Massive vanadium additions as hard phases in powder metallurgy high-speed steels(PM HSS)lead to higher cost and bad machinability.In this study,ultrahigh alloy PM HSS with CPM121(10W-5Mo-4Cr-10V-9Co,wt.%)as the basic ...Massive vanadium additions as hard phases in powder metallurgy high-speed steels(PM HSS)lead to higher cost and bad machinability.In this study,ultrahigh alloy PM HSS with CPM121(10W-5Mo-4Cr-10V-9Co,wt.%)as the basic composition,was directly compacted and activation sintered with near-full density(>99.0%)using pre-oxidized and ball-mixed element and carbide powders.Niobium-alloyed steels(w(V)+w(Nb)=10 wt.%)show higher hardness and wear resistance,superior secondary-hardening ability and temper resistance.But excess niobium addition(>5 wt.%)leads to coarsened carbides and deteriorated toughness.EPMA results proved that niobium tends to distribute in MC carbides and forces element W to form M6C and WC carbides.Further,the role of rotary forging on properties of niobium-alloyed steels(S3)was researched.After rotary forging with deformation of 40%,the bending strength and fracture toughness of niobium-alloyed steels could be further improved by 20.74%and 43.86%compared with those of sample S3 without rotary forging,respectively.展开更多
The phase relationships in the Zn-Al-Ti system at 450 and 600℃ were experimentally determined using equilibrated alloys method.The specimens were investigated by means of scanning electron microscopy coupled with ene...The phase relationships in the Zn-Al-Ti system at 450 and 600℃ were experimentally determined using equilibrated alloys method.The specimens were investigated by means of scanning electron microscopy coupled with energy dispersive spectroscopy and X-ray diffractometry.Eleven and eight three-phase regions are confirmed in the 450 and 600℃ isothermal sections,respectively.The Ti2Al5 which only exists at high temperature(990-1199.4℃)in Ti-Al binary system is confirmed in two isothermal sections due to the dissolution of zinc.The T phase is confirmed as a ternary compound rather than an extension phase of TiZn3 at 450℃.The T2 phase is a new ternary phase stable at 450 and 600℃ in Zn-Al-Ti ternary system.展开更多
基金Projects(51771237,51704257)supported by the National Natural Science Foundation of ChinaProject(2019JJ60019)supported by the Joint Fund of Hunan Province,ChinaProject(17QDZ25)supported by the School Level Fund of Xiangtan University,China。
文摘Massive vanadium additions as hard phases in powder metallurgy high-speed steels(PM HSS)lead to higher cost and bad machinability.In this study,ultrahigh alloy PM HSS with CPM121(10W-5Mo-4Cr-10V-9Co,wt.%)as the basic composition,was directly compacted and activation sintered with near-full density(>99.0%)using pre-oxidized and ball-mixed element and carbide powders.Niobium-alloyed steels(w(V)+w(Nb)=10 wt.%)show higher hardness and wear resistance,superior secondary-hardening ability and temper resistance.But excess niobium addition(>5 wt.%)leads to coarsened carbides and deteriorated toughness.EPMA results proved that niobium tends to distribute in MC carbides and forces element W to form M6C and WC carbides.Further,the role of rotary forging on properties of niobium-alloyed steels(S3)was researched.After rotary forging with deformation of 40%,the bending strength and fracture toughness of niobium-alloyed steels could be further improved by 20.74%and 43.86%compared with those of sample S3 without rotary forging,respectively.
基金Project(51971189)supported by the National Natural Science Foundation of ChinaProject(2019JJ60011)supported by Zhuzhou Joint Fund of Hunan Natural Science Foundation,ChinaProject(KFBM20180001)supported by Jiangsu Key Laboratory of Materials Surface Science and Technology(Changzhou University),China。
文摘The phase relationships in the Zn-Al-Ti system at 450 and 600℃ were experimentally determined using equilibrated alloys method.The specimens were investigated by means of scanning electron microscopy coupled with energy dispersive spectroscopy and X-ray diffractometry.Eleven and eight three-phase regions are confirmed in the 450 and 600℃ isothermal sections,respectively.The Ti2Al5 which only exists at high temperature(990-1199.4℃)in Ti-Al binary system is confirmed in two isothermal sections due to the dissolution of zinc.The T phase is confirmed as a ternary compound rather than an extension phase of TiZn3 at 450℃.The T2 phase is a new ternary phase stable at 450 and 600℃ in Zn-Al-Ti ternary system.
