Rainfall is an important factor in estimating the event mean concentration （EMC） which is used to quantify the washed-off pollutant concentrations from non-point sources （NPSs）. Pollutant loads could also be calcu...Rainfall is an important factor in estimating the event mean concentration （EMC） which is used to quantify the washed-off pollutant concentrations from non-point sources （NPSs）. Pollutant loads could also be calculated using rainfall, catchment area and runoff coefficient. In this study, runoff quantity and quality data gathered from a 28-month monitoring conducted on the road and parking lot sites in Korea were evaluated using multiple linear regression （MLR） to develop equations for estimating pollutant loads and EMCs as a function of rainfall variables. The results revealed that total event rainfall and average rainfall intensity are possible predictors of pollutant loads. Overall, the models are indicators of the high uncertainties of NPSs; perhaps estimation of EMCs and loads could be accurately obtained by means of water quality sampling or a long term monitoring is needed to gather more data that can be used for the development of estimation models.展开更多
Constructed wetland （CW） is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea fo...Constructed wetland （CW） is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus （59%） and residual phosphorus （32%） suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.展开更多
Using total suspended solid （TSS） removal efficiency and hydraulic retention time （HRT） as design parameters a design guideline of a settling basin in a constructed wetland （CW） was suggested; as well as managem...Using total suspended solid （TSS） removal efficiency and hydraulic retention time （HRT） as design parameters a design guideline of a settling basin in a constructed wetland （CW） was suggested; as well as management of sediment and particle in the settling basin. The CW was desiEned to treat the piggery wastewater effluent from a wastewater treatment plant during dry days and stonnwater runoff from the surrounding paved area during wet days. The first settling basin （FSB） in the CVV was theoretically designed with a total storage volume （TSV） of 453 ms and HRT of 5.5 hr. The amount of sediment and particles settled at the FSB was high due to the sedimentation and interception of plants in the CVV. Dredging of sediments was performed when the retention rate at the FSB decreased to approximately 80%. Findings showed that the mean flow rate was 21.8 m3/hr less than the designed flow rate of 82.8 m3/hr indicating that the FSB was oversize and operated with longer HRT （20.7 hr） compared to the design HRT. An empirical model to estimate the length of the settling basin in the CW was developed as a function of HRT and desired TSS removal efficiency. Using the minimum tolerable TSS removal efficiency of 30%, the length of the FSB was estimated to be 31.2 m with 11.8 hr HRT.展开更多
A stormwater management system utilizing the mechanisms of sedimentation and filtration/infiltration was developed and constructed for the immobilization of suspended solids and heavy metal constituents （Fe, Zn, Pb, ...A stormwater management system utilizing the mechanisms of sedimentation and filtration/infiltration was developed and constructed for the immobilization of suspended solids and heavy metal constituents （Fe, Zn, Pb, Cr, Cu, Cd, Ni） in runoff. Monitoring took place between May 2010 and November 2012 on a total of 24 storm events. This research on the fractionation of heavy metals in runoff and discharge of a stormwater system provided insight on the actual efficiency of the system and determined the implications for treatment of the particulate-bound and dissolved heavy metals in runoff. Results revealed that the partitioning of heavy metal load in runoff in either dissolved or particulate-bound were influenced by flow rate and total suspended solids load, and evident in high-intensity storm （rainfall-runoff event）. On the other hand, the partitioning of heavy metal load discharge from the stormwater system was more apparent during the early period of discharge having higher variability in dissolved than particulate-bound heavy metal. Findings revealed that fractionation of heavy metals played an important role in the performance of the stormwater system; thus, must be considered in designing stormwater systems. For the stormwater system to be effective, it is recommended to design the system treating not only the early period of a storm （first flush criteria） rather until the peak part of the hydrograph （high flow rate where partitioning was greatest） from a load basis.展开更多
The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in seri...The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.展开更多
The effectiveness of presettling basins as component of stormwater best management practice （BMP） technologies was investigated. Storm event monitoring and sediment collection were conducted from May 2009 to Novembe...The effectiveness of presettling basins as component of stormwater best management practice （BMP） technologies was investigated. Storm event monitoring and sediment collection were conducted from May 2009 to November 2012 on the presettling basins of the three BMP technologies designed to capture and treat stormwater runoff from highly impervious roads and parking lots. Data on captured runoff and sediment, total suspended solids （TSS） loadings, rainfall and runoff rate, sediment accumulation rate, as well as particle distribution and pollutant concentrations of sediment were gathered and analyzed along with the physical design characteristics of the presettling basins such as surface area and storage volume. Regression models were generated to determine significant relationships between design parameters. Results revealed that the storage volume ratio （ratio of storage volume of presettling basin to BMP） was an important parameter in designing the presettling basin of the BMP. For practicality, optimizing the design of the presetfling basin means that the storage volume ratio should be determined based on the desired captured amount of runoff and sediment from runoff to limit the frequency of maintenance caused by the accumulation of sediment. It was recommended that pretreatment of runoff should be employed when the site in which the BMP is to be sited has high TSS loading and runoff rate, and is subjected to high intensity rainfall.展开更多
基金provided by the Korean Ministry of Environment and Eco Star Project
文摘Rainfall is an important factor in estimating the event mean concentration （EMC） which is used to quantify the washed-off pollutant concentrations from non-point sources （NPSs）. Pollutant loads could also be calculated using rainfall, catchment area and runoff coefficient. In this study, runoff quantity and quality data gathered from a 28-month monitoring conducted on the road and parking lot sites in Korea were evaluated using multiple linear regression （MLR） to develop equations for estimating pollutant loads and EMCs as a function of rainfall variables. The results revealed that total event rainfall and average rainfall intensity are possible predictors of pollutant loads. Overall, the models are indicators of the high uncertainties of NPSs; perhaps estimation of EMCs and loads could be accurately obtained by means of water quality sampling or a long term monitoring is needed to gather more data that can be used for the development of estimation models.
基金provided by the Korean Ministry of Environment (MOE)
文摘Constructed wetland （CW） is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus （59%） and residual phosphorus （32%） suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.
基金supported by a grant (Code # 413-111-004) from Eco Innovation Project funded by Ministry of Environment of Korea government
文摘Using total suspended solid （TSS） removal efficiency and hydraulic retention time （HRT） as design parameters a design guideline of a settling basin in a constructed wetland （CW） was suggested; as well as management of sediment and particle in the settling basin. The CW was desiEned to treat the piggery wastewater effluent from a wastewater treatment plant during dry days and stonnwater runoff from the surrounding paved area during wet days. The first settling basin （FSB） in the CVV was theoretically designed with a total storage volume （TSV） of 453 ms and HRT of 5.5 hr. The amount of sediment and particles settled at the FSB was high due to the sedimentation and interception of plants in the CVV. Dredging of sediments was performed when the retention rate at the FSB decreased to approximately 80%. Findings showed that the mean flow rate was 21.8 m3/hr less than the designed flow rate of 82.8 m3/hr indicating that the FSB was oversize and operated with longer HRT （20.7 hr） compared to the design HRT. An empirical model to estimate the length of the settling basin in the CW was developed as a function of HRT and desired TSS removal efficiency. Using the minimum tolerable TSS removal efficiency of 30%, the length of the FSB was estimated to be 31.2 m with 11.8 hr HRT.
基金supported by the Eco-STAR Project under the grant of the Ministry of Environment in Korea (07-Ⅱ6)
文摘A stormwater management system utilizing the mechanisms of sedimentation and filtration/infiltration was developed and constructed for the immobilization of suspended solids and heavy metal constituents （Fe, Zn, Pb, Cr, Cu, Cd, Ni） in runoff. Monitoring took place between May 2010 and November 2012 on a total of 24 storm events. This research on the fractionation of heavy metals in runoff and discharge of a stormwater system provided insight on the actual efficiency of the system and determined the implications for treatment of the particulate-bound and dissolved heavy metals in runoff. Results revealed that the partitioning of heavy metal load in runoff in either dissolved or particulate-bound were influenced by flow rate and total suspended solids load, and evident in high-intensity storm （rainfall-runoff event）. On the other hand, the partitioning of heavy metal load discharge from the stormwater system was more apparent during the early period of discharge having higher variability in dissolved than particulate-bound heavy metal. Findings revealed that fractionation of heavy metals played an important role in the performance of the stormwater system; thus, must be considered in designing stormwater systems. For the stormwater system to be effective, it is recommended to design the system treating not only the early period of a storm （first flush criteria） rather until the peak part of the hydrograph （high flow rate where partitioning was greatest） from a load basis.
基金supported by a grant (Code#413-111-004) from Eco Innovation Project funded by the Ministry of Environment of the Korean government
文摘The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.
基金supported by the Eco-STAR Project under the grant of the Ministry of Environment in Korea (07-II-6)
文摘The effectiveness of presettling basins as component of stormwater best management practice （BMP） technologies was investigated. Storm event monitoring and sediment collection were conducted from May 2009 to November 2012 on the presettling basins of the three BMP technologies designed to capture and treat stormwater runoff from highly impervious roads and parking lots. Data on captured runoff and sediment, total suspended solids （TSS） loadings, rainfall and runoff rate, sediment accumulation rate, as well as particle distribution and pollutant concentrations of sediment were gathered and analyzed along with the physical design characteristics of the presettling basins such as surface area and storage volume. Regression models were generated to determine significant relationships between design parameters. Results revealed that the storage volume ratio （ratio of storage volume of presettling basin to BMP） was an important parameter in designing the presettling basin of the BMP. For practicality, optimizing the design of the presetfling basin means that the storage volume ratio should be determined based on the desired captured amount of runoff and sediment from runoff to limit the frequency of maintenance caused by the accumulation of sediment. It was recommended that pretreatment of runoff should be employed when the site in which the BMP is to be sited has high TSS loading and runoff rate, and is subjected to high intensity rainfall.
