Charge transport materials constitute a relatively large portion of the cost in the production of perovskite solar cells(PSCs).Therefore,developing cheap and efficient charge transport materials is of great significan...Charge transport materials constitute a relatively large portion of the cost in the production of perovskite solar cells(PSCs).Therefore,developing cheap and efficient charge transport materials is of great significance for the commercialization of PSCs.In this study,three low-cost hole transport materials(HTMs),specifically 4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(N,N-bis(4-methoxyphenyl)aniline)(TP-H),4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(3-methoxy-N,N-bis(4-methoxy-phenyl)aniline)(TP-OMe),and 4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(3-fluoro-N,N-bis(4-methoxyphenyl)aniline)(TP-F),were designed and synthesized using a bulky group-substi-tuted 2,2'-bithiophene core and methoxy-or F-functionalized triphenylamine derivatives.Compared to the HTMs without F atoms,TP-F using F substitution exhibited enhanced intermolecular packing,a lower highest occupied molecular orbital energy level,and increased hole mobility and conductivity.The PSC incorporating the doped TP-F as the hole transport layer achieved the highest power conversion efficiency(over 24%)among the three devices.The high performance of TP-F can be attributed to the passivation effect of S and F atoms on uncoordinated Pb2+within the perovskite(PVSK)film,which significantly reduces the density of defect states and the incidence of trap-mediated recombination in PSCs.This study demonstrates the effec-tiveness of the 3,3'-bis(4-methoxy-2,6-dimethylphenyl)-2,2'-bithiophene building block for constructing cost-effective HTMs and highlights the impact of F substitution on enhancing the photovoltaic performance of PSCs.展开更多
During atmospheric plasma spraying,a cooling process usually plays an important role in the coating quality,especially for the oxidation containment of metallic coatings.CuNiIn and Mo coatings were prepared using atmo...During atmospheric plasma spraying,a cooling process usually plays an important role in the coating quality,especially for the oxidation containment of metallic coatings.CuNiIn and Mo coatings were prepared using atmospheric plasma spraying with different cooling processes.The obtained coatings were characterized in terms of microstructure,microhardness and tensile strengths.The relation between the coating microstructure and their fretting fatigue behavior was emphasized.The results show that the sensitivity of Mo coatings to the cooling process is lower than CuNiIn coatings.The resistance to fretting fatigue is determined by the coating microhardness,correlated with the contents of oxides and pores.The fretting wear mechanisms of both the coatings are galling,third body abrasive wear and material transfer.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.U23A20371,U21A2078,and 22179042)the Natural Science Foundation of Fujian Province(Grant No.2023J06034)+1 种基金the Natural Science Foundation of Xiamen,China(Grant No.3502Z20227036)the Scientific Research Funds of Huaqiao University(Grant No.605-50Y23024).
文摘Charge transport materials constitute a relatively large portion of the cost in the production of perovskite solar cells(PSCs).Therefore,developing cheap and efficient charge transport materials is of great significance for the commercialization of PSCs.In this study,three low-cost hole transport materials(HTMs),specifically 4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(N,N-bis(4-methoxyphenyl)aniline)(TP-H),4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(3-methoxy-N,N-bis(4-methoxy-phenyl)aniline)(TP-OMe),and 4,4'-(3,3'-bis(4-methoxy-2,6-dimethylphenyl)-[2,2'-bithiophene]-5,5'-diyl)bis(3-fluoro-N,N-bis(4-methoxyphenyl)aniline)(TP-F),were designed and synthesized using a bulky group-substi-tuted 2,2'-bithiophene core and methoxy-or F-functionalized triphenylamine derivatives.Compared to the HTMs without F atoms,TP-F using F substitution exhibited enhanced intermolecular packing,a lower highest occupied molecular orbital energy level,and increased hole mobility and conductivity.The PSC incorporating the doped TP-F as the hole transport layer achieved the highest power conversion efficiency(over 24%)among the three devices.The high performance of TP-F can be attributed to the passivation effect of S and F atoms on uncoordinated Pb2+within the perovskite(PVSK)film,which significantly reduces the density of defect states and the incidence of trap-mediated recombination in PSCs.This study demonstrates the effec-tiveness of the 3,3'-bis(4-methoxy-2,6-dimethylphenyl)-2,2'-bithiophene building block for constructing cost-effective HTMs and highlights the impact of F substitution on enhancing the photovoltaic performance of PSCs.
基金the National Natural Science Foundation of China[grant numbers 51875424,51501137 and 51702244]the Fundamental Research Funds for the Central Universities[WUT:2019III033].
文摘During atmospheric plasma spraying,a cooling process usually plays an important role in the coating quality,especially for the oxidation containment of metallic coatings.CuNiIn and Mo coatings were prepared using atmospheric plasma spraying with different cooling processes.The obtained coatings were characterized in terms of microstructure,microhardness and tensile strengths.The relation between the coating microstructure and their fretting fatigue behavior was emphasized.The results show that the sensitivity of Mo coatings to the cooling process is lower than CuNiIn coatings.The resistance to fretting fatigue is determined by the coating microhardness,correlated with the contents of oxides and pores.The fretting wear mechanisms of both the coatings are galling,third body abrasive wear and material transfer.
