirmed after postoperative pathology and genetic testing. The patient developed nausea and vomiting, headache, and loss of vision in both eyes to blindness after surgery. Magnetic resonance imaging(MRI) and positron emission tomography/computed tomography(PET/CT) performed after 1.5 mo postoperatively suggested tumor recurrence. The patient obtained remission after radiation therapy to some extent and after initial treatment with anti-angiogenic drugs and sonodynamic therapy(SDT), but cannot achieve long-term stability and eventually developed distant metastases, with an overall survival of only 17 mo.CONCLUSION For patients with rapidly progressing sinus tumors and poor response to initial treatment, the possibility of NMC should be considered and immunohistochemical staining with anti-NUT should be performed as soon as possible, combined with genetic testing if necessary. CT, MRI, and PET/CT imaging are essential for the staging, management, treatment response assessment and monitoring of NMC. This case is the first attempt to apply heat therapy and SDT in the treatment of NMC, unfortunately, the prognosis remained poor.
